EA3500 EA4500 PPPOE issue resolved

Similar Questions

• accidentally marked issue resolved

  Hello! My question got accidentally marked as resolved. Is it possible to remove this? The issue is not yet resolved and I wouldn't repost and there twice. TIA!

  N °

  (140346)

• Yoga 2 Pro micro-HDMi issue RESOLVED

  I've had my Yoga Pro 2 for about a week now. Slow adaptation to the ins and outs of the device. Recently acquired a micro HDMi to HDMi adapter to connect the 2 Yoga to my TV. Needless to say I was a bit dismayed when I noticed that the adapter worked, but only if I tugged on the connection (toward the front of the machine). When I let go, disconnect the screen and I have no picture. This angered me a little. I read a little about other people having the same problems.

  I slept on the issue of a night and then in the morning, I decided to take things into their own hands. A caught a nail file I had laying around and shaved about the width of a thumb to the end of the micro-HDMi connector nail file. I could hardly see any difference in the cable connector. Then I tried to plug it in and voila. No problem whatsoever. Tried fishing the connector to the rear, low, high, before. Without interruption...

  I know it's a little frustrating, but I like the rubbery feel of the Yoga 2 body and was ready to do a few TWEAKS to make it work. A took about 5 minutes total. Now am happy once again...

  This gives a try if you have a problem with the connection.

  Just thought I'd share...

  lootzius

  

  You are welcome...

  I wasn't ready to give up, I really like this Y2P so far. And it was boring but if the fix is easy and even I can do it, then you know...

  See you soon...

• Inspiron 1525-1526, Touchpad, mouse, or keyboard issues resolved

  Hi all. I'm new on the dell forum. I'm here to show you how to repair inspiron 1525-1526 issues touch pad and keyboard. some of you experience the touchpad Act crazy, cursor jumping from one side of the screen to another, etc., some of you have the experience of the keyboard works sometimes, and other keyboard types that it itself, etc. now all back together. or test your touchpad before put you everything back. If you apply duct tape behind the touchpad cable. Please do! you will now also love using your laptop with no problems. Note: your keyboard should work correctly now. Touchpad problem makes the useless keyboard. because now the touchpad is fixed, your keyboard should work fine. If it isn't, please apply the same technique, place the tape at the end of the keyboard cable.

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  
  

  I hope everyone is happy and enjoying their laptops. Well apparently the touchpad cable connection coming loose over time. why many dell customers have their computers laptops repair by factory dell only to work for a few months, and then the problem comes back. in other words, the thickness of the wire shrinks over time or the latch that keeps the cable loses decision-making. but as you see a little little band solves this problem.

• 3 gmail IMAP accounts will be is no longer in contact with 38.0.1 to update, even in safe mode. Uknown issue RESOLVED. Problem gone its own. May be related to Norton

  by another author of the question, I'd be happy to go back to the previous version

  has been solved by running a scan for norton 360. of course not be allowed access to mozilla, I guess by Norton. Just ran a scan, did not change the firewall settings. Weird. But then again, I'm not a geek. Just a geek.

• Fan of Qosmio F10 issue resolved

  Download and install the latest driver (version 1.0.2.6) tv tuner. The fan is unbootable in the normal activity of windows. Also in high power profile start fan at low speed and is controlled by windows (start and stop after 15-20 sec). Fan very noisy and annoying start only after 10 to 15 minutes of watching TV or tv recorder usage and stop when the temp (I suppose that the temperature of the processor or tv multimedia card) is cold, or 15-30 s after the mediacenter is closed.

  Finally the F10 is verry very silent, and in profile of independence expanded, the fan never start (with 30 ° of temperature).
  After 8 months of disappointment for this annoying problem, I'm finally very very happy :-)))

  CARPET

  Hi mast

  Good news!

• BlackBerry Smartphones issue resolved: Z10 for DTEK50

  Solution (transfer of content app)!

  Hi all

  I recently bought a DTEK50, but cannot find a way to transfer my contacts from my Z10 on the DTEK50. Just so you know: there is no exchange, no service cloud servers, no outlook.com. just Windows 7 (64-bit) and a wifi and a USB connection. Any ideas or suggestions?

  Thank you.

  Kind regards

  admundi

  (Germany)

  Make sure that the WiFi is secure!

  Most is less secure than a Cloud Computing service.

• DBI application issue resolved

  Hi all
  
  During daily Business Intelligence execution request Set I got below error.
  
  APP-FND-01564: Error ORACLE 4068 in FDFGDF
  
  Cause: FDFGDF failed due to the ORA-04068: current state of packets rejected
  ORA-04065: not run, altered, or removed the stored procedure 'APPS. HRI_BPL_CONC_ADMIN ".
  ORA-06508: PL/SQL: called program unit is not found: 'APPS. HRI_BPL_CONC_ADMIN ".
  ORA-06512.
  
  The SQL statement being executed at the time of the error was: SELECT HRI_BPL_CONC_LOG. GET_LAST_COLLECT_TO_DATE('HRI_OPL_EVENT_CAPTURE','HRI_MB_ASGN_EVENTS_CT') FROM DUAL and was executed from the file & ERRFILE.
  
  Please guide me to solve the problem.
  
  Thank you and best regards,
  Muthu

  Hi Muthu,

  Please see these documents.

  ORA-06508: PL/SQL: could not find program unit called: "APPS. HRI_BPL_CONC_ADMIN' error event incremental HRI capture process [1069280.1 ID]
  Update assignment events process makes errs on HRI_BPL_CONC_ADMIN during an Initial load [ID 1175853.1]

  Thank you
  Hussein

• Question TIME and YEAR in HFR (issue resolved now)

  Hi all
  
  Im having a problem with one of my HFR report
  We have time and year Sun in Essbase application
  
  now the user wants to view the data of the last 13 months i, e
  Currmonth = Feb 2009 until February 2008
  hearing that I had taken the year and time to pass.
  to pass A YEAR, I had quickly for the year, and even as the neck to the rest of other 12 passes
  and for TIME to pass A, I had taken the TIME and Relative member - guest 1 10-12 in the other passes
  
  now the question is when I run the report complete shows for 2009 only.
  in fact last 2 passes (JAN, Feb) must have for 2008 instead, it's show for 2009
  
  can someone tell me how to get the right data.
  
  Sri...
  
  Published by: SSS on September 7, 2009 16:50
  
  Published by: SSS on September 9, 2009 12:19

  set up two columns [A and B]

  For a set for the year 2008 and the month is defined as a range of prompt month up to the end of December.
  In column B the year 2009 value and set the month as a range of Jan to the Prompt month.

  If the user select "Jun" at the command prompt, they will get in column a Jun by Dec for 2008, then in column B, they will get Jan Jun 2009 (i.e. 13 months)

  You can also improve with void variables if you want and you can use members POV place fast member if you wanted.

• EA3500 questions

  Hi, I bought an EA3500 to replace my WRT54G. I have setup my PPPOE WAN connection as my ISP asked, the same settings I used on my WRT54G. My local network is the default DHCP.

  Anyway, when my WAN connection is unplugged I can access the page of the router without problem. However, when I plug my WAN cable, I can view my router configuration page at all. All I get is an error message saying "gateway error". My internet does not work. He will take care of a few very privileged, such as the home page of my operator of mobile phone, but when I try to go on Youtube or my bank online, for example, I get a screen empty with "Establishing the secure connection" in the status bar of Google Chrome. It will also ping command prompt google.co.uk, but I can not access Google in my browser!

  I tried to change my IP routers to something different, but it did not work. Also disabled the firewall too.

  Anyone got any ideas as to what is happening?

  Thank you!

  Below the lines the problem and the solution to your problem.

  Re: Question EA3500 EA4500 PPPOE resolved

• EA3500 router in Bridge mode

  I will put up a second access point as at one end of the House's wireless signal is weak. I wired ethernet to the field. I have an EA3500 I'm trying to installing in bridge operation so that it acts as a WAP only. I tried this 10 times now. I have everything set up (SSID, pass phrases, channel, etc. and it works very well at that moment as a 2nd router.) As soon as I then put it in bridged mode, it becomes essentially a "router with an ethernet switch" wireless radio turn off (according to the tests with WiFi Analyzer). In addition, you can get is no longer at the admin page - and Yes, I know to use local access instead of the wifi chip. I use the new IP address of the router (I have a DHCP reservation for it on my main router). I gets to the sign in page, choose connect locally, enter the password, and he's going to 'pending' forever. Every time I do a factory reset and start over. There is no newer firmware than what this EA3500 comes with. It's obviously a serious bug with this model or a hardware problem. The documentation says that it works, and radio work fine until I turn it on in bridged mode - then they will switch off. The lack of access to the admin page (with her just enter "waiting") is also very frustrating. Each reset and return to work as a router - but I don't want two NATs on my network as my work WHAT VPN is not going to work through it.

  Anyone else tried mode on a bridged and got EA3500 it actually works? If so, how?

  Thank you!

  Jerry

  Jerrykham,

  There is a bug in the firmware that causes that when you select "obtain an IP address automatically".

  You must select "specify an IP address" and then enter the required information. Example: IP 192.168.1.2, netmask 255.255.255.0, default gateway 192.168.1.1 dns 8.8.8.8 (google public dns).

  The bug has been reported for more than a year and Linksys refuses to fix it. The bug affects EA3500, EA4500 and E4200v2 and perhaps others.

• WRT160N - V3 Xbox NAT strict issue

  Xbox 360 NAT issues resolved! (WRT160N v3).

  I followed the instructions in the link above, but also at least 20 other posts, but I always get strict NAT with a unique XBOX.  I think I tried all combinations and I can't understand why my situation is somewhat different.

  Question - when I go to the STATUS, under the 'Internet connection', "IP address" tab, I see 192.168.1.64 (internal address).  I read somewhere that in other words, there is an another NAT also beyond my router. What is the problem?

  This problem started when I replaced my (default) combination modem/DSL router by an old 2Wire-Homeportal-1000 s, with a brand new Motorola model 2210-02-1022 (modem only) of the AT & T store and combined with a WRT160N V3.

  I tried all combinations of UPnP enabled, redirection port, serial port triggering and DMZ range.  I used a DHCP reservation to affect my Xbox a static IP address and checked that works very well.  But even in the DMZ with UPnP off, I get strict NAT.

  I think I have to empty the Motorola + 160N and buy the current combo modem/router 2Wire AT & T, but I do not do that when I don't know for sure there will be more.

  Others seem to have great success get this cleared up.  Can someone shed light on why none of these techniques work for me?

  Thank you

  I want to thank you because after endless hours trying to remove the XBOX 360 strict NAT son - your advice finally put me on the right track.

  With my particular combination: AT & T DSL, modem Motorola + WRT160N-3 - Bridge mode did not work.  As soon as I put the modem in Bridge mode, the light of the Internet on the front does not to come.  Maybe, if I called AT & T I could find a way around it.  This setting seems to affect the PPOe connection to the router instead of the modem, but some PPOe setting I use (including by providing the user ID and password, etc.) brings me an Internet connection.

  What worked was in the modem settings.  There was no obvious parameter to enable/disable NAT, instead, it reads: "Let device LAN share Internet address?   Choice: "No, use the private IP address", "Yes, use the public IP address.  This is the power switch modem NAT and it must be set to Yes (default is NOT which is what created the 2nd NAT).

  Even in non bridged mode, with the removed modem NAT, the NAT router and other work now setting.  I could put the Xbox successfully in in the demilitarized zone.  The idea is, in the STATE of the router tab, you see now a public IP address instead of the internal address of the modem.

  WOW that was difficult and time consuming to get to this point!

• Windows 7 32-bit slow start of blue circle hangs on the network icon in the tray for 10 minutes, some programs don't load until the problem resolves.

  Hello world.

  It will be long and windy.

