MacBook Pro won't print on Officejet4215 after reinstallation of software! Help!

Similar Questions

• In early 2011, MacBook Pro won't start

  In early 2011, MacBook Pro won't start

  Is-ti connected? Fully charged?

  Give us some facts!

• Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Hi janeslens,

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.
  • Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom

  Let me know if it helps.

  Kind regards

  Tanuj

• I have elements 9 Prime Minister, now have the new macbook pro with no disk drive, can I download the software?

  I have elements 9 Prime Minister. I now have the new macbook pro with no disk drive. can I download the software on the net, carry serial numbers?

  Hi Annie p.

  Please use the link below to download first elements 9

  http://prodesigntools.com/Photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Please be sure to complete the section very important before you click on the download link.

  Thank you

• My Macbook Pro won't let me put my password, after it has been locked in icloud

  Hello.

  I have a Macbook pro to the end of 2013. I locked using icloud with a four-digit code. I forgot the code and had several attempts trying to remember her and now I think I found it, but it won't let me put the code in another attempt. the message on the screen says 'wrong password. try again"but there is nowhere for me to try again. someone can help me. I tried to start upward into recovery mode, but she still needs the code for it, and when I get it it takes me to the screen locked again.

  Hello

  You will need to contact Apple to unlock your Mac: https://getsupport.apple.com/?caller=psp & PRKEYS = PL104

• OfficeJet 8500 has 910: Macbook Pro won't find my Officejet Pro 8500 printer

  Until recently, my Officejet 8500 910 has worked very well with my Macbook Pro, desktop computer wireless Mac and iPad.  Now, it will not be printed with any of these devices. Yesterday, he worked with my iPad, but today it says that it cannot find the printer. On my Macbook and desktop computer, it is impossible to find the printer when I try to add.  You can find the scanner and fax part of my all-in-one, but not the printer. I deleted all my printers and tried to add this back.  I've stopped and restarted. I checked that my printer is connected.

  I have same thing happened with a HP wireless printer in the 8600 series to work.  Sometimes he would find and connect.  Other times, it wouldn't. I appreciate all help.  Thank you!

  Hey @Jeanne33,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8500 all-in-One Printer does not appear on your network. I can help you with that.

  1. As you only use Apple products means that the printer is no longer connected to your network or a parameter has been changed on your network. That being said, this is what we will do:
     Turn the printer off.
  2. While the printer is off, remove the power cord at the back of the router for a minute.
  3. When the lights came on the router, turn on the printer.
  4. Try to print.

  At this point if you are not able to print, then we will do the following:

  1. On the printer, click on Configuration, network and wireless view summary.
  2. If you see a line indicating connected the printer is properly connected to the network. If this is not the case, then, from the main screen, click on Configuration, network and wireless configuration wizard to add the printer to your network. Try once done printing.

  At this point, you should be able to print. If the printer still doesn't seem to add as a device for the Mac or appear on any other device and then you have a setting on the router that has changed. Your best option would be to communicate with the person who is provided with the router and ask them to do the following:

  • Open all ports.
  • Select multicast.
  • Disable MAC filtering/MAC cloning.
  • Disable the guest network
  • Make sure that the router has a band of 2.4 GHz.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• MacBook Pro C310 series printer issues. I already had my C310 installed on a PC.

  I uninstalled and installed on my macbook pro.  I can print a diagnostic page, but it won't let me print anything else.  It is said that here it does not connect - almost as if there are problems with the router which I know is not the issue, as I got it all working before and my internet connection works.

  Can you help me at all?

  OK, if the test shows that it is correctly connected to your wireless network (I think that's what you say), then you just need to tell your Mac is here:

  -In the Apple menu, go to System Preferences > print and fax

  -Click the '+' at the bottom of the printer list (or if you have no printer listed, at the bottom of the large white rectangle).

  -When it detects your printer (with Hello appearing next to it), click on it once, then click 'Add '.

  Now you should be able to print or scan from your C310!  To scan using the image transfer application in your Applications folder.

