M9U94PA #ACJ: HDD Stats

Similar Questions

• Vostro 460 HDD fatal error of statement

  my Dell Vostro 460 Mini-Tower began to detect a HDD fatal error. It's a 1 TB drive. Anyone know what that United States a replacement compatible Please?

  mshoneyrose

  my Dell Vostro 460 Mini-Tower began to detect a HDD fatal error. It's a 1 TB drive. Anyone know what that United States a replacement compatible Please?

  mshoneyrose

  Any SATA HDD 3.5 "internal 7200 rpm or compatible, my preference would be to install a Western Digital HD, other brands available hard drives are Seagate and Toshiba.

  Bev.

• 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. Is this easier to do than to to replace a HDD with a SSD? I hope I can do it myself.

  My 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. The SSD originally came with the computer and not a subsequent update. I understand that a SSD replacing a HARD drive is quite complex, but would be more simple replacement of a dead with a new SSD SSD? I hope I could make myself.

  Even as the replacement of a HARD drive. However, go to OWC buy the connector of the special drive that has the necessary temperature control that is not part of the SSD, because it is for the stock of HARD drive.

• Is it possible to install Windows 7 on a State strong adapter w / HDD Compact Flash reader

  In addition, THIS would be as fast as a normal hard drive?

  As far as I know, Windows 7 supports not natively installed on a CF Reader because it might be the removable storage. A Compact flash drive has advantages and disadvantages. For example, it could increase the life of the battery and offers a much faster access time. However, it has much less read and write speeds higher than compared to a traditional 5200 rpm or 7200 RPM HARD drive. If you want to increase the performance of your PC, I recommend investing in an SSD.

  The common links:

  SSDS: FAQ: http://www.dell.com/downloads/global/products/pvaul/en/Solid-State-Drive-FAQ-us.pdf

  Choose the right SSD: http://www.tested.com/tech/pcs/452409-ssd-storage-essentials-your-next-pc-build/

  See you soon!

• Vista I have an ATA connected to a USB HDD, I don't have a statement!

  A vista taskbar icon indicates that I have an ATA connected to a USB hard drive, the player he reports is actually my internal drive 'C'. I can't delete this report in «stop and eject» unit because it is of course in use. I tried to remove and reinstall the USB drivers and fill all the USB slots with other devices, but even with all the slots filled I still have a hard disk that is reported. Any help her please this problem of compensation.

  I have seem this several times. It is not really a problem; You can simply ignore it.

  If you really want to get rid of the icon, you can try going to the site Web of the manufacturer and checking for updated drivers. There is an old post showing how to remove for some drivers using a key to register here: http://www.techspot.com/vb/topic35442.html

• imminent hard disk failure detected; product name: F2C07PA #ACJ; operating system: windows 8.1

  Dear Sir.

  I need urgent help! my laptop says that it has detected an imminent failure, although it has not yet been 6 months since I bought it. I ran the diagnostic of the system for

  system and apparent components requested by the system. the SMART test but the test drive 1, failed.

  Failure ID is: RU76X3-6RG733-MFPWXF-61UB03.

  Product no.: F2C07PA #ACJ

  I got my data saved, in case things go worse and I am trying to defragment the hard drive. but he's going to buy me some time.

  can I please know, if there is any way I can get things to normal without spending money (more indifferent). and if 'no' then how much it would cost me to get a new hard drive...

  thanking you in anticipation.

  Contact HP.

  As long as your laptop is under warranty you will be provided with a free of charge replacement hard drive. Have an active warranty is a good thing.

  You will need the recovery media that you have already created to find your laptop to the State, it was delivered at once you install the HDD replacement.

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Tecra Z50 - mSATA SDS + 2.5 "HDD?

  Hallo!

  I've seen in a Youtube video, that the SSD that come as standard are mSATA those and that there is space for a 2.5 drive "under.

  So my question is: if I buy a Toshiba Tecra Z50-A-12R, which comes with a 500 GB HARD drive, can I install an additional mSATA SSD as my system disk and using the 500 GB HARD drive as a second drive?

  Thank you
  Martin

  Well, some models are equipped with an mSATA Solid State Drive (SSD) instead of one
  hard disk drive. The computer seems to supports a 128 GB and 512 GB disk SSD 256Go

  but as far as I know there is only a single SATA controller to connect a HARD drive or SSD.
  The mSATA SSD drive is connected to the controller using mSATA HOLDER ASSY.

  So this cpl carrier is necessary if you want to use an mSATA SSD.
  Of course, you n t need if you use common disk 2.5 SSD or HDD 2.5

• Equium A210-17I do not start - how to access password protected HDD?

  My Equium A210-17I (model: PSAFJE) died recently and I'm trying to recover the contents of the hard drive.

  I hope that I can just put the drive into another laptop and start (either by using the player itself or a Live CD). Unfortunately, when I put the drive in another machine, it prompts me for a password HDD/SSD but say that the password is incorrect.