  I have a problem with my Dell XPS M1530.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. Dell touchpad, magic disc, pda.net and perhaps language bar.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. i.e. open office, cakewalk sonar.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or cervix causing the problem. found nothing.
  • has ran the command cmd, I forgot what's it called some thing/something else. It digitizes and restores the registers according to me. did not help
  • Used pc AVG scanner. then corrected all the errors found and the questions. did not help.
  • reinstalled the network drivers. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the Enigma.

  im running Windows 7 Professional 32-bit. as if lately, about 3 months ago, my laptop started to start slowly and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away like internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a little more resources e.g. cakewalk Sonar. In addition, other startup programs and services such as Dell touch pad, magic disk, PDA. NEt don't start until after the problem goes away. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  Hey Kosmosis,

  I had the same problem, and after fishing trawl through the web to find answers, this is the most reliable solution that I found. At the very least, it will help to determine where the problem is.

  (1) reboot your computer.

  (2) go to Run--> services.msc

  (3) to sort the list by status (click the heading)

  (4) see those blocked at the 'boot '? These are your incriminated objects.

  Apparently, Windows has problems initializing services, and until he solves, or give up, he can't go the rest of the startup procedure. Different people get stuck on different things. For me, it was the 'Server' service as jams it for 20 minutes or more.

  You have 2 options:

  Right click 1)--> properties and change the Startup Type to "automatic (Delayed). This requires to load later, that hopefully allows all the rest at the end of initialization so that you can use the computer first.

  (2) read the Description of the service and see if you can find whats causing it to get stuck. In my case, 'Server' rule of network discovery, file sharing and printing. I realized that I UNPLUGGED a NAS from Buffalo, who worked as a print server as well. My windows was blocked to find a printer on a network that was no longer available. Remove the printer from devices solved the problem.

  If all else fails, you can always try to disable the service. This is probably not the best reccomendation, like its there for a reason, but it might help you to troubleshoot.

• A list of questions {known, resolved} by the version of the OS?

  Hello

  More in this BB dev, it can be irritating to bash your head against something, and only after a lot of research read an excerpt in a post somewhere that 'it' is resolved in a later version of the operating system.

  Does anyone know of a list of issues resolved for each revision of the OS?

  Kind regards

  You can download and read the document 'Release Notes and known issues list' of each API.

• Windows 7 64-bit slow start of blue circle hangs on the network icon in the notification area. Some programs don't load until the problem resolves. stuck at the screen of welcome for 5-10 minutes sometimes.

  Hello world.

  It will be long and windy.

  I have a problem with my ASUS G50VT - X 5.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. adjustment of splendid colors, services, programs of control really like network connections and things like that but some i can still run.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. for example, microsoft outlook and other things.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or services is causing the problem. found nothing.
  • run the cmd command, I think that the chkdsk. It digitizes and restores the registers according to me. did not help
  • Used norton. then corrected all the errors found and the questions. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the problem.

  im running Windows 7 Professional 64-bit. as if lately, about a week ago my laptop started to start, slow down and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also sometimes on occasion I will be stuck to the homescreen for 7-10 minutes.  also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away as internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a bit more resources. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  I also looked in the event viewer and noticed these problems...
  The winlogon notification subscriber took 916 second (s) to handle the notification event (Logon).
  -

  -

  6006

  0

  3

  0

  0

  0 x 80000000000000

  56201

  Application

  Collin-PC

  -

  TermSrv

  916

  Opening of session

  02000000

  and it was lower than...
  Bucket of error, type 0

  Name of the event: ServiceHang

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: LanmanServer

  P2: srvsvc.dll

  P3: 6.1.7601.17514

  P4: 20

  P5: 2

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERBC1D.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERBC1E.tmp.HDMP

  C:\Windows\Temp\WERCBA9.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_LanmanServer_958bb07ee47f1d58779ce0fb489791f2b7187bdb_cab_0de8cef2

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 0de8cd67-d5a8-11e0-a8a7-9ab1f0009500

  Display state: 6

  and below that,.,.

  The winlogon notification subscriber takes a long time to handle the notification event (Logon).

  Hello

  1. Since when are you facing this problem?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If you have not tried the steps in the following Microsoft article, then try to clean boot and check if it helps.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Step 1:

  If the problem persists, you can create a new user account and check what is happening. To create a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope the information is useful.