Loss of internet connection - limited connectivity

I have a weird problem I can go online without a problem, but after 6 hours or more, I can't connect to the internet. I open the Device Manager and under network adapter 1 is the controller L1 gigabit ethernet 10/100/1000base-T-this device is not working properly

2nd istap.hsd1ma.comcast.net has a yellow exclamtion point - this device cannot start. (Code 10) when I click Check for solutions it just turned off with any information or solutions? It also indicates that the driver is up-to-date

I'm baffled Please Help.Thanks

Hello

If you're connected directly to the Modem and do not have a cable/DSL router, you can consider to get a.

The router will keep the connection to the independent life of the computer and add the security of your system.

What is a router? http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

The example is a wireless router, but they all have cable connection too. You need not use the wireless part if you do not have a wireless computer.

Jack, MVP-Networking. EZLAN.NET

Tags: Windows

Similar Questions

  • Windows Update 12/15/2010 causes a loss of internet connectivity

    After you perform the update 12-15 and rebooted the computer creates a loss of internet connectivity on our HP Pavilion (Windows 7). I confirmed this because I deleted updates and connectivity returns.

    While this loss of connection the network and sharing Center shows that it is connected to the network and to the internet.

    There were 10 updates total, for most updates of security, IE 8 1 update and an update of the malicious attack tool.

    I disabled updates automatic for the moment, however really puzzled by this and don't find any problems in the database about it.

    Ideas? Thank you!!

    Hi BillHarsh,

    You can manually download and install the updates one by one from the Microsoft Download Center & check if the problem persists.

    Reference: in the Windows network connection issues

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Updates 2478658 KB and KB2518864 could not install and cause a loss of internet connectivity

    Hello

    Updates KB2478658 and KB2518864 cannot be installed in my SBS 2003 and caused a loss of internet connectivity.

    A while ago, I had a similar problem, i.e. do not install and loss of internet connectivity after you apply Windows Server 2003 SP2 on SBS. In this case, we have solved the problem with the support of a Customer Support person Microsoft, a service through which we paid.

    According to the suggestions that I found in the Microsoft Web sites, I managed to remove everything that was installed by the KB2478658 and KB2518864 updates and the reinstalled successfully. I did these manually because I don't have an internet connection.

    After you have reinstalled the above mentioned security updates, I repeated all the steps that led to the problem of the previous time. Among the steps taken, have been indicated in:

    Common problems of networking after you apply Windows Server 2003 SP2 on SBS

    http://blogs.technet.com/b/SBS/archive/2007/04/24/common-networking-issues-after-applying-Windows-Server-2003-SP2-on-SBS.aspx

    2. 948496 an update to turn off default SNP features is available for Windows Server 2003 and Small Business Server 2003-based computers

    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 948496

    Unfortunately, I was unable to restore connectivity to the internet this time.

    There is connection between the NETWORK card and router. I could ping the NIC IP address, but not that of the router (I get an "unreachable" message).

    I look forward to suggestions and recommendations to solve this problem. I have already paid once resolved a problem that was not directly caused by me and do not wish to do it again.

    Thanks in advance.

    JL

    Hi JL,.
     

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to a problem with small business server. It should be better in the Windows Server Forums of business.

    Please post your question in the Windows Small Business Server Forums.

  • Loss of internet connection on windows Vista Enterprise edition

    Hello

    I have a very serious problem, started only last Monday, I was using my laptop to last more than three years and having a problem just last week about the loss of internet connection after an hour or two after restarting the laptop.

    I thought that a virus could have an effect on this, so last night I reinstalled the operating system, but it does not work too. I connect to the internet via an ethernet to a motorola modem cable, do not know how to solve this problem now.

    I searched through various sites and followed quite a few options but that did not help. Still have a problem, someone please answer as soon as POSSIBLE. I have a very important session the game and on Fri and it will be very costly if I can't then I would like to be back to normal as soon as POSSIBLE.

    Go to the website of the manufacturer of your Modem > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 7. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver.

    I have a desktop running Windows 7 PC.  I recently had problems with loss of internet connection.  When I have trouble Shooting, told me that impossible to find a driver.  The adapter does not appear in Device Manager.  Help!

    Hello

    Definitely looks like a problem with the network device. Check with sound
    Support, their books online, the drivers and ask in their forums (if any)
    on known problems. If there is a control of the device shipped with the system
    Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
    with the support of its creator and other resources.

    You could also remove or disable the device and try a new add-on as one
    new card or device USD. None of those who are dear.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Anyone else experiencing the random loss of internet connection while using character animator?

