Windows Update 12/15/2010 causes a loss of internet connectivity

Similar Questions

• Updates 2478658 KB and KB2518864 could not install and cause a loss of internet connectivity

  Hello

  Updates KB2478658 and KB2518864 cannot be installed in my SBS 2003 and caused a loss of internet connectivity.

  A while ago, I had a similar problem, i.e. do not install and loss of internet connectivity after you apply Windows Server 2003 SP2 on SBS. In this case, we have solved the problem with the support of a Customer Support person Microsoft, a service through which we paid.

  According to the suggestions that I found in the Microsoft Web sites, I managed to remove everything that was installed by the KB2478658 and KB2518864 updates and the reinstalled successfully. I did these manually because I don't have an internet connection.

  After you have reinstalled the above mentioned security updates, I repeated all the steps that led to the problem of the previous time. Among the steps taken, have been indicated in:

  Common problems of networking after you apply Windows Server 2003 SP2 on SBS

  http://blogs.technet.com/b/SBS/archive/2007/04/24/common-networking-issues-after-applying-Windows-Server-2003-SP2-on-SBS.aspx

  2. 948496 an update to turn off default SNP features is available for Windows Server 2003 and Small Business Server 2003-based computers

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 948496

  Unfortunately, I was unable to restore connectivity to the internet this time.

  There is connection between the NETWORK card and router. I could ping the NIC IP address, but not that of the router (I get an "unreachable" message).

  I look forward to suggestions and recommendations to solve this problem. I have already paid once resolved a problem that was not directly caused by me and do not wish to do it again.

  Thanks in advance.

  JL

  Hi JL,.
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to a problem with small business server. It should be better in the Windows Server Forums of business.

  Please post your question in the Windows Small Business Server Forums.

• Updates, caused the loss of internet connection

  For the second time this year, after a Microsoft Update on my netbook Windows XP Home, I lost my internet connection. Two courses (June) updates involved are KB2518864 and KB2478658. I tried to restart the computer once or twice, and I still didn't have a connection. I did a system restore, and the internet connection is back. No idea what's going on? (Yes, I know, Robear, that it is wrong to use the system restore, but it seems to do the job.)

  I have tried to have reported the problem to Microsoft but had someone who did not speak English very well and was indifferent to the problem. When I said that the restoration of the system got the rear connection, he said, "so what do you get? He added: "We recommend you to install all the updates." I said it wouldn't do me any good to have the updates, if I could not then use the computer. He said that he would report the problem - but he was not asking for any personal information, and I don't have a file number.

  Another question: I installed all the high priority Patch Tuesday updates June, Thursday, June 16 - and told me that everything downloaded and installed OK. I have been informed (by the yellow shield) on the two new updates on Saturday, June 18. No idea why these two pointed to the end?

  Finally, I need these two updates (they are for the .NET Framework) if I'm not a programmer?

  Thank you!

  JO-Anne

  JO-Anne

  KB2518864 has a few known issues
  http://support.Microsoft.com/kb/2518864

  KB2518864 has a few known issues
  http://support.Microsoft.com/kb/2478658

  If you do not you leave your system vulnerable. If you lose your internet connection, you can remove if Add / Remove programs in Control Panel.

  Hide and not install it leave you vulnerable. I would try one at a time. If you lose your internet connection remove the cause of the problem. It is always useful to restrict the domain where the problem lies. Get even one reduced the vulnerability of your system.

  You brought up an incident report. You will have more information we hope to get the update problem problem solved...

  I would not bother to Robear. His behavior is sometimes irrational.

• Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Currently Windows Vista Home Premium SP1 x 86 (no patches since 2008). Currently, it has no AV and has not been connected to the internet yet. It will be behind a router.

  I had to redo the factory already reset after be connected to the net for 20 minutes and then a bunch of programs kept crashing saying Data Execution Prevention had to close the program StackHash and BEX error when executing update for HP drivers.

