LRT224 ADSL ISSUES

Similar Questions

• ADSL modem disconnects when I connect another USB device

  I access internet through an ADSL USB modem. If I'm connected to the internet and plug an another USB device, such as the docking station for my PPC or printer, the internet connection drops and I get an error indicating that the modem or another connection device can be used by another application, or there is an error and it takes several minutes and usually a couple of "made up" to get internet.

  Is this a problem with the management of USB or is this normal? All devices are plug n play and installed before this error. Usually, I connect the modem to the back and other equipment on the side.

  Hello

  It really looks like a USB power management issue.
  I found this very similar topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17783&MessageID=65434

  Turning off power safe mode solves this problem.

• RRAS issues! -Unable to connect to the VPN users,

  original title: RRAS issues!

  Hi all, I have some real issues with my RRAS VPN. All of a sudden the users are randomly cannot connect to the VPN. Making mistakes like 619 800 and so on. I activated the GRE (once the problem starts) checked to see if the 1723 port is open. Why is this happening now?

  I use DynDns host name and everything seems fine, fact that there are enough ports available to PPTP on the RRAS.

  I am running Windows 2003 SBS SP2

  Router is a MAKO 6861 with a normal ADSL line

  I see this in the PPP.log:

  [8128] 06-04 10:27:27:794: Recv timeout event received for portid = 288, Id = 5, Protocol c021, fAuth = 0 =
  [8128] 06-04 10:27:27:794:
  [8128] 06-04 10:27:27:794:
  [8128] 10:27:27:794:
  [8128] 10:27:27:794: <06 57="" eb="" 0d="" 3e="" 07="" 02="" 08="" 02="" 0d="" 03="" 06="" 11="" 04="" 06="" 4e="" |.w..="">... N |
  [8128] 10:27:27:794:<13 17="" 01="" b0="" 09="" a5="" e1="" 15="" e6="" 49="" 4f="" 85="" fb="" 7c="" a0="" 15="">
  [8128] 10:27:27:794:

  And some of this:

  [8128] 06-04 10:27:43:325: line before the end event occurred on port 138
  [8128] 10:27:43:325 06-04: FsmDown event is received for Protocol c021 on port 138
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 9, Protocol is c021, EventType = 0, = 0 fAuth
  [8128] 10:27:43:325 06-04: FsmReset called Protocol c021, port = 138 =
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 3, fAuth = 0
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 7, fAuth = 0
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 2, fAuth = 0
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 1, = 0 fAuth
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 4, = 0 fAuth
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, Protocol is c029, EventType = 0, = 0 fAuth
  [8128] 06-04 10:27:43:325: LcpEnd
  [8128] 06-04 10:27:43:325: line Post event took place on the port 138
  [8128] 06-04 10:27:43:325: NotifyCaller (hPort = 138, dwMsgId = 23)
  [8128] 06-04 10:27:48:043: line-up event took place on the port 138
  [8128] 06-04 10:27:48:043: PortName: VPN3-19
  [8128] 06-04 10:27:48:043: from PPP link with IfType = 0x0, 1p1f = 0 x 0, IPXIf = 0 x 0
  [8128] 10:27:48:043 06-04: RasGetBuffer returned 58 c 2148 to SendBuf
  [8128] 10:27:48:043 06-04: FsmInit called Protocol c021, port = 138 =
  [8128] 06-04 10:27:48:043: ConfigInfo = 80260
  [8128] 06-04 10:27:48:043: available APs = 2
  [8128] 10:27:48:043 06-04: FsmReset called Protocol c021, port = 138 =

  Hello

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• LRT224 and WAP801N of TP - Link point of access - low download speed

  I just installed a LRT224 for the use of two ISP connections, one is a modem connection cable with 75 Mbit/s and the other a connection ADSL 4 Mbit/s in download. It is reserved for the failover.

  For the WLAN access point, I use a WA801N of TP-link v2 with the latest firmware.

  When I connect this access point WA801N directly to the cable modem, I get about 75 Mbps of download speed.

  What is the case, when I use a LAN cable to connect to the LRT224, which includes 75 Mbps.

  But when I connect the WA801n to one of the LRT224 LAN ports, the download speed drops to about 10 Mbps.

  The LRT224 is configured to function as a DHCP server for my LAN, all devices get their IP by DHCP to the 192.168.2.x row address. The main WAN connection is configured to use addresses 192.168.0.x, the other WAN connection to use 192.168.1.x.

  Everyone knows about similar problems using a WIFI (b/g/n) access point?

  Thanks for any help.

  Okay, I think that the question is the access point.

• LRT224 hickups: abandon the WAN connection?

  Hello

  my new LRT224 shows hickups in my regard.

  It is connected to a fiber-optic 100Mbps of my ISP connection.

  If I try to stream video, it creates every minute or so a second or two to break up the transmission.

  Obviously, this breaks my video stream.

  The newspaper of the device (see below), says 'WAN connection fell', which seems rather strange and unexpected for me.

  If I don't stream video and data binding is almost at rest, these messages of 'WAN fell' intermittent continue.

