M200 cracking plastic

Similar Questions

• Replacement parts HP TouchSmart tm2t-2100 body plastic

  my friend () has fallen from a laptop and border around display of cracked plastic. Even if the continuous computer work without problem, the aesthetic aspect is it bothers. The laptop is still under warranty, but I doubt that the repair can be done for free.

  My questions are:

  1. is it possible to order the broken plastic piece?

  2. how much HP would charge for replacement?

  3. is there a third party repair center that can order and replace the part?

  Best regards

  Pasha

  

  good news. I found the part on the hp site, it called bezel! costs $42.

  How it would be difficult to set up?

• T61 * that I buy a good?

  Hi all!!!

  I'm new here and I hope you experts can help me!
  I bought a Lenovo T61 online!

  EBay link

  It is reported as renovated Mnufacturer.
  Of course, I am aware of the nVidia "Material-bumping problem" then I contacted the seller prior and requested information on the material.
  HE / SHE tells me it's a "7665-08/08"unit. "
  It comes with the NVS 140 m and a C2D 2 GHz.
  I offered him $300 and my offer was accepted so Im really happy now!

  Can I be % shure 100 this T61 came with the GPU "fixed"?
  Also does the crack plastic easy on of T61? (my t20 looked as if she had blood vessels... xD)

  Thanks for helping me!

  I said it before, but I'll repeat for any new readers.

  If it were possible to tell if the GPU was improving the design of codes/dates on the GPU, Lenovo would not have had to dispose of the countless boards in July 2008 where they were all replaced with the new plates with a new design of the gpu. I believe that the best and more coherent data show that many nVidia factories produced simultaneously, both stamped with the same number and date. There is no conclusive to tell, far from having a (destructive) microscopic autopsy by an expert from nVidia, but the only credible evidence which is the date of manufacture of laptops from 08/08 or newer means, you have the right chip, all the rest is speculation. Also, the rare and few cases of a unit of 08/08, for lack of a way that looks like the failure of gpu is far from conclusive, and there the old design. To assume that these would imply that the 'improved' design was indestructible, and it is not. All electronics are failing at their time, the difference in the two models is that the prior does not often, so take one or two isolated examples of a new design that may or may not have a GPU has failed and that all units of nVidia, built with the same codes are bad, the extrapolation is really bad science.

  You can open and examine the chip if you want and it would not be a bad idea to clean and replace the thermal compound, but the numbers on the chip don't mean much. The only important thing you learn is if the jury had been replaced by a jury of rechipped, in which case the nVidia chip would have a slightly different logo and a date well beyond the period of production in series t61. Personally, I would have preferred an original 08/08 or later during a rechipped Council Council, but should have a good GPU.

  As for the price that you paid, $300 is more then just for a 08/08 unit, even for the lesser model 14.1 widescreen. If there was a 15.4-inch model, then I would say you got a real bargain.

• How knows the dv9000 that cover is open until display lights?

  DV9000 series hinge broken, as it froze and cracked plastic cover screw holders.

  He leaves so now I get it from my dad.

  It happened, worked at the screen. Then he left. We look at the left hinge has frozen.

  I can replace hinge, but how does he know that the LCD screen is open to market?

  What type of switch how it works?

  Sdowney.

  There is a small Board that has the power switch on it and the reed switch is connected. "" CN4.

  Remove the connector of the make the LCD stay on all the time.

  I hope this has solved your question.

  REO

• Question about the protective mask cracked Portege M200

  Hello world

  I have an urgent question, who need your help. I have a Portege M00 tablet pc at home, and the Portege M200 LCD screen is covered with a protective mask. But yesterday I closed the laptop without notching of the pen between the screen and the keyboard. now the protective mask had been broken and the screen of the laptop is ok. So I want to know is - can I change the cracked by a new protective mask?
  Has anyone experience this? Thanks in advance!

  Hello

  I think it should be possible to replace this protective mask.
  But I put t found any offers on the web.
  I recommend you ask the service partner to help him. Maybe he can order this mask of protection for you.

  Good bye

• Portege M200 display issues

  Hello. I just got my new M200 tablet pc, but the display is sluggy compared to my screen Tecra S1. Looks like there is something on top of the display Assembly that makes sluggy image and the colors too. This can be seen especially on white background. Is there a plastic to remove, because I looked and I think he does not like or is it normal for the tablet PC?

  Hello

  The Portege M200 LCD screen is covered with a protective mask. This protective film is integrated into the LCD mask to prevent scratches on the LCD Panel - caused from dirt or handling - caused by the use of the pen.
  You can't compare these two screens (Portege Tecra) for Portege is tablet pc with the protective mask and Tecra has a very different display with other properties.

  Good bye

• Satellite Pro L100 - where to find the plastic lid frame?

  Hello

  I put t really know if this is the right place to post this?
  I have a satellite Pro L100. I had for about 2 years.

  On the first day, I had problems with plastics in the screen and the "lid" two cracks they been replaced twice.
  Today already, I need to buy a new one but I run problems trying to find part numbers.

  I know as L100 model number but they keep asking for a number three-digit and I have no idea where to find it.

  So on that help in would be great.
  Also how can I find the part number for the plastics?
  It happened at the stage where the screen is about to fall!

  Please help, thanks

  Hello

  Usually the laptop model number and serial number are at the bottom of the device!
  There are different labels and one of the labels should provide these figures.

  Then you can contact the Toshiba ASP in your country to order framework compatible display.

  I put t know the part number, but I m the ASP would be able to help you

  Matt comes to the Paris

• Satellite P300 - cracks around screen

  Hello

  I have a P300 with 17.1 "display.
  The plastic around the screen is cracked (the screen is fine).
  Is it possible to replace this part?
  Where would I be able to get it?