• Print Macbook Pro w/Lion to a HP C6180 wireless and software says not connected printer.

  I am able to scan from the c6180 using the Apple Preview software...   I have a G4 Pro w/leopard onMacbook - NO problems...  I also have an older w of 4 months of iMac/Lion - NO problem (Note: the HP software from an iMac G5 w / leopard.)  Later, I downloaded from HP.com the full suite of HP software... This works.   It still works after software update Apple provide an update of the hp software) I'm comtenplating migration of new Macbook Pro iMac to see if it works.

  I tried power down the printer and re-startup - still no go...   Any suggestions or workarounds?

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• New MacBook Pro does not print 2 sides on Photosmart 3210xi

  Signed ol ' HP for the new MacBook Pro with OS X 10.6.6 USB cable, and he finds the HP.  Then toured to update software to currently do.  One of the printer boxes display correctly the HP to be equipped with the print side 2 on the back module and checked, but it is not printing 2 sides.  This system has no solid range of choice than Win7 - what is with that?  Someone at - it a method to obtain this HP Print on both sides of the paper?

  Thank you

  Bill

  Hello HP,.

  I found the real solution, thanks to a bad hard drive on a new MacBook Pro, who died just before the spirits high at their altar in the Apple store here.  He was just 12 days old.  They gave me another new MacBook Pro.  While the implementation here at home and to have met with the Photosmart 3210xi he seemed to do ok, but again, it wouldn't make impression on side 2. And not after the MacBook made the update either.  So I tried the manual visit to HP - no help.  Unplug the printer and uninstalled the printed stuff.  Stop. Started and went to HP and downloaded the driver 10.3 me connected and turned on the printer when the installer wanted.  Printer worked and printed 2 sides.  The MacDonalds its software update and thinking, I saw something strange about one of the dialog boxes, all when trying to print after the update: 10.2 Driver. What?!  And no 2-sided, once again.  Fact the entire removal and install Driver 10.3 on but without having the MacBook again the software update. Now it prints 2-sided.  

  I'll tell Apple about it.

  In the meantime, it will help if HP would update what list you provide to Apple for their updates, which would help. Thank you!

• Sound is gone on my Macbook Pro. The icon is grey after trying to download a password security app Help!

  Sound is gone on my Macbook Pro. The sound icon went gray. This followed two downloads of password security applications and then deleted. The third I have kept and entered my password. If I go into the Time Machine to restore the system will delete the security of password I put in place after the last Time Machine backup?

  Thank you for your willingness to get out me of trouble!

  Hi Vincent,.

  I understand that you are no longer able to control the audio output on your Mac after installing a few different security applications. If you want to use Time Machine to back up or restore your Mac at one point before installing these applications, it is absolutely an option. However, keep in mind that this kind would remove, indeed, any changes made after the point of this backup, including installation and configuration of said software.

  Alternatively, you can consider having a look at the article in the link below for steps that can help to restore the functionality of audio output on your MacBook Pro.
  Troubleshooting for any audio speakers on Macs

  https://support.Apple.com/en-us/HT203186

  Sincerely.

• Trackpad MacBook Pro late 2011 does not not after upgrade

  I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

  Hello Med_,

  Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

  You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Reset the management system (SCM) controller on your Mac.

  If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  See you soon!

• MacBook Pro won't start not

  Hello

  I have a MacBook Pro that, if I'm not mistaken that I bought in 2009. So, last week I had several open files and I was typing on a Word document, I typed whenever he got more lag. Then my laptop just turned off automatically and I received a message (I don't remember very well what it read) and after that I tried to turn it on again, the start bar just loaded up to half, he stayed there for 10 minutes, then the computer is turned off again. Help, I can't lose the files that I had in this computer. What should I do?

  Thanks for your help.

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  If no success, using the original installation CD and see if you can start the MBP.

  If you can, after the language selection, the display should have a top menu bar.  Click on UTILITIES and select and run disk utility > first aid.  If the disk cannot be repaired, a new will be necessary.