    I seem to have a random loss of internet connection when performing character animator.

    Look into this further. It seems not related to the animation of character since today, it seems to happen randomly when running a simple browser. I think that maybe it's just my old router is about to die. I deleted my DNS cache and renewed my IP address and reset my router, so I hope that's all it took. Otherwise, it may be time for a new router.

  • Loss of internet connection

    I use a wireless adapter wg111t. Intermittently, my connection completely disappears and I have to turn off and restart. The loss of connection is accompanied by the mouse cursor (mouse Microsoft Wireless) gel, generally with the pointer to highlight text, then after about 30 seconds, that it thaws, but not internet connection and the adapter could also well be installed because it does not appear in Control Panel. I have the adapter plugged into USB port high speed, the adapter flashes but the light on the USB port for the USb port relevsant is released when the connection is lost. I checked if there are IRS conflicted and can't find anything, I will also be changed to a different mouse and still have the same problem.

    Hello

    ·         The question is limited to Internet Explorer?

    Try the methods provided below and see if they help to resolve the issue.

    Method 1:

    Step 1:

    I suggest boot mode safe mode with network and check if the problem persists.

    Networking in safe mode starts Windows in safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

    The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

    See the link below for more details:

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Step 2:

    If the problem persists in Mode safe mode with networking, you can perform the clean boot on the system and solve the problem.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note:

    After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: Reset TCP/IP stack

    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

    http://support.Microsoft.com/kb/299357

    Method 3:

    I suggest to download WG111T Software Version 2.1 from the link provided below and check if that helps resolve the issue.

    http://support.NETGEAR.com/app/products/model/A_ID/2559

    For further assistance on the product, you can also check out the link below.

    http://support.NETGEAR.com/app/products/model/A_ID/2559

  • Connect a HP OfficeJet Pro 8500 to router Netgear N600 loss of internet connection.

    Whenever the OfficeJet printer is connected to one of the ethernet to a Netgear N600 router ports, the internet connection is lost. Internet works without any complications, if the printer is not connected to the network. As soon as the ethernet cable from the printer is connected to the router (or a network switch) the internet connection is lost. If I look at the devices using the Netgear browser interface, everything seems appropriate. The printer uses DHCP and you will receive various IP addresses according to what remains is connected (e.g. 192.168.1.3). I've narrowed the problem to the printer, causing the loss of connectivity internet thie. Attach only my computer to the router (may be an iMac or a Windows XP system), internet works fine, plug the printer results in a loss of interest. Printer works fine and the documents can be printed after you connect to one of the ethernet ports.

    I tried to set a static IP address on the printer (e.g. 192.168.1.100) so that the attribution of a static address with the interface of Netgear using the MAC address of the printer - no approach fixes the problem. Netgear support is perplexed (they have even sent a replacement router, thinking it was defectiive, the two routers show the same problem). I have reset the printer to its default settings in order to eliminate potential conflicts with modified parameters. I also tried to change the speed of the link to something else than "Automatic", nothing seems to work.

    We will define an external static IP and DNS address for the printer.  I think that the external DNS will do the trick.

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    Your router have updated firmware?

  • Time Capsule or airport repeatedly loss of internet connection

    Greetings,

    Last month, I had a problem with my Apple Time Capsule and my cable company router intermittently lose Internet several times a day between.  This has happened several times a day.  My Time Capsule, Airport utility would show a 'green' status, but the status of 'Internet' is yellow.  It would resolve itself after several minutes, or if I rebooted the time Capsule.

    I did some troubleshooting and here's what I've been able to determine:

    • My internet business is the spectre of the Charter, and I use a Modem Arris.  The lights on the modem showed upstream internet connection was good, and technical support of the Charter stated that it was not a problem between the servers and the modem.  So, this seems to be a problem with the connection between the modem and the time Capsule.
    • Digging in the settings of the time Capsule, I noted that at one point defaults under the utility Airport-> Internet-> Internet Options-> "Configure IPv6" on the Time Capsule has changed its 'Link-Local only' to 'automatically '.  I am not sure when this change happened, but maybe with Time Capsule 7.7.3, firmware which I installed it right around the time the problems started.
    • I changed the IPv6 of Time Capsule settings go back to the "link-Local only" and since then have not lost to the Internet once

    So it seems to be an incompatibility between the IPv6 to my ISP configuration and configure IPv6 'automatically' on the Apple Time Capsule.  At this point the IPv4 and IPv6 protocols are still supported in the internet, but once IPv4 disappears at some point in the future I'll have to change the settings.  I hope that by then an update of the firmware from Apple or the modem from my ISP will fix this incompatibility.

    Hope this is useful to someone else!

    There is a document with settings for routers airport Apple on IPv6 with Comcast... I know that it works with TWC and it will probably also work with the Charter.

    http://mydeviceinfo.Xfinity.com/download.php?file_id=35

    There will be problems with dentition with IPv6 for awhile... Cox is the principal who is problematic at the moment and there are a number of positions that have also recommended parameters.

    IPv6 can also work if you use IPv4 dns servers of google... So the same instructions as the above document, but just simply replace the ISP DNS with values of google.

    Your Arris modem can also be a problem... We have noted problems with the model AC AE and TC WAN port with a number of modems... It's completely outside the issue of IPv6.

  • Loss of Internet connectivity on Tablet AT100

    I lost a full internet connectivity on my AT100 tablet.
    I did a hard reset and still no joy.
    My tablet is only 4 months of youth
    Can anyone help?
    Wubdub

    Hello

    Are you sure that in active in the Wlan settings Wlan?
    The WLan led should blink yellow if the WiFi is enabled.

    > I did a hard reset and still no joy.
    AFAIK, you can set the Android system to the default settings is recommended to do this
    As far as I know you can find this option in Apps-> settings-> privacy-> factory data-> erase tablet Reset Reset all

  • Equium A200-15i - loss of internet connection

    Hello!

    I have a really strange problem with my Equium A200-15i. My computer loses the connection with the internet very often.

    Connectivity shows that I am connected to the LAN or WLAN (if I use an ethernet cable). However, I am not connected to the internet. The network said "connected" icon, but everytime I open IE, the display shows 'page not available', my email client and communicators do not work as well.

    I checked all the wireless and ethernet settings and they are ok. Ive has run the diagnostics - ok. Device Manager indicates NICs (lan and wlan) are working properly. Router (BT HUB) is ok, there are more than two computers with it and they work perfectly (another computer laptop workes on wireless and PC is connected with the cable), so the problem is with my Toshiba only. Also, I say that we had a differenf router before and everything was good.

    When I restart my laptop it is internet connection but not for long. After a few reboots even who stops to help and I get the message "connected to the unidentified network, limmited to access" or sth like that. Then I restart the router security settings, fix it again and put the new settings into my laptop. This may help, but not for long... After a few days or a few hours sometimes everything again.

    Anyone, please help. I'm really, really confused :(:(

    Hello

    Please talk to WLAN and LAN connectivity separately? As a first step, it will be interesting to know what is with LAN connectivity. If you disable WLAN you are able to use permanent LAN connectivity?

    In most cases people have problems with WIFI but not so often with LAN connectivity because of that as a first step, that I just want to know if the local network works well. I have 3 laptops connected to my router and have never noticed any problem with the connection to the local network. I must say that I have the PPPOE settings. All of the TCP/IP parameters are set automatically to.

  • Airport Extreme, loss of internet connection of 5 GHz

    When I connect one of my devices (iPad, iPhone or Mac) to Airport Extreme, I see that the internet connection is down at any time. I started a continuous ping to an internal device and the external website using the ip address and I see a time-out from time to time to the external site, which may be more then 30 seconds. Internal devices remains accessible for ping on intellectual property. This occurs only on the 2.4 GHz and 5 GHz wifi doesn't have this problem.

    I'm confused because the problem is only with external destinations after the modem, and only for the 5 GHz range.

    The version of the software is 7.7.3

    The modem is a modem cable Docsis, Ubee EVW320

    Any help is welcome!

    Ubee EWV320 is not a simple modem, but a combination modem/wireless router or a gateway device. How did you get your AirPort Extreme configured to work with this device? What exact model of the extreme you have, and it is connected to the Ubee by wire or wireless?

  • HP compaq dc5100 sff: loss of internet connection on desktop after installing windows 10

    Update from windows 7 to windows 10 and I lost my internet connection. My connection is good, the son, all good router. Windows 10 seems to work great except no internet. She said "not connected-no connections are available. So is it not reconizing him actions card built in the Board of directors or what. I tried to reload the drivers. I can use any help I can get. I have a hp compaq dc5100 sff with 3 GHz, computer of office 2 GB of ram. I've updated my laptop and it works fine. If I can't understand, I guess I'll go back to windows 7. Ideals, let me know...

    Ok.

    The only suggestion I can offer would be to install the latest driver ethernet directly from BCM and see if it works.

