MacBook 2015; logo of start-up after connecting.
Tried searching everywhere, but without success.
I stop my Macbook while it was plugged into an external monitor a few days ago. Since then, whenever I try to log in, it accepts my password, shows the photo of profile for a few seconds, then goes to apple boot logo. It remains on the screen until what turned off.
After power turned off, I have to reset the SMC to get it to power back on. The same problem occurs after that.
I'm about to re - install the operating system, but I wanted to check if anyone knows a more simple solution.
Thanks in advance.
Well, problem solved. Started in recovery and ran a repair and that seems to have done the trick.
Tags: Notebooks
Similar Questions
-
My macbook pro could not start even after various combinations of keys
After referring upgrade to the macbook pro mid 2011 for OS X 10.11.15, I have to do a lot to restart, as well as the different key combinations in order to get mac (even that becomes difficult to solve the problem now!) I tried the diet, Ctrl + R, Shift + Ctrl + S, Shift + Ctrl + R + P, etc.. Although this may work from time to time, I am particularly concerned when I do school work timely.
What is responsible for this and how can it be solved?
When your Mac "not getting", what exactly do? What told you it does not work properly?
-
LR CC (2015) does not start after downloading via CC
Hello
LR CC (2015) does not start after downloading through the creative cloud, no error message, just after a fraction of a second.
My LR 5.7.1 legacy. installation is not any problems. I use Windows 8.1, Nvidia GTX960, 32 GB of RAM
Apparently, I'm not the only one affected.
Try to connect to the application office and back in: connect, disconnect you and | Creative desktop application Cloud
-
How to connect 12 '' MacBook (2015) to a 24 "or 27" Apple Cinema Display AND fresh!
I made this post on my site here: https://underground.net/how-to-connect-an-apple-display-to-a-usb-c-macbook/ (which I will update regularly)
This installation took me a LONG time to understand, but it works very well, no wake mode 'sleep', etc.
To connect the new MacBook to a 24″ Cinema Display or Apple 27″ LED Display Monitor (who both have a record which is the same as the Thunderbolt connector, but are not actually screens Thunderbolt) you can opt for a really cheap option, as the following point 3.1 AllSmartLife USB Type C adapter Mini DisplayPort Amazon for $ 20 :
That works very well, but you cannot load your computer when you are connected to the screen, nor can you plug something else on your computer as an external hard drive, etc.
To be able to recharge your computer AND connect to the screen AND connect other devices to your MacBook, you need the following configuration, and it works great, btw.
1 first download this USB-C for USB multi-port, Belinda® USB-C for 3 ports USB 3.0 , which is about $ 36 on Amazon.
2 then, you need an expensive element, StarTech.com USB 3.0 to DisplayPort 2560 x 1600 video card Multi monitor external adapter (USB32DPPRO), which is around $74 on Amazon:
3 Finally you need a cheap item, the Cable questions DisplayPort / Mini DisplayPort male to female adapter at $ 9 on Amazon:
Plug all the in such things and he ends up you look pretty clean where it connects to the computer, as you can see below and you can plug in the USB port of the screen on the hub and use the speakers on the screen, AND you still an available for a hard drive, external USB 3.0 port.
It will cost you around $119! Wow, that's a LOT, but it works. Or you can go cheap and just get the first card for $20 but charge your MacBook by disconnecting from time to time to plug in the charger. What a PAIN in the * Apple.
The new MacBooks coming will be equipped with a combined USB/Thunderbolt-c plug that should * hope * connect a screen and charge at the same time cheaper, but who knows?
If you want me to your post something, I can put it on the MacBook 2015 using forum boards.
-
Hi, I have a macbook pro retina 15 "(mid-2015) and I would like to connect it to my I-mac to use as monitor." The i - mac is 2009 and a not a port Thunderbolt... wouldn't I need a love at male Cable DVI?
Any help / advice would be much appreciated... Thank you!
Your iMac has minidisplay port? Here are the conditions:
https://support.Apple.com/en-us/HT204592
Ciao.
-
Original title: most of the programs have disappeared from the start menu.
Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.
Help please
Hello
Please see below for a possible solution:
Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
-
Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite
After you download the last updated September 27, lightroom does not start on my mac.
Used to work without problems so far.
Tried to disconnect the last clouds and again without success.
Thanks, that worked.
Now, I have to do the update again hope that will work as well...
Do you have any idea what caused the problem?
Concerning
Christian
MIT thank wurde
Hans Christian Behrendt
2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:
Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates
by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop
Lightroom *-see complete discussion
-
starts automatically after a power failure
Hello, I use a Macbook pro 8.1 13 "(A1278)"
I need 'start automatically after a power failure' work as below
Bun, my macbook can't activate this function. I can't find the same box. Check the screenshot below.
I'm looking for the options "start automatically after a power failure".
This feature appears to be available only for the Mac desktop.
-
Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?
Thank you
Any ideas if it can be fixed or if it's as I read elsewhere dead now?
He died... the fact that the main witness turns off is unusual in this model.
It is common to the next... A1409 (gen4)
What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...
If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.
I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.
I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.
If you want to play, I'm happy to help you... but I would not spend money on it.
-
In early 2011, MacBook Pro won't start
In early 2011, MacBook Pro won't start
Is-ti connected? Fully charged?
