M40X-250: Unstable connection Wireless 54mbps

Similar Questions

• Portege Z30T - A - 10 X unstable connection Wireless

  Hello Forum users!

  I would need a Council to deal with my wireless adapter. It connects OK when the laptop is after the restart, but if I take the it of sleep mode, it has problems to connect to any wireless network. Usually, it connects after 10 minutes to turn off/on repetitive adapter. Sometimes, the adapter also removes the connection to Skype call center. This behavior is independent of the network, including the adapter. What could I do?

  Thank you!
  Jakub

  Hello

  Did you notice a difference if you use laptops with power running or using it on power electric battery?

• Problem starting on Satellite M40X-250

  For some time, I'm having a problem with an old laptop, the Toshiba Satellite M40X-250.

  When I try to boot this laptop, the headlights turn on, I can hear the hard drive and fan from, also I can hear (if I have one there) station cd read cd/dvd.

  But nothing else happens, the screen remains black and there is no way I can make it work.

  I quite know something on the desktop, so I disassembled the laptop completely and just cleaned and after I reassembled it again, but that had no effect, I can not even boot up the laptop.

  There is however another strange thing, it is very rare, but sometimes I get to start, but at some random point (very quickly, because I can't actually use the laptop) it is for me a BSOD (Blue Screen Of Death) with an error code, I think it was 0x000000EA. In any case, this meant a driver problem with the graphics card. It gave me an error ATIDVAG.

  But most of the time I'm still not able to start.

  Now, it's a very old laptop and I have tried everything,.
  I tried to start without battery (disconnected) and only the power, without result.
  I tried to start only with the battery, no results.
  I tried to unplug the power supply and the battery, then press the power button / stop for 60 seconds, no results.
  I tried several rescue cd, a linux installation cd, windows installation cd, it resulted in nothing.
  [EDIT] I have also connected to the laptop to an external monitor, but that did not work, no results.

  I'm really lost now, I have tried everything I know, and I've never met a problem like this.
  Maybe it's just the fact that material became old and it is better to give up, but I would really like to know if there is someone who can help me and maybe give me some ideas on what I can do.

  I am very familiar with the inside of this laptop and I know what to do. I don't want to not call me an expert, maybe it is a little off, but I know my way around.
  so, if anyone has a solution, let me know.

  Regards and thanks in advance.

  Claire Bosman

  Post edited by: claire

  > I think it was 0x000000EA. In any case, this meant a driver problem with the graphics card. It gave me an error ATIDVAG

  In my opinion, it seems that the problem of graphics card.
  Black screen means that the display is faulty or chip chart.

  But if the internal screen would malfunction, then you should still be able to use the external monitor, but I guess that's not possible, therefore, I think that his GPU problem

• Satellite M40X - 250 LAN card does not work

  Hello

  I have a portable Satellite M40X-250. For 3 days I couldn't connect to my router. LAN card is Realtek RTL8139/810 x Family Fast Ethernet NIC I also installed Linux OS and he did. I use Win XP Pro.
  -J' have also installed new driver for the network card.
  -The firewall is disabled

  Can someone help me...

  Hi Erguder

  First of all, you must enter the Device Manager and check if there is a yellow exclamation point.
  If not, then I guess that the LAN driver has been installed successfully and that there must be another reason the failure of LAN.

  Please then check the properties of LAN. In the? General? tab you will find installed protocols. Please choose the TCP/IP Protocol and click Properties.
  All parameters (IP, DNS, getway, etc.) must be set on automatically.

  The other possibility is that there is something wrong with the router. Try to reset the router and check the settings.

• Satellite M40x-250 turns off without warning

  HII everyone,

  Hope you guys can help me. I have an old Toshiba Notebook (Satellite M40x-250).

  I don't know how old exactly, but I think around 4 or 5 years. Ive never had any problem with it, but now its weird action. Recently, I was typing something and suddenly it just turned itself off.

  I waited about five minutes before I restarted and it worked perfectly again.
  Same thing just happened half an hour ago.

  Now his works once again, with no loss of information.
  My laptop is just getting old, or would be - this other problem that could be solved?

  Thank you!

  Hello

  In my eyes it s typical overheating problem
  As you say it s a laptop plus age (4 to 5 years) and I suppose that the cooling fans have not been cleaned since the first day
  I think that there is a lot of dust and debris that prevents the cooling modules to work with maximum efficiency, this can lead to a higher temperature and shut downs.

  The laptop turns off automatically to prevent the equipment from damage
  Clean the fan using a jet of compressed air! In from time to time, and it helps!

