Computer HP laptop is not picking up good wireless signal after downgrading windows 8.1 for windows 7

Similar Questions

• Hi I have my computer will not pick up my wireless signal, but it captures others, in small residence also other devices pick up thanks for link wrong signal strong whats for your help

  Hello

  my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even block
  Thanks for your help

  Hello edwardmurray21,

  Thank you for the question!

  It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. which browser is installed on the computer?

  3. What is the brand and model of the router?

  Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Equium M70 will not pick up my wireless network

  Hello

  I have a Satellite M70-173. Laptop will not pick up my wireless network even though it shows on the other networks nearby.
  I tried to update the list of networks, I deleted the network and added it again but still no joy. This worked OK until all
  A week ago when we had a problem with the router. We had to change to a higher channel. Could be the problem?
  I'll try a lower channel. I'll let you know if that helps.

  I have two laptops in the House and they pick up without any problem.

  Any help would be appreciated.

  Post edited by: TiaMaria

  Stand by. If your laptop can see your WLAN or not or you just problem to connect?

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• I have works suite 2005-but my laptop does not read so good

  but my laptop does not read if good, Cd is in gd condition, how can I get better results when need to use it?

  Clean the cd with water / use it on another machine to test his condition. Try a different brand cd to test the drive.

• When you type an e-mail on my computer dell laptop with Vista system interprets constantly my typing as a variety of commands for example find, cancel, etc. cut.

  When you type an e-mail on my computer dell laptop with Vista system interprets constantly my typing as a variety of commands for example find, cancel, etc. cut.

  Hi stuart-vm,.

  I looked at the Dell website for the resolution of the problems of touchpad.
  Look at the troubleshooting here.
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_0

  This is information from Dell:
  Press the NumLock key on your Dell laptop
  In order to have the features of a 101 keyboard keys on a laptop key 85, the NumLock key active keyboard 10 key functions that would be normally resident on the right side of a standard keyboard. Simply press again to return to normal operation

  I don't know if it will help your problem.

  There is a link to the Dell Diagnostics to see if there is a hardware problem:
  http://search.Dell.com/results.aspx?s=DHS&c=us&l=en&CS=19&k=hardware+diagnostics&cat=SUP

  You can post in the Dell Community listed below if the advice above does not help.
  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Thank you

  Marilyn

• My laptop does not recognize my modem wireless of suddenlink cable/wireless.

  My laptop dose not recinise my modem wireless of suddenlink cable/wireless, I had to format my hard drive and I lost the info. for the wireless modem, I tried the KeyCode and it will not reconise the code.

  Hi Richard,

  What is the number and the model of wireless modem?

  You can get in touch with your ISP (Suddenlink) provider for further assistance on this issue.

  SuddenLink Support

• My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?

  Hi Hn_668,

  See the articles below and check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Computer HP laptop do not recognize the storage of my slate

  Hello

  A few days back one I plugged my slate 7 on my laptop and the storege internal and sd card appear as usual on windows files.  But not the second time. The laptop recognize the 7 slate but it appears as empty and I do not see the storage disk, in fact, I see nothing, just the icon slate on the left side, but when I click on the icon of the slate is ordered.

  Any ideas?  What CASN do see the internal storage and sd card on my laptop again?

  Hello luismonroy, welcome to the HP support community!

  When you are finished with the Slate7 the last time, "eject" the device before unplugging?  Always a good idea.

  I've seen some behavior laminated using my Slate7 and Vista64 laptop.  Tried to switch the setting of the PSG on the Slate7 for 'camera (PTP)', then back for PSG and all stood - main memory and SD card that I had inserted.  This can be found here on the Slate7:

  Storage/settings / < Menu icon, upper right corner > / USB connection

  WyreNut

• Computer Pavilion laptop will not turn on black screen

  Hello

  I just turned on my computer laptop pavilion dv6 (almost three years), and it does not start. Instead, I got a blackscreen.

  The capital block and the keypad lights turn on and off all the time, but I can't do anything. I can't enter the bios, the recovery or anything like that. My computer just seems to be in limbo, and I can only turn it off by pressing the power button.

  I have windows 7.

  Thank you very much for your support

  Hello cristiaan4,

  Welcome to the HP Forums! I hope you enjoy your stay.

  I understand your computer screen is blank and there are LED turn signals. I will do my best to help you, and I apologize for the delay.

  To fix this, I encourage you to please try the steps outlined in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

  This document you will help idenfying the source of the problem and can suggest many corrections. I believe that the problem can be solved by trying these steps. If this is not the case, the computer doesn't have a hardware problem. To remedy, please contact HP telephone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  I hope this information helps you. Please let me know your results. Thanks for posting on the HP Forums. Have a great day!

