LWAP autonomous conversion
Hi all
I need to convert a "AIR-LAP1242AG-E-K9" autonomous access point.
I tried these steps to convert the LWAP in stand-alone.
1 assigned IP 10.0.0.3 address to my laptop
2. place the IOS image in the cisco TFTP server "c1240-k9w7 - tar.default.
3 disabled all firewall on my laptop
4 cut the AP and pressed the reset button and started with the AP and released the button reset after 40 seconds
5 TFTP showed the attached error
Please let me know how can I convert the stand-alone LWAP. I need to do as soon as POSSIBLE.
Make sure that you PC works on your TFTP server is set to show extensions of known files. If not even after you rename the image file that the .tar extension is still there, just hidden.
Tags: Cisco Wireless
Similar Questions
-
1242 AP of Standalone LWAP mode conversion
Hello GS.
Can you please tell me how to convert 1242 autonomous access point / infrastructure mode LWAP mode.
I'm not able to intergrate with my 2100 controller.
Ap1242 details below: -.
DH_3750_SWITCH_STACK #sh cdp nei fa 3/0/21 in detail
-------------------------
Device ID: ap
Workshop / entry:
IP address: 10.120.249.3
Platform: cisco AIR-AP1242AG-E-K9, capacity: Trans-pont IGMP
Interface: FastEthernet3/0/21, ID of Port (outgoing port): FastEthernet0
Hold time: s 129
Version:
Cisco IOS software, software of C1240 (C1240-K9W7-M), Version 12.3 (8) JEA2, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Updated Wednesday 17 July 07 23:02 by CCIC
Thank you
Mirza.
Hi Mirza,
You have two options.
One, amounted to autonomous and re-return to LWAPP.
Two, the command is "disabled" because you're already using LWAPP image. Your LWAP contains two IOS images: it has the prefix "RRs" and the other is the image downloaded from the WLC. Delete this image, let the AP boot image "RRs" and run the command again.
-
Conversion light wireless AIR SAP 1602
Hi, we have many points of access AIR-SAP1602I-E-K9 who are currently working in stand-alone mode, we have now a 2504 Wireless LAN controller so is possible to convert the AIR-SAP1602I-E-K9 in light mode?
Yes you can. Make sure you have at least 7.4.100.0 version on WLC in support of the AP of 1602.
1. for the conversion of LWAP, use the recovery image. First download the rcvk9w8 software from this link.
2. then, you copy the IOS to your TFTP server to your access point.
3. the order, must be registered to the AP, is: archive download-sw/over tftp: / / /.
Check these procedure:
http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configurati...
http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://www.YouTube.com/watch?v=Fiv76UpStKI
Concerning
Remember messages useful rates
-
CISCO AIRONET1200SERIES @ DISCOVERY
I TRIED TO CONVERT CISCO LIGHTWEIGHT T AUTONOMOUS AP USING THE TFTP SERVER AND PUTTY.
IN THE PROCESS OF THE LWAP HAS CHANGED TO DISCOVERY AND NON-AUTONOMOUS.
PLEASE, WHAT COULD HAPPEN AND WHAT TO DO TO FIX THIS?
THE SEAL IS OUT OF PUTTY.
Update
When I published #show ip int br, radios that are not displayed
How to turn on the radio?
Please see in Appendix e cli commands.
Check with post below and you see the procedure
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
HTH
Rasika
Pls note all useful responses *.
-
Hi all!
I have a question. If we used a cisco aironet 3700series access point and there also a controller to manage. the question is "when the controller failure has occurred, can access us internet via AP. I think it is only since the Aironet 3700series available standalone twice and base Comptroller, first of all, we have configured with flex base controller wired mode and then can we change the configuration in stand-alone mode setting via the console when the controller fail again? Thank you all for answer promptly!
Hello
Reading your post, you have a 3700 flexconnect mode AP?
If so the data flow is not affected by failover wlc as traffic going on locally. If you centralized since wlc authentication, you should configure AP are capable of doing authentication when they lost wlc connectivity.
To convert lwap in autonomous, it is not a big deal. Have a look here: https://supportforums.cisco.com/document/57476/lwapp-autonomous-conversi...
PS: Please do not forget to rate and score as good response if this solves your problem
-
Hi all
I'm looking for documentation on how to convert a LWAP 3702i in stand-alone mode, but not having a chance.
All the answers have been evaluated. Thanks in advance!
Start with the image of IOS, ap3g2-k9w7 - tar.152 - 4.JB5.tar. Then the release notes: OL-31714-02 (1) who says you're out of luck, unless you DO not want to see the Site of the investigation with the 3702!
The RN also explains how to accomplish the downgrade. (Bad Oops, just do what ios)
If it is related to the WLC, then you can cli what follows:
config ap downgrade tftp server tftp filename name-access-point address for example:
the investigation of config tftp-downgrade 192.168.1.10 ap ap3g2-k9w7 - tar.152 - 4.JB5.tar
You can also find tips for Rasika to your taste for the manual method:
http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
-
Access point of the AIR-CAP1602E-N-K9
Hello
can someone help me set up AIR-CAP1602E-N-K9 as autonomous access point.
This is a new default affecting by my knowledge, it's a point of access controller based pls if help how to convert in autonomous access point and the image that is compatible with that.
Hi Kamal,
Hope links below will keep you started with LWAP autonomous.
http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/u...
https://supportforums.Cisco.com/docs/doc-14960
http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
For standalone AP, you can use the configuration below. In the link below, you can skip the configuration under 'bridge Configuration.
https://supportforums.Cisco.com/document/61936/autonomous-AP-and-bridge-...
Hope that helps.
Concerning
Najaf
-
is it possible to AIR-CAP1602E-A-K9 config without controller
I bought a preowned AIR-CAP1602E-A-K9 home installation. I did not realize that she needed a controller and must set to work on his own. Is this possible? any help would be greatly appreciated.
Hi Rendell,
AIR-CAP1602E-A-K9, is a controller based 802.11a/g/n.
Should be a function controller.
I think that you can try to change Lightweigh offline, then you can use these APs. (I never used 1602E ap).
How to change light weight to stand alone:
Please check the latter:
https://supportforums.Cisco.com/docs/doc-14960
http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
Concerning
Remember messages useful rate.
-
Join CISCO AP 1041N to a series of 2500 WLC
Hello
I have a problem to join CISCO 10 AP 1041N to a series of 2500 WLC.
I have the following network architecture,
A Windows Server 2012 R2 (DC, DHCP and DNS server) connected to the CISCO 2960-X Series (this switch is connected to 2 other switches, same model), 10 of the AP and the WLC are connected to the same switch, as I have 3 NIC on the server I use one for Internet between the firewall and the other three are teamed together and connected to the switch.
I tried the following methods:
-J' used the 43 Option on the DHCP server: does not work
-J' added 2 DNS entries (cisco-capwap - controller.mydomain and cisco-lwapp - controller.mydomain): does not
-UDP Ports CAPWAP and LPWAP are enabled on the Windows Firewall: does not
My WLC is set mode controller Master, I see all of the AP in the DHCP server with IP addresses assigned by the server and the WLC as well, and they can ping each other.
Furthermore, the WLC, I have one (management) interface with VLAN ID 0, the server has (VLAN by default) no assigned ID, the switch have VLAN ID 1 (default) and I tried to change all the on the same VLAN ID 1 (server, Switch, WLC) in this case the server is not able to communicate with each other and DHCP does not work.
Thank you for your help.
Oh, your APs are standalone, that is why they can't join the WLC. Convert into light! Here's a good guide - http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
-
Cisco 1602i series Access point installation
Hello everyone. I tried to configure cisco AIR-CAP1602i-E-K9 series access point is default for the configuration files and other settings, I guess you are looking for WLC. but I do not have a WLC I want to configure the AP a standalone conceerne Access point. I connected via switch where all the ports on the switch are vlan 10 switch is connected to a router and I have configured the router as DHCP server. It is my first time that I've never touched a cisco point for configuration of access. below is the error that was coming up on the screen countinously when I access the AP via the console. Kindly any assistance in this regard would be highly appreciated. Thank you
* 00:18:46.324 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
Not in a bound State.