  If I take the LRT outside and connect my PC directly to the line of ISP (Yes, bad practice) I don't have these hickups, and fine video streams (to a few Mbps).

  I have updated the firmware to v1.0.1.01 but that has not made a difference.

  In fact, I have disabled the 2nd WAN port.

  "Dual WAN', the 'activate the Network Service detection' is not marked in the config. By selecting "Connection failover" or "Load balance" shows no difference (no improvement).

  No idea why the LRT report "WAN connection is dropped?

  I need urgently a solution, but the issue seems beyond my skills...

  (In the newspaper, I also see "violation of policy. I don't know why they happen: I have no rules of firewall on the LAN or WAN IP addresses...)

  Thanks for any idea!

  Jos

  He is a legend of the newspaper of the device:

  Feb 26 18:28:37 2014  System Log  WAN connection is down
  Feb 26 18:28:38 2014     System Log  WAN connection is up : 5.199.147.151/255.255.240.0 gw 5.199.144.1 on eth1
  Feb 26 18:30:51 2014     Connection Refused - Policy violation  TCP 192.168.1.106:55059->173.192.114.54:7031 on eth1
  Feb 26 18:30:58 2014     Connection Refused - Policy violation  TCP 192.168.1.108:65516->89.248.168.42:3129 on eth1
  Feb 26 18:31:33 2014     System Log  WAN connection is down
  Feb 26 18:31:34 2014     System Log  WAN connection is up : 5.199.147.151/255.255.240.0 gw 5.199.144.1 on eth1
  Feb 26 18:31:36 2014    ACCESS_RULE TCP 192.168.1.107:65516->157.55.56.153:3129 on eth0
  Feb 26 18:31:37 2014     Connection Refused - Policy violation  TCP 192.168.1.106:55159->199.9.249.46:1935 on eth1
  Feb 26 18:31:37 2014     Connection Refused - Policy violation  TCP 192.168.1.106:55158->199.9.249.46:1935 on eth1
  Feb 26 18:31:37 2014    ACCESS_RULE TCP 192.168.1.107:55158->157.55.56.153:1935 on eth0
  Feb 26 18:31:51 2014     Connection Refused - Policy violation  TCP 192.168.1.106:55059->173.192.114.54:7031 on eth1
  Feb 26 18:32:50 2014     System Log  WAN connection is down
  Feb 26 18:32:51 2014     Connection Refused - Policy violation  TCP 192.168.1.108:49527->78.235.240.121:57236 on eth1
  Feb 26 18:32:51 2014     System Log  WAN connection is up : 5.199.147.151/255.255.240.0 gw 5.199.144.1 on eth1
  Feb 26 18:33:51 2014     Connection Refused - Policy violation  TCP 192.168.1.106:55059->173.192.114.54:7031 on eth1
  Feb 26 18:33:58 2014     Connection Refused - Policy violation  TCP 192.168.1.108:49374->89.248.168.42:3129 on eth1
  Feb 26 18:34:51 2014     Connection Refused - Policy violation  TCP 192.168.1.106:55059->173.192.114.54:7031 on eth1
  Feb 26 18:34:59 2014     Connection Refused - Policy violation  TCP 192.168.1.108:49499->90.24.175.227:57402 on eth1
  Feb 26 18:39:06 2014    ACCESS_RULE TCP 192.168.1.107:49499->111.221.74.31:57402 on eth0
  Feb 26 18:39:13 2014     Connection Refused - Policy violation  TCP 192.168.1.108:49837->89.248.168.42:3129 on eth1
  Feb 26 18:39:13 2014    ACCESS_RULE TCP 192.168.1.107:49837->65.55.223.46:3129 on eth0
  Feb 26 18:39:57 2014     Connection Refused - Policy violation  TCP 192.168.1.108:49584->92.142.109.203:57209 on eth1
  Feb 26 18:42:32 2014     System Log  WAN connection is down
  Feb 26 18:42:33 2014     System Log  WAN connection is up : 5.199.147.151/255.255.240.0 gw 5.199.144.1 on eth1
  Feb 26 18:43:16 2014     System Log  WAN connection is down
  Feb 26 18:43:18 2014     System Log  WAN connection is up : 5.199.147.151/255.255.240.0 gw 5.199.144.1 on eth1
  Feb 26 18:49:53 2014     System Log  WAN connection is down
  Feb 26 18:49:54 2014     System Log  WAN connection is up : 5.199.147.151/255.255.240.0 gw 5.199.144.1 on eth1
  Feb 26 18:50:42 2014     System Log  WAN connection is down
  Feb 26 18:50:44 2014     System Log  WAN connection is up : 5.199.147.151/255.255.240.0 gw 5.199.144.1 on eth1
  

  Hello

  Thanks for your replies!  I looked in the settings and methods to verify this behavior.

  In the end, I decided that the behaviour of "drop the WAN" is not not to blame the LRT224: it seems really to be created by the ISP (the fiber modem): when I plug a small switch between the router and the modem 'abandonment WAN' messages have disappeared.  Now I 'just' convince my ISP to do something...

• EA3500 EA4500 PPPOE issue resolved

  The question:

  Usable size MTU packets drop when it is connected to an ADSL Modem in bridge with EA series router connected via PPPOE mode.