Give us some facts!
-
Laptop started having problems connecting to internet connections Wi - Fi
in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.
Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.
Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.
Thanks in advance
> in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings. -
Unusable slow of the macbook pro at the start of the internal drive
Hello
A couple of days my macbook pro (mid 2012 13 inches) has become unusably slow. Nothing doing, even just by clicking on the desktop would give the minutes of spinning beach ball.
To troubleshoot I tried the following:
Safe mode: same questions, constant beach ball
Apple Hardware Test (extended test): no found error.
Booted in single user mode and drive repaired using fsck: I got the message 'volume (name) seems to be OK. "
Finally, I started again in mac os x and the console have pulled up to see if I could find something.
I found an online "localhost kernel [0]: disk0s2: i/o error." at the same time my problems began. Due to this I thought that my drive was dying.
After installing a new disk and hang the old an external, I decided to start just to see what would become of the former.
To my dismay, it worked perfectly, smooth as butter and no rotation beach ball.
So I think that's not the drive that is at fault.
What else could be the problem and how would approach I find it.
Thank you
Alex
I have the same problem on my Macbook Pro, which also runs on OS X Yosemite. and is the same model.
It starts very well I can access my files for about 2 minutes and then it freezes and slows down just. This is for me the wheel of death of Rainbow forever, regardless of how long I left my Macbook on the race. I have nothing to cause this problem, he slowed down just in itself, but I can still access my files
I tried to search for this problem on the internet, but there is no help for this issue at all or not so much information about it.
Docking station opens, but Rainbow wheel does not disappear and the freeze continues.
I tried both SCM and reset the PRAM, but that did nothing.
Can someone help us? I would like it to go faster still.
* UPDATE *.
He seemed to have solved my problem!I left my Macbook to run while loading slowly after sign in about 20 minutes. Then all of a sudden the Finder came back and it seems to work fine... for now... give that a try.
-
Satellite A100 PSAA2E Setup hangs after connecting new HARD drive
Hello
I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
I can't boot the CD of form (I can't select same drive to start by pressing F12)It just hangs.
When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.
I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.
HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).
You have no idea where could be the problem?
Should I format hard drive in a different way?BR,
hosss
Hello
Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.
A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.
Good bye
-
Touchpad on my Satellite L50D-B stops working after connecting
Hello
I bought L50D-B 12/2014, 2 days ago, it started.
After I login I have the touchpad work although all commissioning, but once the start finished it stops.I use a bluetooth mouse, but have used same mouse since I bought the laptop, the printer, the same wifi connection. Same Antivirus software.
The only thing I can think of that changed is that I removed Norton trial for backup software remotely.
Any ideas.
Thank you :-)
Hello
Touch pad can be turned on and off using the FN + F5.
Have you checked this feature in the past?In addition, you can try to uninstall the touchpad driver (Control Panel? programs and features)
Here, you should see the momentum or Synaptics touchpad driver.After you have uninstalled the driver for the touchpad, visit the Toshiba UE driver page, and then download and reinstall the driver from the touchpad still. Reboot the laptop and test if it helped to solve your problem
-
My PC starts immediately after stopping off for a considerable time
My new PC will not start immediately after the power supply is cut off for several hours. However, it starts up after several minutes of trying. Is this a problem related to the power supply or other materials? I assembled just this new pc, and before that, it never happened. Here are the specs of my pc:
GX650 Bronze PSU CoolerMaster; Processor Intel i5 2320; Intel DH67CL mobo. 6750 2 GB DDR3 graphics card Sapphire; 2 x 4 GB Corsair RAM; Kingston 64 GB SSD; WD 1 TB HARD drive; ASUS DVDRWMy PC is connected to the mains through an inverter 600w APC.Is it possible that it could also because of the connection of power supply of the pc case itself? For the record, the case is an old one that has experienced a recent surge that destroyed my previous mobo and basically almost everything in it.Hi wannmann
These forums focus on Microsoft software.
Your best resource for the problem you describe would be the motherboard support forums. Here is a link for your convenience.
Support of Intel communities:
http://communities.Intel.com/Community/TechConcerning
Maybe you are looking for
-
Aggravated with the update from my iPhone It is a list of the problems I have with my iPhone 6plus since updating to IOS 9.3.5. A single date after update my touch screen froze and I was unable to trouble or to use until the battery died and the phon
-
Sorry if this is long and wordy brief summary of the problem: the other day, computer laptop of my son died when he was in the middle of something, the blue screen of death and it wouldn't turn on. I checked the hard drive in the BIOS setting and it
-
Four days ago, that some of the emails in my Inbox deleted.
I use MSN Premium for Verizon for my e-mail service. Four days ago some (about half) of the deleted emails in my Inbox. They are still on the list, but does not open in the preview pane and when you try to open the subject line becomes (not applicabl
-
He had to find bag for Canon Flash 600 EX - RT flsh unit
I have my backpack from Tamrac Expedition 7 x and the Tamrac Velocity 7 x cross body bag. I'm trying to find an external flash Pocket that fits my 600 Speedlight EX - RT external flash, which I got on eBay for a fraction of the price of Adorama and
-
How to import an avi windows movie maker video
I have a Nikon Coolpix L22 and it supports .avi files, and when I tried to import it into windows movie maker, it wouldn't support it