* 00:19:31.824 Mar 1: % 3-CAPWAP-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
* 00:19:36.828 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.
* 00:19:36.948 Mar 1: DHCP-6-ADDRESS_ASSIGN %: BVI1 Interface assigned address DHCP 10.10.0.218, mask 255.255.255.0, hostname AP64f6.9dee.87d1Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:19:42.824 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.* 00:19:51.823 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
Not in a bound State.
* 00:20:37.323 Mar 1: % 3-CAPWAP-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
* 00:20:42.327 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.
* 00:20:42.447 Mar 1: DHCP-6-ADDRESS_ASSIGN %: BVI1 Interface assigned address DHCP 10.10.0.219, mask 255.255.255.0, hostname AP64f6.9dee.87d1Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:20:48.323 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.* 00:20:57.323 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
Not in a bound State.
* 00:21:42.822 Mar 1: % 3-CAPWAP-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
* 00:21:47.826 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.
* 00:21:47.946 Mar 1: DHCP-6-ADDRESS_ASSIGN %: BVI1 Interface assigned address DHCP 10.10.0.220, mask 255.255.255.0, hostname AP64f6.9dee.87d1Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:21:53.822 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.* 00:22:02.822 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
Not in a bound State.
* 00:22:48.322 Mar 1: % 3-CAPWAP-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
* 00:22:53.326 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.
* 00:22:53.446 Mar 1: DHCP-6-ADDRESS_ASSIGN %: BVI1 Interface assigned address DHCP 10.10.0.221, mask 255.255.255.0, hostname AP64f6.9dee.87d1Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:22:59.322 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.* 00:23:08.322 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
Not in a bound State.
* 00:23:53.821 Mar 1: % 3-CAPWAP-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
* 00:23:58.825 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.
* 00:23:58.945 Mar 1: DHCP-6-ADDRESS_ASSIGN %: BVI1 Interface assigned address DHCP 10.10.0.222, mask 255.255.255.0, hostname AP64f6.9dee.87d1Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
If you do not have WLC, you will need to convert this access point in stand-alone mode. See below on this post. You must required image before this conversion. If you have a support contract with Cisco you can download from Cisco.com
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://mrncciew.com/2013/12/13/AP-conversion-using-mode-button/
HTH
Rasika
Pls note all useful responses *.
-
1131 AP to WLC 2106. IP address is assigned, but will not join.
the installer is: 1131 AP connected to 2106 WLC connected to the xp machine to access the console windows. for testing purposes only are not connected to the network/internet still. the WLC will be connected to the internet eventually.
Scope DHCP is configured and address. I can ping the management WLC AND the IP of the console of the AP ap-Manager, but can not ping the AP from the WLC console.I read - troubleshoot not joined Lightweight Access Point is not a wireless LAN Controller and most all other tech notes.
I can use the commands of DEBUG on the AP but I don't see any output on the screen or to capture or see the WLC console connection IE. Debug lwapp package activate or activate debugging capwap package but there is no output that I can see and search.Someone at - it ideas? Happy to post debugging logs if I can get.
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(21a)JA1, RELEASE
This is your culprit. The IOS that you are running is an autonomous access point. You need to load/run the IOS LWAP.
... And you don't need to be a Nobel Prize winner to convert AP LWAP autonomous access point.
1. download the IOS correct. The IOS LWAP has the prefix "RRs" in its file name.
2. copy the "RRs" image in your access point using the command ' archive download-sw tftp: / /.tar.
3. make sure that the boot variable changes for a startup to the image of "RRs".
4 charge your AP.
Be sure to note our useful messages. Thank you.