  How to identify the issue:

  The router will connect using PPPOE and displays the IP address normally in State. If you are a standard ping www.yahoo.com , it works fine. When you open www.yahoo.com into your browser, it fails. Load the ping www.yahoo.com with packet MTU sizes over 100 fail.

  What are the causes of the problem:

  The current firmware using linux pppd daemon and rp - pppoe.so PPPOE connection library. The version used is ppp - 2.4.4 according to me. Is this version or the Linksys patch files that are at the origin of the problem.

  My tests showed that when the ADSL Modem ethernet port had a different MTU 1500 load pings started to drop quickly and the site navigation Web does not. If the ADSL Modem ethernet port had a MTU of 1500 the problem does not occur.

  The Solution I used:

  Searching the Web I found how to get root SSH access to the router (not really a security risk). I also found the build tools CodeSourcery used to create the firmware.

  With the help of these tools I compiled a version different ppp - 2.4.5 of the library of demon and rp - pppoe.so of pppd. So I swapped the old version to the new version and commented a line off /etc/init.d/serivce_wan/ppp_helpers.sh

  After that, the routers worked perfectly.

  Footnotes:

  I love first of all these routers. They are really great, but this a defect has been a real problem for me and almost prevented me from using Linksys in the future.

  Now that I have a due diligence on its firmware I love him even more.

  Also parental control on the classic firmware is the best I've come across. Does the router indespenible for me and why I when through all the work to find a solution.

  Remember, that assumes that you are running the classic firmware on your EA3500\EA4500. I don't know if it works with Cloud firmware for these routers.

• Appeal iPhone issues 7 more

  I recently bought the new iPhone 7 more.  Not only am I having problems with the LTE service, bounce back between 3 G and no service I am now having problems with call connectivity.  When you try to make an outgoing call, I get an automatic response from my carrier (Verizon) "it's Verizon, we are unable to complete your call at this time, please turn off your phone and back and try again."

  It is a known issue with the iPhone 7 and Verizon. Supposed to be Apple and Verizon are seeking him. It has been a problem since the phone was released. Do a Google search or search here on the forums for a temporary solution but not a cure.  But basically to stop the LTE oice and data into data only in the settings.

• iPhone 6 more hang freeze issues

  My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.

  iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers

  Hello BennyFoo,

  Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.

  The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.

  If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.

  Thanks again and have a great rest of your day.

• Pages on issues of formatting to iCloud

  Hey everybody,

  I created a document Pages using the Pages application on my macbook pro I downloaded then to iCloud Pages so that I can access it from any computer. The issue I'm having is that I formatted some of the text to have a black background and the text to yellow color. For the life of me I can't understand how to change the background color of text on the Pages of iCloud. I beginning to think that changing the background color of text just is not possible on the platform of iCloud, but wanted to put this out there just to make sure.

  I appreciate any help or clarification on this issue.

  Thank you!

  Background (highlight) text color controls are absent in the Pages for iCloud, because it is a subset of Pages for Mac.

  This has been discussed in a previous post here, not so long ago.

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

• TVos 10 - Apple TV 4 (Wifi issues)

  My apple TV was working until it was upgraded to the new update 10 TVos great. I reset my router and modem, reset the apple tv itself and it has restarted several times, all with the same mistake of not being able to connect to the wifi network. My iPhone and computer are connected properly, get about 40mbps is normal, and the router is in the same room. Everyone knows these issues? No luck, anyone know a fix?

  have you tried to restore the appletv? Restore your Apple TV via iTunes - Apple Support

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• connectivity issues mobile iPhone 7

  I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

  everyone knows this? and everybody understand what it could be?

  I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

  OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

  Hello jpgraphx,

  Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

  If you cannot connect to a cellular network or cellular data

  See you soon!

• Backup issues after upgrade to iOS10

  Dear users of Apple,

  I updated my iphone 6 more yesterday with iOS 10. Phone works quite well. But I have my phone backup problems. I usually back up my phone with my iTunes Macbook (Via cable and sometimes on wifi). But after the update to iOS 10 it seems that I can't back up my phone more. I don't know the real cause of this problem.

  1. I am not able to save my iPhone via wifi data in iTunes. (Previously it was not the case).

  2. I tried to back up my phone using the cable also. Also, I pressed "Trust" this computer, but I get this error message. Please see below.

  Also, I allowed my computer by disconnecting iTunes and logging back there. And yet I have the same issues.

  "iTunes could not connect to the iPhone because an invalid response was received from the device."

  Does anyone know what this answer is invalid can be?

  Do I have to change the settings in my phone or iTunes?

  Help please!

  Thank you very much

  Deven

  Did install you the latest iTunes? iOS 10 requires iTunes 12.5.1.

  Get the latest version of iTunes - Apple Support

• A 2 month old iPod Touch 5th generation began to lose its charge the battery overnight.  East - the developer of a battery issue?

  A "renovated" old 2 months iPod Touch 5th generation just recently started losing its charge the battery during the night.  East - the developer of a battery issue?

  Perhaps. Where did you buy this device?