  Maybe I installed Kaspersky first next time?

  What should I do?

  Thank you!

  No problem. Install the updates. You can install the anti-virus later.

  Just don't start browsing the inet by updating.

• Loss of internet connection on windows Vista Enterprise edition

  Hello

  I have a very serious problem, started only last Monday, I was using my laptop to last more than three years and having a problem just last week about the loss of internet connection after an hour or two after restarting the laptop.

  I thought that a virus could have an effect on this, so last night I reinstalled the operating system, but it does not work too. I connect to the internet via an ethernet to a motorola modem cable, do not know how to solve this problem now.

  I searched through various sites and followed quite a few options but that did not help. Still have a problem, someone please answer as soon as POSSIBLE. I have a very important session the game and on Fri and it will be very costly if I can't then I would like to be back to normal as soon as POSSIBLE.

  Go to the website of the manufacturer of your Modem > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver.

  I have a desktop running Windows 7 PC.  I recently had problems with loss of internet connection.  When I have trouble Shooting, told me that impossible to find a driver.  The adapter does not appear in Device Manager.  Help!

  Hello

  Definitely looks like a problem with the network device. Check with sound
  Support, their books online, the drivers and ask in their forums (if any)
  on known problems. If there is a control of the device shipped with the system
  Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
  with the support of its creator and other resources.

  You could also remove or disable the device and try a new add-on as one
  new card or device USD. None of those who are dear.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Loss of internet connection with windows 8

  I bought recently (in the last 3 months), a desktop HP 110 and a Dell desktop all-in-one computer.  As long as windows 8 and I use ATT Uverse to provider for my network.  I also have a Microsoft Surface with windows 8 as connected to the network.

  On the desk tops HP and ell I keep giving up network and restart the computer to restore the network connection.  It can happen at any time during the operation. I had AT & T technicians come out mind 3 times he stood not a replacement and all the equipment and lines.  I HAV had computers swept for viruses, malware, etc. twice.

  Only the compatibility between 2 computers is windows 8.  Is this a problem of windows 8?

  Hello

  Suspect network drivers, although other factors may be in play and it
  the problem is probably a combination of factors. Don't forget to check with
  HP and Dell Support, their documentation online and the drivers and ask
  in their forums on known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/

  ===================================

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path? (Are not
  Assume that even a new router firmware updated.)

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Loss of Internet connection and Windows 7

  In our headquarters, we have a desktop system running Windows 7, but also an iMac.  The two are connected to Apple's Time Capsule, which serves as a router and a backup for the iMac hard drive. (our Internet connection is cable Internet, by the way.)

  Since upgrading from Windows Vista to Windows 7, the Windows 7 Desktop faces of frequent Internet connection errors.  Generally, it loses the connection to the Internet several times per day.

  Today, it's the worst event we've seen so far (since the upgrade to Windows 7 last week).  We usually only an Internet connection for about 2-3 minutes, then it is lost and needs to be repaired.

  We enter the control panel > network and sharing Center > issues > Internet connections

  Let us Windows 7 automatically diagnose and repair the problem.

  Whenever he goes through the stages of diagnosis and repair, it ends by "reset the connection area card."

  At the end of the process - after everything has been repaired - we get the following report:

  "Default gateway is not available - fixed.

  Should what measures we take to permanently solve this problem?

  Moreover, the iMac does NOT have Internet connection issues whatsoever.

  Thanks in advance!

  I don't know what you use to assign addresses, so I guess it's a router of some sort. You will need to go to the website of manufacturers, look at the manual and know how to limit the DHCP address field. I changed mine to limit the address 192.168.1.200 thanks 192.168.1.250 DHCP assignment. Your router can use the 10. subnet, so your address may be different, depends on the manufacturer of the router, or if you use a DHCP, the scope with the DHCP server. Gives me 50 IP addresses for all the guests who may want to use wired or wireless connections and should be more than enough. This allows me to attributed to the 192.168.1.1 through 192.168.1.199 a device and not having to worry about the DHCP server, you try to use one that is applied continuously to a device (printer, switch, PC, server, virtual server, etc.).

