MAC CC 2015 only in trial Mode. Will not identify account.

Similar Questions

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Satellite A135-S2356 - BIOS will not identify SATA hard

  Hello everyone, hope you can help out me.

  Got a Satellite A135-2356 opportunity, everything seems fine but BIOS will not identify SATA HDD, shows no disk BIOS downgraded to 1.30, not good, upgraded to 1.40, not good. BIOS has no change/test/detection of HDD/SATA settings options. Tested the drive in another laptop and it reads very well. Received the Toshiba (Vista Basic 32) recovery CD, but given that the BIOS will not read the disk, can't do anything. Cleaned contacts, not good. This HARD disk must be too large, or something for the Board of Directors.

  * Hitachi HTS541612J9SA00 120 GB SATA, 5400 RPM *.

  Thanks for the help!

  Hello Richie

  To be honest, I do not think the disc is too big for your laptop. I can imagine that your laptop can handle with drives of 160 GB too. Unfortunately there is no public document on the possibilities of HARD drive upgrade. I can imagine that ASP in your country has information about such things.

  It's also quite strange that HDD is not recognized correctly. Long ago, I had the same problem. Every time when I used F12 at startup disk HARD were not as boot device. Solution in my case was to upgrade the BIOS to the default settings. I believe that your BIOS has already the default settings, but try to do it again.

• HP Photosmart Prem 310a went offline suddenly and will not identify the SSID to run the Network Setup Wizard.

  All of a sudden the printer has gone offline a few days ago.  Went through all the diagnostics, etc. but nothing fixed.  A solution-Assistant will not work cause it will not identify the SSID of the network that he has done since it was installed (long ago).  Have tried everything I can find online, unless I don't understand or is not quite apply and still nothing.  Wireless network works with everything except the printer. I am not very computer so I do not understand most of the letter & numbers abbreviations used here.  Help.

  It may be a heat problem - radio from the printer gets flakey when it's hot.

  Finding 5 wireless networks should - Yes you have one, but your neighbors also have.

• Illustrator for Mac trial CC will not start

  I downloaded and installed the trial version of the CC for Mac Illustrator. When I try to launch it. the icon flashes for a few seconds, then disappears. The application will not start.

  Install fonts Verdana and Tahoma from Microsoft.

  Mylenium

• Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

  Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

  Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

  Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

  I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

  I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

  I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• Will only mirror 2 views will not extend poster in 10.10.5

  I have the latest Mac Air with 2 monitors of Garland of Dell U2414H. It reflects only every monitor that is pretty useless. It will not extend the poster. The Layout tab shows also the 2 monitors of different sizes when the settings are the same for each.

  The worst part is that they will reflect only when I chose to expand.

  

  Same situation with my MBA from 2015.  I have 2 screens Dell U2414, two who supported the MST and DP 1.2

  I can't get their mirror, they won't have the Garland.  I also tried to connect to my MBP 2014 with the same result. The only way I could extend the poster was to connect each monitor port thunderbolt/display on my MBP. Of course, it won't work with my MBA because there is only a single port TB.  I know the only other autour work would be to run a display on the port of TB and another a USB port with an adapter, which, in my opinion, is a terrible solution there is a USB port and not a mess on my desk.  Everything I've read, this is a limitation of Mac OS X, not a hardware problem. I run Parallels with a Windows VM on my MBA and he sees both displays fine with wreath using the port of TB on my MBA.  What gives Apple? Why intentionally block monitors third-party DP working with OS X?  Frustrating.  The other frustrating thing is that there is no work around what I see-

• The trial version will not let me create a PDF file

  I am trying to create a file of cover of book in PDF format. I created the file in Photoshop, but the 'Save AS PDF' function does not create the type of PDF that I need for the publication of a book through IngramSpark. So I downloaded the trial version of Acrobat Pro DC. It will not open a file I have Photoshop Save as PDF. When I save as a Jpeg, it takes me to the subscription, purchase of the page online. Only, I downloaded the demo yesterday, so I should rest 29 days. Help, please. Thank you!

  1 ok, that makes sense. Yes, you can use the preflight in Acrobat Pro to make this conversion.

  2. the sounds as if something went wrong to make the PDF if Acrobat is not yet open. For example, this can happen if you click on save to JPEG, but type .pdf on the name. Am not saying that it happened, but it's an example. Can describe you step by step how you save the PDF of Photoshop, including the choice of that you pull down. Still, sounds as if you may have fixed this.

  3. the two apps: Acrobat Reader - and - Acrobat Pro. It is a potential mine field. Make sure that you recognize that you are running.

• Computer HP laptop-15-f162dx (POWER: Standby Mode will not Wake-Up)

  I put the switches so that the computer does not turn off and Sleep Mode for 15 minutes.  However, the computer go to sleep after 30 minutes and will not wake up!  I have to restart the computer everytime I want to work on that.  It is significant in the end pain when I need to leave for half an hour when I'm working on something.

  Charlie

  Hey @CARnPAR,

  I have recommended to you to return Windows 8.1 Notebook, as if updates have not been completed before the upgrade, this could cause problems. The marked Windows 10 upgrade update. No HP upgrade.

  You will need to return the option balanced diet plan options if it's high performance, it didn't wake up from sleep mode.  Here is a link on the mode "Eve" of issues.

  If this is insufficient, please use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Open the link: www.hp.com/contacthp/ follow the prompts
  Enter the product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately. Thank you.