  Thank you

  Hello

  I assume you mean on the frame plastic around the screen of the laptop.
  Yes, it can be replaced, and if you need this part then you can order from the service authorized in your country, such partner mentioned by Akuma.

  The guys would be able to replace the part too if you n t have no qualification of disassembly laptop.

  Welcome them

• Crack/tear on a ThinkPad L440

  Dear community of Thinkpad

  I have something strange with my ThinkPad L440. During the closure of the screen, the left hinge did a crack/tear in the plastic cover at the back, near the air inlet and the port of the charger. Does anyone have the same problem or is it just bad luck? It's my first ThinkPad and I have read a lot of good things about the ThinkPad but it really disappoint me. And it's only 8 months...

  
  

• Cover the problem of crack on Satellite P100

  The external plastic of my laptop has started to crack near the hinges. I called Toshiba some time ago and they said that because it was just apparent defects, it was not covered by the warranty.

  However, it has gotten worse over time, the plastic part is broken now and I'm sure that this will lead eventually to need me to repair. Is there a way I can email Toshiba?
  My guarantee is now sold out.

  Hello

  Unfortunately there is no email support, but I suggest you contact the nearest available toshiba servicepartner and talk with them. The link to find one is here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck and good weekend

  Welcome them

• Touch screen cracked Photosmart 7510

  A slight crack appeared on the touch screen of our Photosmart 7510. It does not seem to influence what that except the copy, but we use it a lot so it is important. Does anyone have experience with this? We better try to get it fixed (I did not to HP again because we are not under warranty) or it would make as much sense to just buy a new.

  I do not think that the screen is cracked but the cover plastic. It's just a hairline from the lower right corner thanks to the black buttons and color on the copy parameter.

  Thanks for any idea.

  You could call HP and get an estimate, assuming it's fixable.  Other that that, might want to buy a new.

• R51: Cracked base, stained glass panel LCD, very bad underwriting experience

  Hello

  I recently sent my laptop for repair Flextronic (Solectron) for a problem with my LCD. On the screen LCD, about 50 grey dots appeared near the Center. They were not dead but pixels spots on the back of the Panel. Before you send the laptop, I checked it and found a crack near the left hinge. I'm on this R51 like a baby and it is in perfect condition with no mark or scratch on it. I noticed the hinge was loose for a few months, but I never checked the cause of this. Now, on the crack, what I noticed is that he depart when I lift the lid and it remains extended as long as the lid is raised. The hinge clearly pushed on the plastic and I am 100% sure that this is what caused this crack. I got a call two weeks after receipt of my laptop in the repair center. They said that they would replace the LCD, but they would charge me $140 to replace the base... I fight with them since to get this base replaced under warranty. I paid for a 3 years guarantee of the site and they don't even offer me the on site service I paid for... I've been without my phone for 3 weeks now and I find it very frustrating.

  Here are some pictures of the crack, on my R51 and the R51 of someone from another forum:

  http://picasaweb.Google.ca/picasawildchild/ThinkPadR51Public#

  Someone else knows a similar crack about a series notebook R5x?

  Thank you

  Gabriel

  
  

• How to crack open a Sandisk flash drive

  I was just curious to know if anyone knows of a module fail-safe way to crack open the plastic packaging of these flash drives. It does not matter I've got 4 GB, 8 GB, 16 GB and 32 GB models. If you can show me how to open one of them I should be able to open the rest of them. I tried to use a precision screwdriver set you those that are very small but can always not the case to open. It is off warranty so no worries there.

  Thank you

  A new question.

  I suggest a sharp chisel and faucets of light on the side of the case.  Another option could be a knife all-purpose Baden and faucets of light on the side of the case.  A hair dryer can soften the plastic but could also fire from inside.

• The screen cracked on tx 1000. Replacement options?

  Hello

  I bought my tx 1000 something like 2 years ago now. He is totally out of any warranty period, but no did me not no problem (although I will be swapping hard drives soon because I have a sixth sense sense that it is about to die). At a party in the new year, I've walked awkwardly on my computer, which was in a neoprene sleeve. The next morning I woke up and found the screen was cracked (see photos). This does not affect the quality of image or real output on the screen itself; the only thing that is broken is the piece of plastic/glass in front of the screen.

  I was wondering if anyone knows what are my options for repair or replacement. I am very very well on the technical plan and am confident I can do the repair myself if spare parts are available. Otherwise I would like to know how much it would cost me to send it to fix. I can just try to turn it off as cheaply, I can and get a new tx2 or even dv3 pledge.

  Here are pictures of the damage.

  

  

  Thank you

  -Thomas

  I think your best bet is to call support, they will give you an estimate on your fixed screen getting, but you will not really receive the exact amount, until you send it and they look, then they will call you and tell you how much.
  You can then decide if it's worth the repair or if the money is better spent on a new laptop

  Of course you say that you can still use it anyway, and even without the internal screen you could hook it up to an external monitor, so it has some value.

  You can also just look at how new are now anyway, I think the new TX series is probably cheaper than when you bought your model again.

  There are also those new Netbooks good market as well.

  "You pays your money, takes you your choice."

  Once that I could build computers cheaper than to buy new ones, but not more these days.

  Happy shopping & good luck.

• Untied multiple cracks on screen

  Hello

  If iphone Gets a crack between the angle, which is supposed to be the most difficult part in the 6s iphone, is there a chance that Apple replace the glass for free.

  If Apple determines that the crack was not the result of a fall, which is considered a breach of use, they can make that call. However, if you drop the phone, I doubt that they replace it for free. It's their call any. The only way to know is to ask. Take a go-Genius Bar at the Apple Store nearest to check.