Loss of whem audio hdmi is plugged

Similar Questions

• Laptop HP Pavilion 15 t W0P57AV: Audio HDMI problem

  I have a new laptop that I just got ordered directly through the HP site. I plug the HDMI cable and plug the cable on my TV and I get no sound on my TV. I already have a click with the button straight on the volume icon and selected playback devices and there is no device audio high definiion listed. I also have a click right and select Show Disabled/switches and nothing appears.

  How is it possible to have a new laptop with no Audio HDMI capabilies? Help, please. I tried to figure this out for days.

  Hello:

  See if reinstalling the Intel HD audio driver and restart the PC solves the problem.

  The graphic driver install the HDMI audio driver.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76613.exe

• Laptop HP TouchSmart 15: Audio HDMI notworking

  Hi team,

  After the upgrade to 1604 10 update Audio HDMI windows does not work in my PC laptop HP TouchSmart 15,

  non - model E6F34PA #AB4

  I tried almost all possiblties Google serach.

  1 put updated driver from compmgmt.msc

  2 re-ntsall IDT Audio driver of Intel

  2. use of the easy software I have updated all drivers.

  but it still shows no Audio HDMI sound source.

  

  When to check event under driver, I found the message below.

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000\4 & 2ffee478 & 0 & 0001 requires installation.

  

  could you please help on this issue.

  Thank you

  Riou

  Hello:

  Here's what you need to do to get the HDMI audio to work...

  Download and save, but are not run this graphics Intel W8.1 driver.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Download and install this free utility for files.  The 2nd file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, right-click on the file of the Intel graphics driver that you downloaded.

  Select 7 - Zip from the list of items.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp63750).

  After 7-zip created the driver folder, go to the Device Manager and click on the Audio device high definition with the! Select this option.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the Intel HDMI driver should install.

  Then restart the PC, and you should have video and audio plays from the HDMI port output.

• Acer E5 problem audio hdmi 571G

  Please tell me why when I connect to a TV with an HDMI cable, I have the video signal, but not his!

  I have the latest driver update(video,audio,all)!

  In (audio) playback devices, Digital Audio (HDMI) (not connected) gray apear and I can ' t change anything! "

  The cable is good because works(video+audio) with another laptop and even TV!

  Help, please! I'm updating the bios, installing and reinstalling drivers... nothing works...

  the last things to try, if you haven't tried to alread:

  Uninstall the Intel drivers and check if the HDMI reading is always there and check if it works

  Uninstall the nvidia drivers and check if the HDMI reading is always there and check if it works

  She has some problem of drivers, but without the cell phone in the hands, it is very difficult to restrict the question.

• Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

  Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).

  My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.

  I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!

  Any help?

  Thank you very much!

  This isn't the audio chipset of this system, which I listed above.

  The audio chipset to send the data in 5.1 surround.  The HDMI port would support, if it was sent.

  It is not sent in this way, I listed above.

• No audio HDMI with Windows 7 Ultimate

  Since the departure of Vista with Windows 7 Ultimate, I lost audio HDMI.  I can connect video successfully to my Sony KDL46VL150 but will not come out through the home theater system.  It comes via the laptop.  I tried to update the drivers, but clearly, I have not found the right pair.  I tried as well through the website of HP, and Intel.

  The audio drivers in the system are now:

  Stwrt64.sys IDT High Definition Audio CODEC Version 6.10.6276.0

  Intel(r) High Definition Audio HDMI IntcHdmi.sys Version 6.10.0.2056

  I suspect that the HDMI driver is not 64-bit.

  Any other suggestions?

  Thanks for the tips.  I downloaded the drivers and the saved on the desktop as you suggested.  However, I could not find the graphics driver as you have described.

  I also followed the following suggestion I had to re-boot with the HDMI cable connected to the TV and it worked.  I see now that I have 2 identical drivers (Mobile Intel 4 Series Express Chipset Family) loaded in graphics cards.

  In any case, the problem is resolved.

  Thank you very much.

• Media Center Audio HDMI works partially

  Under Windows 7 Ultimate on a HP laptop. The HDMI port on the laptop is connected to my HDTV 1080 p. The sound works fine through HDMI when I navigate the menus. All sounds click and selection in Media Center out of the TV and they sound wonderful: rich, deep tones. The sound does NOT come through the speakers of the laptop. It clearly comes through the cable HDMI and HDTV.