• X 220 T: screen used to turn Tablet & FN + F3 after switching to the Mode will not work

  Dear community,

  as I have already mentioned in the thread title, my screen will not turn after the passage in Tablet Mode. Also FN + F3 does not either. System update shows no other edits, but he seems to be in any case, tapped since im sure that it has not installed the tablet button driver.

  I have a sweet Version of installed Windows 7, and before I start installing drivers hurt over and over again, im invite you you guys for help. Maybe you can tell me which driver I'm missing.

  All the best,

  Nik

  Installed all the drivers of the matrix-driver manually, looks like it worked. System update however was the shit...

• Updated for mac os x 10.10 now bridge will not download files from my camera

  Updated for mac os x 10.10 now the bridge will not download files from my camera, need help

  Hi rubincz,

  Could you please conform if you have updated to MAC OS X 10.11 or 10.10?

  If this is the latest version of Mac. Please refer Bridge and El Capitan

  Kind regards

  Assani

• Trial version will not convert to cloud

  my software (previously used in trial mode) photoshop request a serial number to continue.  Note the software not used in the trial version is fine.  I uninstalled photoshop and tried to download to the cloud with no luck.  I joined a few days - should I wait instuctions more Adobe?

  Just follow the following steps:

  1. Locate the hosts file.

  2. click on start, run, type "% systemroot % \system32\drivers\etc" and

  and then click OK.

  3. right click on the file * which file he showed there much * and select

  Opened. Select application Notepad open the hosts file * is

  What is called the file? I've not seen it.*

  4. save a backup of the file. Choose file > save as file name

  hosts. Backup and click OK.

  5. search for all entries that refer to activate.adobe.com and remove

  These entries. For example, 127.0.0.1 activate.adobe.com and delete this

  entry.

  6. save the file and close it.

  See you soon

  -LP

• trial version will not run before the splash screen

  I hope someone can help please!
  I downloaded the demo of dreamweaver 8 yesterday and I installed and ran fine. Today, that he will not run in front of the start screen. He stands up and asks if I want to buy or wear on the trial--I take trials and the dreamweaver start screen 8 arrives, and then nothing happens. The program does not start. I uninstalled and reinstalled. I rebooted etc - still no go. The other trial, I downloaded (firestarter) works very well yet.
  I am running windows XP media center edition service pack 2.
  Can anyone help please?

  Yes - it ran fine yesterday.
  I think I found the answer. I searched through the posts here & found someone else with the same question a few months ago.
  For anyone who needs to fix - check out this link - read to the bottom where he talks about problems. I ran the updater.2 and it seems to work OK now.
  http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=a3f38dcf
  Thanks for the reply though.

• This is a repair permissions. WARNING SUID File System/Library/Core Service/Remote Management/ARDAgent.app/Contents/Mac OS/ARDAgent has been modified and will not be repaired

  I ran repair permissions in disk utility. the latest information that printed was, (warning SUID FileSystem/library /CoreService /RemoteManagement /Contents /MacOS /ARDAgent ARDAgent.App) has been modified and will not be repaired. This warns something that I really need to worry. Also, how can it be fixed

  Don't worry about this.

  Utility disk - permission errors, you can ignore

• XPS 8300 will not identify data reader 5 to

  I have a desktop computer XPS 8300, Windows 7/64, 12 GB of RAM. Boot drive is a 500 GB SSD, and there is a SATA 2 TB of data. I'm a photographer, so I need a lot of data storage.

  I just bought a Toshiba MD04ACA500 5 to to use as a data drive (NO boot).

  My XPS 8300 can see the drive, but insists on the fact that it contains only 500 GB of storage, not 5 TB. I did the following:

  • Run Diskpart from a DOS window.
  • Run Diskmgmt.msc;
  • Run the tool to partition a third party
  • Also, I went through Windows KB 2581408 procedure of adding a player of great size.

  No matter what I do, the drive is detected as only 500 GB.

  The XPS 8300 is possible to work with a 5 TB drive? If so, how?

  Thank you, Ed

  Disks over 2 TB software needed to work with disks of large capacity and NEED 64 Bit Windows.  INTEL RST integrated in win7 is 8.x, which means that he WILL NOT see large capacity disks. Seagate manage it with the driver and utilities.

  • 2 t of learning beyond
  • Interactive Guide for disks more larger-Than - 2 TB

  http://www.Seagate.com/support/downloads/beyond-2TB/

  INTEL RST 10.1 at least is NECESSARY for advanced format drives.

  With windows vista or 7 install ATA mode then the microsoft patch is necessary before moving on to the AHCI.

  https://support.Microsoft.com/en-us/KB/922976

  Once passed to Ahci and work, you install the version of the RST that works for your model.

  Latest and most recent versions of the decline of the RST support more older chipsets.

  The latest 15 13 or 14 or 11 or 12 may not work.

  Before 9.x, it was called MSM (Matrix Storage Manager)

  It changed of MSM to RST in the 9.x versions.

  10.1 or greater is required for the GPT partitions greater than 2 TB.

  9.6 or higher is required for larger than 120 Gig aka advanced format drives.

  V9.6 driver Intel Rapid Storage Technology (RST) and above.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-031502.htm
  http://www.Intel.com/p/en_US/support/highlights/chpsts/IMSM

  9.6.0.1014

  https://Downloadcenter.Intel.com/download/15251

  10.1.0.1008 is the version of transition.

  https://Downloadcenter.Intel.com/download/20104

  10.6.0.1022

  https://Downloadcenter.Intel.com/download/20707

  11.0.0.1032

  https://Downloadcenter.Intel.com/download/20868