  Mario

• Computer Toshiba laptop does not work after the lid slam... Help please!

  This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

  In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

  As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

  Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

  Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

• my computer dell laptop will not play a dvd or cd... when I open windows media player, nothing happens

  When I put a cd or dvd in my computer dell laptop with windows 7... nothing happens... and when I open windows media player does nothing... no error message... nothing appears on the screen... It is as if the program does not exist yet... when I try the resolution of problems and he doesn't find anything wrong... can someone help me

  When I put a cd or dvd in my computer dell laptop with windows 7... nothing happens... and when I open windows media player does nothing... no error message... nothing appears on the screen... It is as if the program does not exist yet... when I try the resolution of problems and he doesn't find anything wrong... can someone help me

  ===================================
  If you insert the DVD in your DVD drive and go to...
  Start / computer... and on the left, click on the drive letter
  the DVD player is in... He launched the DVD?

  Maybe your AutoPlay settings must be changed:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

  Still without success:

  Take a look at the following article:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• Computer HP laptop will not connect to wrt610n

  Hi all just a quick question, I just bought the wrt610n and made the new frimware update him. My xbox360, girls I have mac HP printer wireless netgear wireless printserver find all the router and connect using wep very well. my HP with brodcom a.b.g./bluetooth wireless card will find the router but when I try to connect to the network in a box just telling me that I need to go into the details to join this network. I click on it and a box comes in asking for username, password, and domain. I have not configured this I have the network key and thought at first, that's what he was going to ask me to but no.

  To check to see it that would work the wireless I have cut the WEP key and it is connected to the network very well. a unit of games on the laptop to connect to my 10.100.1000 and it connected to her fine any ideas

  Thank you

  Mark

  Your HP laptop to work with WEP security on your router, you must create a profile on your HP laptop to your wireless network. As on your HP laptop IEEE of authentication is turned on, which is why its asking you additional connection information. Follow the steps to add a profile on your HP laptop wireless.

  This settings are for Windows Vista:

  Click Start - Control Panel - Network Center and sharing - on Sid left Click on 'Manage Wireless Network' - click on Add - then click Manully Create a network profile - typed the name of your network - security or password Type your security key - click Next - and click on "Connect To" and once you are able to see your network connected to your wireless network , Close all windows an try to go online.

  This settings for Windows XP:

  Click Start - Control Panel - card WIRELESS - make a right click on the "Wireless network connection" icon and click on properties - next to the general tab, click "Wireless network" tab and under "Preferred networks" - click on the Add button - name of sub network - Type the name of your wireless network - and under authentication of network Open, under Date of WEP encryption select - below you must uncheck "the key is provided for me automatically" and under network key and the type of key network confirm your security key and click Ok and click Ok. Once done Click right on your wireless network connection icon and click on view available wireless network - select your network and click on Connect.

  After that, you will be connected to your network and check if you are online.

• Compaq CQ58 computer 301SA laptop does not connect to 50Ghz band on router

  My laptop does not connect to the band 50Ghz on my router dual-band. I know that my router Netgear dual band diffuse 24 and 50 Ghz, but the laptop only shows the 24 Ghz band depending on availability.

  I have a Compaq CQ58 301SA Notebook PC, Windows 8 (64 bit OS).  It has a Ralink RT5390R 802 11bgn network adapter and a Realtek ethernet network adapter. I use the laptop wireless, for example using the Ralink connection and it connects easily to the 24 GHz band, but I want to broadcast TV programs and movies smoothly, for which, I understand that the 50Ghz band is preferable. I pay my ISP (Virgin Media) for a connection to Super-fast broadband but my laptop seems to be limited to the 24 GHz band. Seems to be the case if I work with the adapter Ralink wireless or wired with Realtek ethernet connection.

  This problem can be corrected? If so, how? What I have done research on the web, the problem seems to be network adapters. Can they work on the 50Ghz band? Or do I need to download another adapter (if so, which?) Or use an adapter external network I plug into a USB port?

  Driving me crazy...

  Hello:

  The Ralink RT5390R 802 11bgn is a map of the only band (2.4 GHz) only.

  Whenever you see a labeled bgn wireless card, it is a single band card.

  Cards labeled dual band abgn or agn.

  The maintenance manual (Chapter 3, page 19) does not indicate that any internal dual band card is supported, so you would probably have to go with an external usb dual wireless adapter.

  http://h10032.www1.HP.com/CTG/manual/c03593268.PDF