  Once this configuration of your router, you will now need to assign a static ip address to your PC. All this is done for the network card.

  On the start menu:
  Control Panel
  Network and Internet
  Network and sharing Center
  In the right pane of network and sharing Center
  Change the settings of the card
  Double-click your network adapter
  Check the box «Détails»
  Note the following lines:
  Connection specific DNS (may or may not exist, depends on the provider)
  IPv4 subnet
  IPv4 default gateway
  IPv4 DNS servers

  Once you have written those down, you can close this box.
  You should be back at the "Local Area Connection Status" box.
  Select the option "Properties".
  Select 'Internet Protocol version 4 (TCP/IPv4)', which will be in a blue when selected.
  Now, select the option "Properties".
  "IP version 4 (TCP/IPv4) properties" box should have popped up. If so:
  Select the following text:
  "Use following IP address".
  In the IP address box, enter an IP address. Example: 192.168.1.20
  Press the tab, the subnet must fill automatically, otherwise, enter the "Subnet IPv4" value you noted in the above step. Examp, e: 255.255.255.0
  The bridge of dafult, enter the value of the above procedure. Example: 192.168.1.254

  Now switch to the next 2 boxes, DNS servers. You can have only 1 entry in DNS server of the DNS entry you noted from above.
  Enter the DNS servers that you noted above.

  If there is "Connection specific DNS" writing or entries, follow these steps (otherwise, skip the sections "Connection DNS"):
  Select the option "Advanced".
  The "Additional TCP/IP parameters" window should open
  Select the "DNS" tab

  If it has more than 1 input "Connection specific DNS", follow these steps:
  Select it "add DNS suffixes (in order):
  Select "Add..." »
  In the "suffix domain', enter the first connection specific DNS entry.
  Select the option 'Add '.
  Add all the specific DNS suffixes that you noted. You can enter one at a time.
  When the radio button finished choose "OK".

  If you have only 1 entry in "Connection specific DNS":
  Entitled "DNS suffix for this connection", enter the entry you noted above for the "specific" connection DNS
  When the radio button finished choose "OK".

  Check the "validate their output parameters.

  Select the radio button 'OK '.

  Select the radio button "close".

  You should see the "Windows Network Diagnostics' open and check for any problems. I hope that everything is fine and he says 'Troubleshooting couldn't identify the problem' and choose 'Close the Troubleshooter'.
  Close additional boxes or pop-ups that are open and check and make the connection sure allis. If not, go back and check all the steps. the most common are the IP addresses and gateways.

  Good luck. After back if it solves the problem.

• just installed a last set of updates to security for vista, but now my Internet connection disappeared.

  Hi, I recently installed a series of updates to security for vista sp2 final, but now I've lost my Internet connection...
  I can get into safe mode with network and get on this path ok but obviously not ideal.
  I can see the latest patches from the Control Panel, etc., but when I want to uninstall the latest series does not appear. Anyone know how I can uninstall these and again one by one to find the culprit.
  Pulling my hair so any help greatly appreciated.

  Borrowed from Try3

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I hope this helps.

• Anyone else experiencing the random loss of internet connection while using character animator?

  I seem to have a random loss of internet connection when performing character animator.

  Look into this further. It seems not related to the animation of character since today, it seems to happen randomly when running a simple browser. I think that maybe it's just my old router is about to die. I deleted my DNS cache and renewed my IP address and reset my router, so I hope that's all it took. Otherwise, it may be time for a new router.

• Last update of Windows 8 caused the interruption with internet connection

  I couldn't connect to the internet after the update. I finally had to go back in time and get rid of the update. Now my internet connection is fine. However, who am I without the update next? Does anyone else have this problem?

  Hello

   
  Please help me with the following information:
   
  1. what type of internet connection you have?

  2. What is the brand and model of the computer?

  3. do you get an error message, if yes, what is the exact error message when you lose the Internet connection?

  4. What is the number of KB updates that are installed?

  As you say, when go you back to the previous point system to remove the update Windows Internet connection works fine. lets check what update is causing the problem.

  I suggest you to install the updates of windows one by one and check the update the Internet connection problem occurs.

  Please enter the number of this update and let us know.

  Windows Update: Frequently asked Questions reference (how can I find out what were the updates installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Additional information:

  You can see the complete procedure in the article below and check if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps, please respond with the requested information and the State of the question for any other help.

• Start up hangs before login in screen after the Windows updated 10/26/2010

  Before going to bed, I decided to install all Windows Update after they have been downloaded (don't know what they are).  I do not download anything at night or for the past weeks.

  Yesterday, I went to turn on my laptop and it could be block/gel just before the log on screen and after departure upward. My pointer doesn't move or anything.  Graphics seem to have stopped and remained black with only the pointer that appears.

  I decided to do a reboot to safemode (all 3) and it hangs at ahcix64.sys.  I also tried a recovery back to a month ago and it would be dismissed. (don't remember error number, but will update when I'm back on what it was).

  I tried to use KNOPPIX to get all my fails, and which also failed during startup.  I would rather a restore of the entire system.  Please let me know if this happens to you.

  MODEL:

  HP TOUCHSMART TX2-1270US

  RAM 4 GB

  AMD TURION X 2

  WINDOWS 7 HOME PREMIUM X 64

  Hello
   
   
  1. How do you do the system restore on your computer?
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
   
  Method 2.
  a. place the Windows 7 installation DVD into the DVD drive and restart the computer.
  b. start from the DVD in the System Recovery Options screen by pressing the F8 key.
  c. Select command prompt.
  d. in the type invites the next and press to enter.
  CHKDSK C: /f
  Note: In the command above C refers to the hard disk partition. You can run check disk on all partitions.
  e. once the chksdk is complete, exit the command prompt and restart the computer and check.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows blue screen after windows update FEB 10 2010 (stop: 0 x 00000050)

  After updating vista 32-bit with a major update and updates security 4-5 and 1 optional update, my system cannot load. I tried all the mods that are associated with the key f8 (as safe mod ect), then I tried to recover Vista disc, and then the repair system and still no-go. I've heard a chance to eliminate these additions with a command promp (for example using the Vista recovery disc) on an xp system. Unfortunately I have 32-bit vista, so the command prompt will be different slicely. My original Os cd can only perform format c: install and preserve old files or loading drivers (which I did not), so I downloaded and burned the vista recovery disk. I can't tell you my system specs because I can't make a dxdiag because I can't before the vista loading screen. From what I remember, I have a pentium quad core 2.4, 4 gig dual channel ram (I checked the memory diagnostics and is ok), gm-33 mother card, NVIDIA 250 gts grafic, power supply chieftec 550 w.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• HP compaq dc5100 sff: loss of internet connection on desktop after installing windows 10

  Update from windows 7 to windows 10 and I lost my internet connection. My connection is good, the son, all good router. Windows 10 seems to work great except no internet. She said "not connected-no connections are available. So is it not reconizing him actions card built in the Board of directors or what. I tried to reload the drivers. I can use any help I can get. I have a hp compaq dc5100 sff with 3 GHz, computer of office 2 GB of ram. I've updated my laptop and it works fine. If I can't understand, I guess I'll go back to windows 7. Ideals, let me know...

  Ok.

  The only suggestion I can offer would be to install the latest driver ethernet directly from BCM and see if it works.

  I think you need the first driver on the list for 32 bit.

  http://www.Broadcom.com/support/?GID=9

  You will need to manually install the driver for the adapter ethernet BCM in the Device Manager, as the file contains only the driver files and no setup.exe file.