  Welcome them

• M40X-250: what is the hidden partition?

  Hello

  I have a M40X-250 and I want to know what the 250 MB hidden partition?

  Can I delete it?

  Thank you

  Hello

  I m bit confused about your message. What hidden partition do you mean?
  AFAIK there aren t no matter what hidden partition on the device.
  If you want to see some information on your HARD drive or partitions please go to
  Administrative tools computer management disk management

  Good bye

• Toshiba AT200 refuses to acknowledge my connection wireless home

  My AT200 refuses to acknowledge my connection wireless home.
  1st time, that he could not recognize, I restarted the broadband system and then recognized.

  Now he just continues to scan and will not find the connection?
  I tried to manually force but he said that it is not in the range - even when I'm standing right next to the box.

  This is a major issue - what is a Tablet without wifi connection - right?

  > Is there a way to reset to the factory settings?
  To reset to factory settings Android, go to:
  Apps-> settings-> privacy-> data reset > reset compressed-> clear all

• What memory M40X-250?

  What memory can I put in the M40X-250?

  Welk geheugen moet ik M40X-250 bijplaatsen?

  DDR 400 or?

  Thank you

  [Edited by: admin November 12 05 17:50]

  Hello

  As far as I know that your laptop supports PC2700 DDR - RAM and 2048 MB RAM max.
  These modules are compatible:

  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Can connect wireless Compaq Presario SR5214X desktop PC?

  Hello

  I have a Compaq Presario SR5214X desktop PC. Can I connect wirelessly to the network with it? Have you looked online and I refuse to pay support to meet a simple Y / question N can I connect wirelessly to my router?

  Concerning

  Hello

  Your PC does not come with a wireless adapter, but you can certainly install one in a free PCI slot: these are the white horizontal slots shown in the bottom left of your motherboard is an example of the type of card, you need to install on the link below.

  Wireless PCI card

  Kind regards

  DP - K

• Unable to connect wireless on Satellite L300D-13 s

  Bought this new laptop Satellite L300D-13 s
  The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

  Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

  Hello

  The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
  So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
  Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
  Also make sure that your router supports standard WLan even as the WLan card.

  Welcome them

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• 5532 ENVY: ENVY 5532 has a connection wireless but not recognized

  My printer is showing a Wi-Fi connection (the light is solid and blue).  I ran a test report and all past with a very good signal quality.  When I try to print from my laptop or iphone, I get a message indicating that the printer is not connected (on my laptop) or no airprinters (on my iphone).  Before last night, everything printed fine.  You can provide any assistance is greatly appreciated.

  Hi @shaunaB44,

  Welcome to the HP Forums!

  I noticed that you can not connect wireless printer HP Envy 5532 for your Mac OS X 10.10 Yosemite. I'm happy to help you with this problem of connection!

  To confirm that your printer hardware is working, you are able to print a test page from the printer control panel? Video: print a test page.

  You see error messages on the display of the printer?

  In the meantime, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). And let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• Re: Disabled the connection Wireless on Win 7 - Portege R600

  I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
  When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

  I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
  BT Stack, etc.

  Does anyone have an idea?

  Hello

  Wait a minute;
  You want to activate; Modem WiFi or 3G?
  Please note that WiFi is not 3G modem.

  Don't forget that you have chosen and activated the modem 3G and not the WLan.

  Welcome them

• Tecra M1 cannot connect wireless

  Hello

  This new but I hope someone can help me.

  I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

  I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
  I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

  Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
  No problem connecting via a direct cable.

  Thank you

  Hello

  have you tried to connect with another machine to check if it works?
  Otherwise, I suggest the following things:

  -Disable all security features
  -update the firmware on your router
  -dhcp instead of IP´s sets the value
  -read the manual of the router, sometimes they have weird parameters

  and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

  Welcome them

• I lost my connection Wireless at home.

  I have a time capsule/router.  I lost my connection Wireless at home.  Cannot get internet connection to one of my computers/devices in the home.  Help!

  Need to load more information.

  Feeding cycle you the entire network... Start up in the correct sequence?

  Modem... Wait 2 min

  TC... Wait 2 min

  Client devices.

  If this does not work...

  Tell us everything... what model is the modem? Is this also a router?

  What model is the TC... The base A1xxx please?

  The fact the main TC on... amber green or flashing led?

  Taken in a computer by ethernet that get you internet with wired connection, just all the wireless clients are turned off?

  Tell us about such things and we can work from there.

  But I suggest you a factory reset as well... Here are the basics.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159