-
The upgrade of Cisco 1600 access points
A customer has Cisco 1600 12 access point and they want to add 3 access points. These access points are autonomous access points and the customer is tired to make individual changes by access points. I suggested that the new access point be base controller, so my question; These existing access points can be upgraded to LWAPP? Or do need to be replaced? Or this controller one web-based access to existing contact points and be controlled.
so my question; can these existing access point be upgraded to LWAPP? Or do they need to be replaced?
Yes, existing AP can be converted into TOUR mode with a recovery image. Here's how you can do it (note that there are several ways) http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/ http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/ is the good idea to get a WLC (like 2504) to manage in a simple way, rather managing them individually. See below the product bundles available. If this is the case, you will get with license 25AP 2504 for almost for free when you buy 2 x 1702. Make sure that you choose the product of appropriate regulatory AIR-AP1702I-A-WLC HTH Rasika * Pls note all useful responses *. -
Cisco 1142 - configure Terminal disappeared?
Team,
I have a Cisco AP 1142 that I am using, the question that I have met, it's that I don't have the possibility of entering the terminal configuration mode. I am really confused as to why I can't access the Terminal configuration (conf t) to the AP. I'm working on a large number of AP, but it seemed to lift my curiosity as to why?
I posted the info version as well as help (?) menu structure. Any help is greatly appreciated.
-------------------------------------------------------------------------------------------
AP003a.99eb.7e63 #SH worm
Cisco IOS Software, C1140 (C1140-K9W8-M), Version 15.2 (2) JA1, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Updated Thursday, January 23, 13 12:13 by prod_rel_teamROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 program boot (BOOT-C1140-M), Version 12.4 (23 c) JA, VERSION of the SOFTWARE (fc3)AP003a.99eb.7e63 operating time is 5 minutes
System return to the ROM to reload
System image file is "flash:/c1140-k9w8-mx.152-2.JA1/c1140-k9w8-mx.152-2.JA1".
Last reason for reloading:This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.htmlIf you need assistance please contact us by mail at
[email protected] / * /.Cisco AIR-LAP1142N-A-K9 (PowerPC405ex) Prozesseur (revision A0) 81910K / 49152K bytes of memory.
Card processor ID FTX1528K5S5
PowerPC405ex CPU at 586 Mhz, the 0x147E revision number
Last reset of reloading
Image LWAPP 7.3.112.0 version
1 gigabit Ethernet interface
2 802.11 radios32K bytes memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: 00: 3A: 99:EB:7E:63
Part number: 73-12836-02
Kit numbered PCA: 800-33767-02
Revision number of PCA: A0
Serial number of PCB: FOC15254JU1
Top Assembly part number: 800-33775-01
Top of page the Assembly serial number: FTX1528K5S5
Top of page revision number: A0
Product/model number: AIR-LAP1142N-A-K9Configuration register is 0xF
You have light AP requiring WLC to manage.
You need to convert offline if you want to use as Standalone AP
http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
HTH
Rasika
Pls note all useful responses *.
-
Hello
I have an AIR TOUR 1142N, I want to make this AP as standalone, but I am not able to configure terminal command and I don't get too interface BVI
show ip int in brief
I send you my running configuration Access Point
APa493.4c52.a91f #sh run
Building configuration...Current configuration: 16735 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname APa493.4c52.a91f
!
enable secret 5 $1$XhAv$99uKdgB4Jo.dhS1TKchY//
!
!
Crypto pki trustpoint Cisco_IOS_MIC_cert
revocation checking no
rsakeypair Cisco_IOS_MIC_Keys
!
Crypto pki trustpoint cisco-root-cert
revocation checking no
rsakeypair Cisco_IOS_MIC_Keys
!
Crypto pki trustpoint airespace-device-root-cert
revocation checking no
rsakeypair Cisco_IOS_MIC_Keys
!
Crypto pki trustpoint airespace-new-root-cert
revocation checking no
rsakeypair Cisco_IOS_MIC_Keys
!
Crypto pki trustpoint airespace-old-root-cert
revocation checking no
rsakeypair Cisco_IOS_MIC_Keys
!
