M1X71UA #ABL: Ubuntu 1604 boots with white screen

Similar Questions

• Satellite Pro 4030 boots with white screen - works OK on an external monitor

  My sat 4030 pro, Vibrio W98SE, boots to a white screen. When I press the lid closer, or use Fn/F5 it turns black. It works fine on an external monitor.

  Hi Robert,.

  If your screen is displayed correctly on an external monitor, then it indicates that your chip graohics still work correctly, then you the problem must be with the LCD itself, the FL inverter or the connecting cable to the main Board. I would recommend that you contact an authorized Service partner who can perform other tests to diagnose the fault.

  Kind regards

• Satellite L750 sometimes lit with white screen after hibernation

  When I got the system, sometimes awake hibenate with white screen!

  I noticed, when this happened, 'toshiba eco utility' is frozen.
  So, I think that: Toshiba Eco Utility is crushed, put into hibernation system and the awakening of the race, but screen blink.

  This time I push the power button, the system go to sleep and next push is normally awake!
  I don't know why. I use this app Eco Utility, but I'll delete it.

  Anyone?

  You deleted the Toshiba eco utility of the system now?
  Did you notice the same problem when you Hibernate your laptop using other profiles of power?

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.

• Satellite A300-1LT won't boot up - white screen & no HARD disk activity

  I had a problem, the touch pad does not work.
  I found on the internet solution to stop computer, take out the battery, wait a bit and try again.
  That's when my problems start.

  When I put the battery back on, I turned on the laptop.
  White screen (nothing happens), led indicators are on (except for the hard disk), cd drive tries to read but nothing happens and the fan is running.
  I tried everything I could find (wait 30 minutes, take out, start without battery battery, etc.) but no luck.

  My lap top is Satellite A300-1lt, and I got 2 months.
  I don't want to take it to the service, unless it is really necessary, because I really need now, I can't wait for weeks until what he returned.

  Please can someone help me out, Im desperate...

  Thanks in advantage...

  Connect your laptop (with battery) to the power supply and leave an hour, try to restart your laptop. If portable starting again let it run until the battery will be fully recharged.

  I hope that it will work properly again. I had a similar problem with my Satellite A300-1LI, and I do this. Laptop now works perfectly with or without adapter.

• Studio 1535 with white screen and "ERROR CODE: 0321 LCD EDID - EDID EEPROM ACCESS IMPOSSIBLE.

  Studio 1535 (laptop with Vista and NOTE from the ADMIN: tag removed in accordance with the Service Privacy Policy > suddenly, showing no display a few days ago.)  I tried to unplug the power cord and the battery, and make a stop by pressing the power button, but none of these methods have had no effect.  I got nothing else than a white screen, but when I fix a monitor external, everything works fine on the external monitor.

  Also, I have the flashing volume control keys and I was wondering if this could be a clue to what is happening and what needs to be corrected?  The Mute key and the Volume up key flashing on and outside at the same time.  The low Volume key is regularly.

  Then I run the diagnostic test that I had "ERROR CODE: 0321 LCD EDID - UNABLE to ACCESS EDID EEPROM '

  No idea if this could be a backlight or LCD question, question of video chip or broken cable?    Thank you!

  Hi JITeglia,

  I suggest you to replace the LCD LVDS cable on the system first, since it is the cheapest part. If the system is still facing the same issue to replace the LCD screen.

• X 200 fails to start with white screen

  Hi guys, I made the problem this morning. When I tried to start the computer, it could not start. the machine was normally closed the last time. with no beep, the screen remains white and black, without any modification. After 2 seconds after you press the powerkey, he was arrested with a short beep. Here is what I tried:

  1, use an external hard drive and a disc of windows 7. no reaction.

  2, remove the AC and battery system. Press and hold the power button several times (3 - 5 times) for a 5 secondsReconnect AC account and press the power button - if the system boots normally, stop and insert the battery. does not work.

  Moreover, the machine was purchased in Hong Kong and is still under warranty. However, I am currently in Germany and will stay for another 3 months.

  anyone with any suggestions? Thank you.

  Fixed it by disabling CMOS, wow had

  According to: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...

• Windows 7 Professional with white screen and the mouse cursor

  I have a Dell Latitude E4310 running Vista professional 7.

  It worked fine with no problem except when I turned it on this morning.

  He went through his normal boot sequence (Logo Microsoft...) and then instead going to my office for display, the screen stayed black with only my visible mouse cursor.

  I can boot into safe mode and my desktop is visible.  I don't know what to do at this point and would be grateful to anyone who helps.  Thanks in advance!

  Hello

  Do a Safe Mode system restore to before the problem.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  __________________________________________________

  If that does not fix it:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• After update to OS 10.11.2 iMac 27 "starts with white screen. I can see it on network files and access of it.

  Have a new iMac (retina 5K 27 - 1nch end 2015) with fusion of 1 TB drive. A migrated an older iMac using Time Machine and everything worked fine until I updated to OS 10.11.2 yesterday evening. He lights up now with a blank black screen and all I can see is the cursor. Can someone help, thanks.

  Don't forget that you have 90 days of free telephone support, 3 years if you bought AppleCare.

  Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

  Reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  and PRAM How to reset NVRAM on your Mac - Apple Support

• Acer Aspire R7 - 572 stuck with white screen

  My windows was stuck and I pressed the power button / stop with force. After that turned it back on it was blocked on the acer boot logo I pressed ctrl + alt + delete. It was not the passage of acer logo. Finally, he showed the automatic recovery of windows on the start screen. Since then his black screen stuck on its been nearly two hours. Nothing has worked.
  Help, please.