  Anyone have any ideas? The Equium stores a version coded the password or something?

  Any help would be appreciated.

  What I've tried so far:

  1 put the drive in Toshiba Satellite C655. Request password and after 3 wrong attempts to stop.

  2. put the disc into the Compaq 610. Request of password and after 2 attempts to let me Live CD boot. However, once started, the drive is not visible at all (disabled by BIOS).

  3. with all the variations of portable password input - completed by zeros, dashes, spaces, etc.. Uppercase, backward, etc..

  In what concerns the attempts to revive the satellite (so I can remove the hard drive password):

  When it is plugged in, power and load front lights.
  When lit, the logo turns on, the fan turns and can also hear the hard drive.
  Then there's just in this State.
  No display, no beeps, no lights on the keyboard.

  Tried to start after removing the hard drive and CD-ROM drive. Also tried without the installed memory. All the same result.

  Thanks for your help.

  > Unfortunately, when I put the drive in another machine, it prompts me for a password HDD/SSD but say that the password is incorrect.

  It seems that the HARD drive has been guaranteed by a HARD drive password.
  Mate sorry but this password cannot be deleted if you n t know the password.

  Usually to remove the HARD drive password, you must put the HARD drive in the Toshiba laptop, have access the BIOS and there is an option called HARD drive password which allows you to remove the HARD drive KNOWN password.

• Satellite Pro S300 EZ1514 - could not initialize Solid State Drive (SSD)

  I have a Satellite Pro S300 EZ1514.

  Recently I bought a SATA II 64 GB SSD to replace hard drive current cavalry. I first tried to install XP with SATA drivers rationalized in.
  The installation process recognized the SSD and has the original file copied to it, but when it restarted to continue the installation process the system wouldn't boot from the drive.

  Then I tried to install Vista Business 64 from the recovery disk came with the laptop.
  After launching the recovery disc, the said installation process the hard drive has not been initialized and click OK to initialize now.
  After clicking OK to initialize the system not restarted that at the end pointing upwards on the screen telling me to initialize the hard disk.

  Then I tried initializing the disk manually on my desk.
  Plugged into my office, initialized and formatted in NTFS. Plugged into the laptop to retry recovery Vista. And once again the same screen appears. Reconnect the disk SSD the Office to see that the player has is more initialized and was to be initialized again.

  Then I gave up and installed the SSD on my desktop under master boot and installed perfectly fine with XP. For testing purposes I then handed the ssd with XP pre-installed in the cell to see what happens. To my dismay the computer laptop would not boot and on top of that when I put the SSD drive in the desktop only to see that the drive has been initialized is no longer and I had to reinstall XP again.

  Conclusion:
  It seems that the Satellite Pro S300 series is not easy SSD and just post it self off Initialise the Solid State Drives.
  This seems to be the logical conclusion that the SSDS works perfectly well on my desktop and the laptop is fine now with the old turntable hard back in.

  Does anyone else have this problem or a solution?
  I would still put the SSD in my laptop to save energy.

  Hello

  The laptop is equipped with common serial ATA HDD.
  The SSD might work, but is not a must.

  There are several different SSD on the market and a problem of compatibility of equipment can always happen.
  Maybe an other SSD would work properly, but these are just suggestions.

• The maximum size of the HDD in Portege A100

  My hard drive 40 Gb in my Portege A100 age of 3 years. just died. I was wondering how big a hard drive to buy while it will be recognized by the BIOS?

  Someone in the internet used a 60 GB HARD drive in the Portege A100 and it worked.
  Maybe a 80 GB is possible, but there is no statement official on the size of HDD supported and compatible.

  The best way is to test different sizes with a distributor of HARD drive.
  Thanks for posting a comment after the HARD drive test

• Is possible to use the second HDD in PPM81E Portege M800-105

  Hello!

  Does anyone know, if it is possible to extend a Portege M800 - 105 model No. PPM81E with a second HDD?
  Is there a MediaBay for the DVD player to install a second hard drive?

  My goal is to use a Solid State Disk (64GByte) as the first disc (System only) and store all user data on the second drive.

  Best regards
  Sven

  Hello

  To my knowledge it is not possible to use a second HDD Portege M800.

  The laptop supports eSATA connection so you can connect an external HARD drive.

  Welcome them

• HDD SMART Check: FAILURE

  I have a HP Envy 15 JL - 073 cL (Win8.1) and I had not used for a few days, and when I turn it on it says hard drive failure and I should back up. Here's what he said:
  
  "Processor Check: PAST.
  HDD SMART Check: FAILURE
  
  FAILURE ID: GK5L3D-74E767-RXGJWK-609903
  PRODUCT ID: E0M39UAR #ABA
  
  Hard drive 1
  
  ————————————————————
  
  "The comprehensive system test: FAILED.
  