!
string Cisco_IOS_MIC_cert crypto pki certificates
certificate 2333A54B000000080D96
30820470 30820358 A0030201 02020 HAS 23 33A54B00 0000080D 96300-06-092A 8648
86F70D01 01050500 30393116 30140603 55040A 13 0D 436973 636F2053 79737465
301 0603 55040313 16436973 636F204D 616E7566 61637475 6D73311F 72696E67
1E170D31 20434130 32303531 34323034 3035325A 170 3232 30353134 32303530
35325A 30 818C310B A 30090603 55040613 02555331 13301106 03550408 130, 4361
6C69666F 726E6961 06035504 07130853 616E204A 6F736531 16301406 3111300F
0355040A 130D 4369 53797374 656 7331 1B, 301906 03550403 13124331 D 73636F20
61343933 34633532 61393166 3134302D 3120301E 06092A 86 4886F70D 01090116
706F7274 11737570 636F2E63 40636973 6F6D3082 0122300D 06092 HAS 86 4886F70D!
username Cisco secret 5 $1$ Jug8$ lzs5T1AoQfo8e3tXN05uy.
!
!
!
interface GigabitEthernet0
customer_id GigabitEthernet0 dhcp IP address
no ip route cache
automatic duplex
automatic speed
No keepalive
!
!
Line con 0
line vty 0 4
opening of session
!
endAPa493.4c52.a91f #.
APa493.4c52.a91f #sh ip int bri
Interface IP-Address OK? Method State Protocol
GigabitEthernet0 unassigned YES other upward to the bottom
APa493.4c52.a91f #.
* 00:20:44.944 Mar 1: % CAPWAP-3-Journal of ERRORS: do not send discovery request AP doesn't have an Ip address.
And I get this error message
CAPWAP-3-ERROR log %: do not send discovery request AP doesn't have an Ip address.
Shoud I have to reset the access completely, need help point.
You can enter in the mode of a TOWER configuration using command "debug console cli capwap' as shown below
3600-1 #debug console cli capwap
This command is intended only for debugging/troubleshooting
Any changes to the configuration may cause different
behavior of centralized configuration.
CAPWAP console CLI allow/disallow the debug is on
3600-1 #conf t
Enter configuration commands, one per line. End with CNTL/Z.
3600-1 (config) #.
Below should help you to go AROUND to the conversion of the IOS
http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
HTH
Rasika
Pls note all useful responses *.
-
The Access Points of 1142 conversion of autonomous to LWAPP
Hi all
I'm trying to convert 5 1142 APs to LWAPP... they came as autonomous APs out of the box, but the client decided to go the unified road, so I need to convert them to finish the job. I tried to use that tool to upgrade to ver 3.4 and it say that the AP 1142 is not supported by the upgrade tool
Is there another way to do this?
Thanks in advance!
Console or SSH to your access point and enter the following command:
Archive Download-sw tftp://x.x.x.y/c1140-rcvk9w8-tar.124-21a.JA.tar
x.x.x.y = the address of your tftp server.
just like the upgrade to any newer device of Cisco. Of course you need a running tftp server, ect.,...
Good luck to you.
Doug
Maybe you are looking for
-
HELP me GET MY @# $% ^ &; *! VIEW PROFILE!
How MUCH MORE @# $% ^ & *! SAYS I NEED TO BE!
-
Satellite M100: XP asks me to block Intel graphic driver
I installed the update of the page of toshiba Intel graphics driver.After the reboot, I have problem. Every time, at every start, Xp asks me: run the driver intel drivers or Intel block start. What should do?
-
I just bought a T450s and wonder how long a 3 new battery should last. The product page says that you can get up to 17 hours of use with a battery 6 cells, but does not offer any information on the 3 cell (which is what the computer actually comes wi
-
Also have problems with the link to Pandora. Follow the instructions for the Sony Essentials link, but when I finally log on my account, it asks you a device code. When I go to the according to the blu - ray player - it shows as "registered device. N
-
After you delete the files from the drive 'C', the fragmenteur of disc (under Tools) does not work. What should do?