    I think you need the first driver on the list for 32 bit.

    http://www.Broadcom.com/support/?GID=9

    You will need to manually install the driver for the adapter ethernet BCM in the Device Manager, as the file contains only the driver files and no setup.exe file.

  • Questioning the loss of internet connection stylized.

    Regularly, I lose my designer, internet connection. I can restore it using Windows Network Diagnostics, but although Windows indicates the issue is resolved, the fix is only temporary, and the connection always will once again, sometimes in the same session on the computer or when I log in again later. Windows tells me that the problem is "connection Wireless doesn'thave an IP configuration valid» How can I get a permanent solution to this problem?

    IanGrayUV:

    Your problem could be due to many different causes.

    Have you tried to stop your computer and all other devices Wi-wired and that communicate with your router. Then, shut down your router.

    Wait a few minutes and then reboot your router first... followed by each of the other Wi - Fi and defrost that communicates with your router (one device at a time... wait for it to start completely before proceeding to another).

    You have several computers that communicates wirelessly with your router? If so, is this another computer has the same symptoms?

    If you have only one computer, you have a friend with a laptop that can bring their home computer and try to connect to your router.

    How is your computer to the router? In the same room? On the other side of your House? The further and walls more that the wireless signals must travel (between the router and the computer) it is more likely that a connection may be lost randomly (I have a laptop computer in the same room as my router, and he sometimes loses the connection).

    Your router may get interference from all your neighbor who has a wireless router. Have you tried to set your router to use a different wireless channel?

    Try some/all the above tips and see if there is an improvement.

  • Updates, caused the loss of internet connection

    For the second time this year, after a Microsoft Update on my netbook Windows XP Home, I lost my internet connection. Two courses (June) updates involved are KB2518864 and KB2478658. I tried to restart the computer once or twice, and I still didn't have a connection. I did a system restore, and the internet connection is back. No idea what's going on? (Yes, I know, Robear, that it is wrong to use the system restore, but it seems to do the job.)

    I have tried to have reported the problem to Microsoft but had someone who did not speak English very well and was indifferent to the problem. When I said that the restoration of the system got the rear connection, he said, "so what do you get? He added: "We recommend you to install all the updates." I said it wouldn't do me any good to have the updates, if I could not then use the computer. He said that he would report the problem - but he was not asking for any personal information, and I don't have a file number.

    Another question: I installed all the high priority Patch Tuesday updates June, Thursday, June 16 - and told me that everything downloaded and installed OK. I have been informed (by the yellow shield) on the two new updates on Saturday, June 18. No idea why these two pointed to the end?

    Finally, I need these two updates (they are for the .NET Framework) if I'm not a programmer?

    Thank you!

    JO-Anne

    JO-Anne

    KB2518864 has a few known issues
    http://support.Microsoft.com/kb/2518864

    KB2518864 has a few known issues
    http://support.Microsoft.com/kb/2478658

    If you do not you leave your system vulnerable. If you lose your internet connection, you can remove if Add / Remove programs in Control Panel.

    Hide and not install it leave you vulnerable. I would try one at a time. If you lose your internet connection remove the cause of the problem. It is always useful to restrict the domain where the problem lies. Get even one reduced the vulnerability of your system.

    You brought up an incident report. You will have more information we hope to get the update problem problem solved...

    I would not bother to Robear. His behavior is sometimes irrational.

  • Pavilion dv7-6b55dx: loss of internet connectivity wireless with Win 10 update

    I have a Pavilion dv7-6b55dx notebook with Intel Centrino - N6150 wireless network card. I've recently updated to Win 7 to win 10 64-bit.  The first negative consequence is the deactivation of my wireless internet connection. The without wire/switch market stop on the keyboard is more worked as planned but simply tilted airplane mode on or off.  I followed HP troubleshooting for wireless connectivity problems associated with Windows 10 improvements, including the reinstall the NIC driver wireless, without any positive result.  It seems that 10 Windows does not recognize network N6150 map.

    Anyone know if there is a fix for this problem (Microsoft? HP? Intel?) In the meantime, I came back to the Windows 7 operating system.  If there is no patch or another solution at this moment I may decide to go with a wireless USB adapter, but prefer not to do this, if possible.

    I did not have a facility clean, but simply ran the standard upgrade ensuring once again I did it using a Wi - Fi and ethernet not.  It worked very well - fully operational wireless connectivity.  Thanks for pointing out the importance of having wireless enabled when you upgrade!

Maybe you are looking for