  I have already restored it once due to an error, why twice? Is there another way?

  Hello

  Error code 24 characters of the disk failure short Self Test would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Satellite A200-1VD: problem with HDD disk

  Hi friends;

  I'm sorry for my bad English:

  I have a problem with my * satellite A200-1VD *, I had with Vista Home edition 2 years ago license. I want to format it, * but I don't have a DVD restore disk * ([http://img96.imageshack.us/img96/5339/discv.jpg]). For this reason, I installed "* TOSHIBA Recovery Disc Creator *" ([http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]), but when I run it, * it does not recognize the HDD * and sent me the following message; ([http://img139.imageshack.us/img139/4445/resultattrdc.jpg]). in the second time, I installed "* Recovery Disc Creator *" ([http://img199.imageshack.us/img199/3197/rdcm.jpg]), but it does not recognize the drive too and sent me this message. ([http://img199.imageshack.us/img199/995/rttrcd.jpg]). I do not know how to this problem that * bothers me too well *. Too I would be grateful if you can help me to overcome this problem.

  Don't forget to see the following pictures to understand my problem.

  * - [http://img96.imageshack.us/img96/5339/discv.jpg]
  * - [http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]
  * - [http://img139.imageshack.us/img139/4445/resultattrdc.jpg]
  * - [http://img199.imageshack.us/img199/3197/rdcm.jpg]
  * - [http://img199.imageshack.us/img199/995/rttrcd.jpg]

  Thank you very much

  Hello

  At first was a little bit the theory for a better understanding.

  In the latest Toshiba delivered recovery facilities DVD discs with all the new models of laptops. "" Since then, I think, two or three drives of years facilities are not part of the package and recovery image is saved on the HARD disk and the recovery disc can be created using preinstalled "Toshiba Recovery Disc Creator. This recovery image is not saved on a separate recovery partition but on the second partition of HARD drive (data partition E) in the folder called HDDRecovery.
  The screenshot on 1.5 GB WinRE partition has therefore nothing to do with the Toshiba recovery image.

  This creation of recovery operation may work with the factory only settings. with other words, if you change the partition structure, or if you deleted this folder HDDRecovery you won't be able to create the recovery disk or install the operating system using HARD drive recovery option.

  I guess that you do not have this folder HDDRecovery more and because of this, Toshiba Recovery Disc Creator starts with error message. This tool needs direct access to these data recovery to create the drive recovery facilities.

  I think all this bother you much, but it's your fault. Reminder with the trace message is preinstalled on each Toshiba notebook with HDD recovery:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

  What you can do now is to order the new original facilities Toshiba drive under https://backupmedia.toshiba.eu/landing.aspx or you can use the Microsoft installation for the installation of the OS disc. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  If you have any other questions please let us know.

  Bye and good luck.

• Installing the program on HDD internal 2 on the Satellite A200 - 28 p

  Hello world

  Can someone help me? My pc has 3 discs apparently (this is a Satellite A200 - 28 p) and when I do a disk defragment it says that there are 3 a windows and c and d. Now, my query is can I install programs on the d drive I have recovery discs so guess that means that this drive is empty, as says that there 91.5 GB free of 91.6 Go.

  Does that mean so I can install programs on there, as have a print program of photo that is large enough and would be helpful if could install and a few other programs that use everyday, but like here when needed, on this other drive leaving my C drive for my Sims 2 games stuff and the stuff of Vista by default so that was a great help here before asking if everyone help me out my technical skills are basically could :-(zéro

  But I'm willing to learn, and as it says this laptop comes with a think that means 120 GB HDD can use either but I wanted to check before tried anything that either don't want to take the risk of ruin if it's a recovery drive and not a single one of my personal programs.

  Thank you so much to anyone who can help me with this question that wish had more technical knowledge.

  Debbie (Simreaper)

  Hi Debbie,.

  I don't know what you mean to have three readers, it is indeed very strange for display in the Defragmenter, so for now will be only concerns on your C and D drives only (which should be fine). you said you have the recovery disc for the computer, in which case do not any space on the drives reserved for recovery (as in the case of some laptops Toshiba-no).

  I would recommend only for purposes of recovery, to make a backup of all important data and settings on a separate DVD a regular and make sure that you have a factory DVD Toshiba-state recovery (i.e. one that is in the box when you bought the computer), or one that Toshiba has prompted you to do it yourself. You can also use software such as Acronis to create an easy to maintain the recovery point. I recommend you stick with a recovery DVD and a backup of all your work and folders however to get a clean install/recovery.

  In terms of where to install your photo program/sims2 game, it is to you. As C is the primary drive the primary partition has the best performance on drives C and D. This is why I recommend to leave all your files of program out there and let the D drive for files/applications/games that you do not use as much. You could integrate the storage space of drives C and D in C only, but it's a little too complicated to explain here.

  I hope this helps.