  Nene,

  I regret that the computer does not load Windows. I would recommend using recovery media to restore the system to factory settings. If you don't have a recovery media, this can be bought through the store.acer.com or by phone with technical support.

  If the recovery media is not available, you can always contact our technical support in your region for assistance. The question might also be related to the HARD drive and would need assistance.

• Windows 7 Pro: crashes with white screen after login

  Dear community,

  I have an annoying bug with Windows 7 Professional (64-bit version) and could not find any problem even until that or other forums.

  After logging in (choose user and entering the password), the "Welcome" screen appears for a few seconds. Then there is a blank wallpaper (i.e. According to the user settings) and the system is blocked. Everything you see is a mouse cursor (a regular), who move, but not possible interaction.

  It does not work to get the Task Manager with CTRL-ALT-DEL in that State, and at least until 30 minutes just don't get past/changes. However, there is ongoing activity of hard disk, according to the LED. Only way out is to cut using the power switch.

  The accident happened exactly regularly, but about every start of the second. Sometimes more often (i.e. it takes 3 or 4 attempts to open a session) or sometimes less often (i.e. up to 3 or 4 boots without problem).

  Other than that, it is once you have successfully connected, the system works very well.

  I tried to remove the user and re-create it, but the bug reappears immediately after.

  Any ideas? Or advice where I could find what program/process is actually blocked?

  Hi Ruth & all,

  Thanks for your suggestions.

  Troubleshooting took a long time, because I do not use this PC every day and sometimes you can't tell if the problem is really gone or the boot just happened to work several times in a row...

  After all, using the clean boot and the reactivation of services/startup items one by one, it seems that I could single out the Internet of G-Data as a cause security suite. I'm trying to do, with their support, if this is a known bug.

  Best,

  Colin

• Install Windows 8 will fail with white screen

  Hi all

  I am trying to install Windows 8 32-bit on an Acer Aspire 5710 G. The installation goes very well and resets, 1 - 2 times normally. Happens to the configuration of the devices and about 73% then the screen is blank. I leave for a few hours, but it just not right. When I walk, it reports on the electric installation has failed and restores the installation (BTW really nice feature).
  The symptoms are very similar to this post, but my hardware is very different. http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/blank-screen-at-the-very-end-of-Windows-8/8427b0c0-ccf0-46CB-B274-6af2a31eefdb
  The laptop is old for a few years, but past fine Upgrade Advisor. Specifications of the laptop are:
  -Intel Core Duo T2450 (2.0 GHz) 1
  -ATI Radeon HD2300
  -3 GB RAM
  I tried the following installation combinations:
  -Upgrade files now.
  -Update do not keep files.
  -Boot from DVD and remove my existing partitions.
  After some research, I also tried:
  -Connect an external monitor and the TV where the video was going to a different output.
  -Check the BIOS updates - I'm using the latest version and given the age of the machine do not expect not yet updated.
  -Disconnect all the extra material with the exception of a USB mouse.
  -Check the settings of the BIOS for NX etc but there is nothing that seems useful. BIOS Acer has very few options.
  Someone at - it any other suggestions? Or know of any incompatibility with the above material? I wonder if the laptop is just incompatible with Windows 8, and Upgrade Advisor simply doesn't know about yet.
  Thank you
  Brett.

  After having no luck here or via Acer I have renounced the upgrade to windows 8. Called the MS store and got my refund processed today.

• start with white screen and a page named do not work

  Firefox always start with most recent screen.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  The user.js file will be present if you or a other software created this file and normally will not present.

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  Do not change the line browser.sessionstore.resume_session_once and change its value to false, but either delete this line or remove the user.js file (recommended if you have not created this file).
  The normal use of this pref is to reload the tabs when you need to restart Firefox (update or install an extension).

• I've updated Firefox to 22.0 then became: config to change the font size. Well I put it a.005 then firefox went completely empty with white screen

  It also has what looks like maybe an Asian symbol upwards in the left corner, and I can't do a thing at all. Very frustrating because I can't find anything online to help... Thank you. Let me know if you need more information.

  You can also consider temporarily create a user.js file to initialize the layout.css.devPixelsPerPx pref a more reasonable value.

  • http://KB.mozillazine.org/user.js_file

  user_pref("layout.css.devPixelsPerPx", "1.0");
  

  This should make it possible to start Firefox.
  
  After you close Firefox you must remove the user.js file, otherwise you will not be able to make lasting changes on the topic: config page.

  • http://KB.mozillazine.org/Editing_configuration
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Note that 0.005 is considered to be void, the pref accepts only two decimal places (in percentage) and same 0.05 would be too small.
  
  You should always start with 1 and increase or decrease the value of 0.1 and refine with 0.05.

• Satellite Pro A300 crashes with white screen

  I have a Satellite Pro A300, AMD processor, Vista, ATI graphics card.

  The system worked fine for a year, but there are a few months, he started crashing, the screen went white, not blue, whatever it be running, like music, stopped. This can occur after several hours or minutes, or even if he is re-start. All my software is up-to-date, Microsoft and Toshiba. I rebuilt my system from scratch and the symptoms came back.

  At first I thought that this could be a heat problem, but I followed this but I don't think that's it. It crashed seconds after leaving standby mode when it has not had a chance to warm up.

  Anyone have any ideas?

  Simon

  Hey Buddy,

  Theoretically, it might be an overheating problem so the screen became due white built in overheating protection...

  You should try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  In your case, I recommend reading this article: