Preserving the image when resizing

Similar Questions

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• Quality of the image after resizing

  Is it possible to resize images without loss of quality. I currently use SnagIt to capture the images and resize it. I have then insert the jpg file in Robohelp 10 and produce documents printed in Word.

  Try to use the PNG rather than JPG format. SnagIt is as good as it gets with the resizing. It also depends what you resize and how that was produced, where you have no control. Also, there is a point beyond which no resizing will lose clarity.

  Other tricks are not so scale but use Snagits Cut Out options to lose part of what you capture. For example, some screens may have lots of white space which can be cut rather then to resize the image.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• CS6: How to display the contents of the image when moving/resizing

  CS6 Indesign, Windows 7 64 bit

  Hi all

  I am a tech IT tries to help one of my users, so I'm not proficient in Indesign by any means. That being said, I was wondering if there is a way to display the content of a picture by dragging or resizing the image?

  Thanks, Shaun

  Edit/Preferences/Interface/Live screen drawing/immediate is or to drag click, hold for a moment, and then drag.

• Text the PIN in the center of the image when using fluid width

  Dear fellow users Adobe Muse,

  I have a some problems pasting blocks of text for the picture frames when you use layout fluid width.

  What I want is to have three images side by side and a text centered on each photo.

  When my browser window resizing pictures fit perfectly, but the text does not follow.

  I tried to classify, but it does not help.

  
  

  Is it possible to lock text block so that it is always at the center of an image?

  
  

  See the images under (the first showing what I'm after and the other showing what it looks like when resizing)

  

  

  Try the workaround mentioned in this post: Re: text on reactive image?

  Best,

  Anna

• Do the images to resize automatically in a responsive design

  I'm working on a help file for a product, and I have a lot of images of the user interface.

  I would like to see them down automatically resize when the user who viewed the topic made on a platform of Office No. As is the case, the images just stick on the side, forcing users to scroll to the right to see all that.

  Try to convert one in png.

• Loss of the size of the image when exporting .tif

  I have a series of .tif images that have original dimensions of ~ 4700 x 4700. However, when I open them in illustrator, they invariably under ~ 1750 x 1750. TIF, even if no changes have been made. How to preserve the size of the image?

  Lol Illustrator will always respect the resolution setting. You will need to put the image in Illustrator, if you want to keep the resolution.

• not the same size of the image when I import it

  I want to import an e imagexactly the same size he is, but I can't do...

  someone at - it an idea? Thank you.

  I'm using flash pro cs5.

  Hi Jakob,

  Try this first-

  (1) Insert the following code into a new document and check the system screenDPI:

  import flash.system.Capabilities;

  trace ("Capabilities.screenDPI:" + Capabilities.screenDPI);

  (2) If for example, the output is 72 dpi, when you import an image, it seems that Flash is resized to match what he thinks it's the resolution of the screen and in this case, its 72 dpi. So if the image has a higher resolution, he dimensionnera it down.

  You can try the following-

  Create an image in Photoshop with say 300 dpi. Create a new one with a 72 dpi. Import both of them in Flash. The first image will be scaled down, but the second image retains its original size.

  The solution is to make sure the graphic that you import is 72 dpi resolution.

  You can use an image editor like IrfanView to check or adjust the DPI of the image that you use.

  Let me know if it helps.

  Thank you and best regards,

  Roger Simon

  Adobe Flash Professional Team.

• What DPI and the quality when resizing the photos to post-secondary studies for use in PRE?

  For use in first 7 Elements:

  When resizing my photos from digital camera in Photoshop for reduced 1000 x 750 sizes that you would recommend when panning and zoom, there are a few additional choices.

  Asked for the resolution in dpi.  Wouldn't be 600, 300, or less?

  The other thing is: convert files? The max quality JPEG or standard or what?

  I'm still a beginner at the first, then feel free to too technical!

  Thank you, Elizabeth.

  Well, my book has all the answers, if you are interested, Elisabet!

  PSD files are Photoshop files. Unlike most file formats, PSDs save their image data in an editable form, including layers and text. It also records these image lossless data - so that the files can be quite large.

  JPEG files were invented mainly for use on the internet, and their main advantage is their image data can be compressed, so that the file sizes are much smaller. (That's why your digital camera probably stores its photos in format JPEG.) But the compression does not come without a cost. If you reopen and re - save a JPEG file multiple times, you will begin finally to compromise the integrity of the image.

  With the photos that you want to use in a Premiere Elements, a JPEG file is probably fine. Quality is a good setting, and it's anything on a 7. (Probably you can compress your files even more, if you do not plan to re - open and re-save the file, but you probably don't have your file who are weak, unless you use online).

• Hide the image when sending as an attachment in Windows Mail

  When sending an attachment in Windows Mail images, the image appears on the body of the email. How can he be hidden?

  Hi Agent CU v-13doza

   

  To prevent the display of Windows Mail attached pictures in the message, you can follow the steps mentioned below and check:

  a. ensure that Windows Mail does not work.

  b. press Windows + R.

  c. Type "regedit" (without the quotes). Click OK.

  d. for Windows Mail:

  Go in HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  e. Select Edition | New | DWORD (32-bit) value in the menu.

  f. Type "Automatically Inline Images" (again without the quotes).

  g. press ENTER.

  h. check the column data of automatically Images Inline said 0x00000000 (0)

  ·          If it isn't, or if you already have a key automatically Images online.

  ·          Double-click on automatically Images online.

  ·          Type '0' (not including the quotes) in value data: and

  ·          Click on OK.

  i. close the registry editor.

  j. start Windows Mail and check.

   

  I hope this helps.

• I do not see the image when I layer 2 images

  I try to layer 2 in PS JPEG files and tried to open the 2 files and copy / paste it and also tried to drag and drop.  A new layer is created, but I do not see the image so that I can resize.  Went through all the tutorials and answers to similar questions but no luck.  Tired - I'm sure this must be a very simple thing to do.  Thank you.

  I figured well tones to be involved, but with a jpg that wouldn't be a problem anyway.

  What did you do for troubleshooting so far?

  Restoration of preferences after checking all the presets custom like stocks, models, brushes etc. have been saved can be a good starting point:

  https://helpx.Adobe.com/Photoshop/KB/basic-trouble-shooting-steps.html

• I have a problem with the cloning tool, when I retusch to digital photos. When I hover over the image with the cloning tool it slightly changes the picture and ruin. -What someone knows how to configure the tool so it doesn't ruin the image when moving be

  Hi there I do retusch on digitized images and when I move the tool between the dust spots cloning it changes the image slightly. Just noticed and got a wedge after working for several days.

  -Does anyone know how to put the cloning tool to avoid this chang during the movement of the tool on the image?

  Very grateful for an answer

  Anders

  It is possible that your Source region is quite different from the target area that the Clone tool is not the most effective use.

  Another reason is that you have put a sample of Clone of hard edge.

  I suggest you use the Spot Healing Brush tool to remove dust spots and see if that solves the problem.

• cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

  Imported a Fuji raw image in Ps 2015 CCfrom Lr 6. The cursor is in the detail view does not point to the same place in the image. There is a lag of about 0.25 inch, regarding the image of the screen

  There was a problem with that in Camera Raw, but I'm not sure LR & PS. It happened on Windows, when the size of the default text for the operating system was not set to 100%. I thought that this problem has been fixed in the latest updates of ACR.