  (Sorry to be so redundant here sounds but I needed to make it clear that HDMI audio through the TV works somehow.)

  However, when I play recorded TV or live TV via Media Center, it is without audio at all. When I run the audio Setup Wizard in Media Center, I get the same result. I hear all the button press tones when executing step by step through the wizard, but the actual trial play without audio through the HDTV. I did the audio HDMI by default in Control Panel, but it does not help.

  I got exactly the problem you described.  All the sound elements worked perfectly except for the live TV or record tv.  I tried all combinations of options that I could, I finally found this site with a slightly different question, but the settings got my audio work for the tv.
   http://www.gilsmethod.com/how-to-enable-HDMI-audio-using-your-HP-Pavilion-Media-Center-PC
  Goto Control Panel / hardware and sound / manage audio devices
  Make sure Realtek Digital Output Audio is the only one his device enabled
  Update highlight digital audio output, and select Properties
  Then select Supported Formats tab
  Deselect formats all encoded; so no encoded formats should be checked in this section (Note: If you do not select a format and then hit test you won't notice any noise is heard during the test)
  Make sure that only 48.0 khz is selected in the section of sampling rate
  Apply the settings
  Return to the Media center and sound should work for live TV

• No audio HDMI via HDMI to SONY LED TV connection

  When I connect an HDMI cable to my SONY LED TV it shows no audio HDMI to TV, only the image (what ever on pc), but the audio is coming from speakers to computer.

  Hi Umesh,

  Follow the steps below to see if the problem can be solved.

  1. right click on the volume icon in the system tray, click playback devices.

  2. right click on the empty space of the playback window, click on "Show disabled devices" and "show disconnected devices".

  3. check if HDMI is listed, if so, set as the default value.

  For more information:

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  We know if you need help. We will be happy to help you.

• AMD high definition Audio Device not Plugged In (HP Pavilion dv6-6b09sa)

  I just started my laptop HP Pavilion dv6-6b09sa (running on Windows 7) to find that the sound icon is a red cross next to him and he claims that "no speakers or headphones are connected. In Control Panel, it says that the AMD high definition Audio Device is not plugged in.

  As far as I know, I did nothing to cause this.

  I have already tried:

  Restore the system to yesterday at 22:00.

  Instalation of a TDI driver on the HP website, but I don't know how to disable/change/remove the old driver. I am completely ignorant of these things.

  Please help, I am at a total loss.

  Hello

  You are welcome

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54400.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• HP Jet 11 R00: No audio - HDMI to TV - HP Stream R00 11

  Hi, I recently bought a HP flow 11 R00 with Windows 10 laptop. When I plug in my HDMI cable to the TV, there is visual only, no audio. When I make the devices, I'm not able to locate or add my tv and I tried install Intel Graphics Driver from the site, but get the following error message: "this computer does not meet the minimum requirements for installing this software. Any suggestions please? Thanks in advance, Ruthie

  Hi Paul,.

  Thank you for your response.

  I followed your instructions and confirmed the Realtek HD Audio is present, but Intel is not.

  Could you please tell which driver I should try to download?

  My complete product id: 7TU HPStream 11 - R00.

  Kind regards

  Ruthie

• Audio HDMI only

  I got a new Dell Studio laptop. It has an HDMI output, which does not recognize that it is plugged into an Ampliphier. I guess it'll work out fine when it is plugged into a TV, but I need only the audio to work. I went to my sound settings and it says device not connected hdmi (but it is). Help, please

  Note: This works when it is connected to an LCD tv, but I don't have one, still.

  Gddiva,

  How it works when connected to an LCD, this would exclude Windows problems. By this I assume you have some sort of hardware / cable problem. I would like to follow up with Dell. I could also check and see if the devices HDMI ALL work when plugged into your amplipher.

  Thank you

  Shawn

• my audio hdmi does not model connect to television. I did not underreporting all not more... because it lets

  Here's the thing...

  1 when I bought the hdmi cable I just plugged on ports on my computer, television and he worked, video and audio... didn't have to configure anything at all.
  2. I unplugged the HDMI from my comp port and plugged into my xbox and the test of the xbox to my tv HDMI... everything worked PERFECTLY.
  3. then I decided that I wanted to keep my laptop connected to my tv, so I plugged the hdmi to the TV.
  4. now, I CAN GET VIDEO on my tv from my laptop, but NO AUDIO.

  I don't understand what I've done or what could have changed since when I got my hdmi in my computer and tv the first time compared to now when I have it plugged in?

  Ive disappeared and looked through forums on different sites... no help at all. tried to go in my control panel > hardware and audio > sound > reading is what general advice seems to be on these different forums... hdmi will not come up to set as default for the sound device, only my speakers in my computer is detected. and I really don't understand why this would be the case, because my hdmi cable is connected of course a little because the video works and not audio... I really don't get it at all... Please someone give me some advice, I would be very happy. Thank you very much!

  FOR INFO:
  my laptop is a Toshiba with Windows 7 on it

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  Let us know.

• How to use HDMI and plug headphones at the same time?

  I'm running to a HDMI projector (via a HDMI-DVI adapter) for video and Composite (red & white RCA) using the socket for headphones and a splitter cable to a receiver of older Theater-in-a-box type for audio. But when I plug the HDMI, the headset turns off - no sound. I've seen people describe the ways to solve this problem for older versions of Windows, but I have Windows 8 and I'm unable to find. Thank you

  Michel,

  Apparently, it is not possible to output sound via the HDMI and the headphone jack at the same time.  But if you want to watch the video via HDMI and listen via the headset follow these steps:
  Right click on the speaker icon in the task bar > left, click playback devices > right-click on HDMI > disable.
  It works for me.
  Rusty

• 13 d-0016nl envy: Problemi con audio HDMI

  Buonasera,

  By some problemi ad one Migliore programma sono stata 'costretta' a reinstallare windows 10. It computer e stato con well stessa versione di windows che ho later reinstallato sopra. Prima della non aveva nessun problema mentre ora HDMI audio reinstallazione, al contrario del video che funziona correctly, the audio if feel directly dal portable Reed is is con cavo HDMI al television set.

  Ho tried ad abilitare uscita HDMI da 'dispositivi di riproduzione' my device come to it cavo ditch no attaccato.

  Ho anche a tried ripristinare I driver audio e later a dal sito HP gli News download my non cambia absolutely nulla.

  You can help? It computer virtually nuovo e e wants to succeed a risolvere questo problema senza dover resorting a thousand by anche una collegare cavi cassa con portable the solo pole HDMI no basta.

  Grazie in pre-empted.

  Martina.

  @Martina31

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• 52 "Regza TV Audio - HDMI-output optical audio problem does not

  Hello

  friend of mine has a Regza 52 "LCD TV.
  She's trying to connect its apple TV & Optus Fetch device (cable TV) on the HDMI inputs and then having the audio outpot of optical fiber audio outpot to his BOSE amplifier.

  My understanding is that when you select an HDMI input, then the video and audio must be addressed.
  So you should see the video on the HDMI channel and need to hear the sound.

  What is happening is that she sees the video selected on the HDMI channel, but not audio, the sound heard is actually free in the atmosphere of television station that had been retained.

  We tried all the TV menu options successfully.

  How do we get the optical audio output to be on the instructions of the HDMI input?

  Thanks for the help
  Peter

  Hi Peter

  All this should not be so complicated. Using an HDMI cable, you can transmit video and audio to external device to TV signals. For example, if you use the HDMI 1 port and turn on the V you should see the picture and hear the sound of the TV.

  For audio, you can use an external device like Hi-Fi receiver or this BOSE amplifier. Using the optical audio output of fiber on your TV, you should hear the TV sound look no matter what external device is the source or which channel you. What you see on the TV the sound comes through this amplifier.

  I have this BOSE unit, but all I know is that when you want to hear his amplifier the right port or channel must be enabled there.

  I use my Toshiba TV connected to the Yamaha V537 amplifier with optical cable and it is listed under AV4 port. So when I want to hear the sound on my Yamaha I need to enable port AV4 on it and its is here.
  Some additional settings on the TV are not necessary. Optical output on the TV is always on (see the red light on the inside).

  Check this please on BOSE amplifier.