  If you cannot start with the installation diskettes, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Mid-2015 MacBook Pro won't start every 2 weeks, need to restore from a backup.

  Hello all, big problem, Apple says that it is not material (although I'm not sure), but if not, then there must be some sort of conflict between my installed software and the new model of MacBook Pro mid-2015. Help!

  The problem here is that I've been running EXACTLY the same configuration on a MacBook Pro 2012 since, well, 2012, without any problem. But when I received the new machine in December, I migrated everything on (using Migration Assistant), I have installed a Bootcamp partition, migrated my old installation of Windows on the use of WinClone, and everything was fine for about 2 weeks. This is the same process as I did when I upgraded the machine from 2009 to 2012 also machine well.

  Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

  I called Apple, went to two Apple stores, and we all tried to run disk utility to fix the problem. But every time I find myself with a message "Invalid node structure. The volume could not be completely checked. File system check exit code 8. Updated scores of start-up of the volume as required. File system check or repair a failure. Operation failed... "The topic on this bed,"first aid process has failed, if possible, back up the data on this volume. »

  The idea of first re - install the operating system didn't work... apparently there was a problem with the volume at this point so he would not restore. The next option was to completely erase the partition and then restore the backup. That worked, but then the entire process repeated two weeks later.

  I have been through this process 7 ~ 8 times since December! It seems to happen every two weeks and no one can tell me why it's happening on this new machine, but I have NOT had the problem on the old machine running the same configuration.

  
  

  Apple said it might have something to do with execution Tuxera NTFS on Mac (if I can share documents across side Windows). I have not removed... Tuxera two restorations there is no change.

  I also use Paragon HFS + for Windows, because most of my material is actually stored on the Mac side. I have NOT yet removed this (current running Windows 10) because I have NO idea why or how something running on the Windows side could affect the operating system volume on the side of Mac... especially when everything I do is opening and closing things as Word documents.

  I have log files and screenshots (I write below a few... but there are many others). Apple says "it is not a hardware problem" so they won't have to help understand if it's just software. I beg the community to help!

  Here's what I new material:

  MacBook Pro (retina, 15 inch, mid-2015)

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  AMD Radeon R9 M370X 2048 MB

  This graphics card is the NEW one, first, that I do business with AMD

  My OLD machine is:

  MacBook Pro (15-inch, mid-2012)

  Intel Core i7 2.7 GHz

  16 GB 1600 MHz DDR3

  Intel HD Graphics 4000 1536 MB

  Any help or ideas are appreciated!

  

  Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

  This occurs when the drive Boot CAN get the initial Blob of the software off the drive with the boot loader, but when he tried to mount the disk with the file system, it can not be mounted. It runs a single past of [essential] disk first aid. If the drive cannot be mounted, your Mac can not do something useful, he died.

  If the problem could not be fixed quickly, you should have been advised to REPLACE this hard drive.

  This is what you need to do now and stop wasting your time. A new drive costs less than $ 100 and will solve your problems.

• MacBook Pro won't feed - need to disconnect/reconnect the battery.

  I have a 'early 2011' MacBook Pro 17 "which does not illuminate when the power switch is pressed.    He worked normally in the last time it was used.

  I'm a PC I / specialist t so I did some fault finding.  Here are the results and measures, I tried:

  1. Power button and no indication button has been pressed.
  2. Button on the side and he said fully charged battery.
  3. Adapter a/c and LED power connector attached LED lights up in green as it is supported.
  4. You press the power button - still no indication of any attempt to power on.
  5. Let Reset SMC pressing SHIFT, control, Option, and power switch.  All released.   You press the power button - still no indication of any attempt to power on.
  6. Power button which is held down for 15 seconds, released, then no hurry once - no change.
  7. Disconnected a/c power.
  8. Removed the back cover.
  9. Battery disconnected from the system board connector.
  10. Connected a/c adapter and power button pressed - no change.
  11. Disconnected the a/c adapter.
  12. Back in the connected battery system board connector.
  13. Joint a/c adapter and the system performed a reset, then IPL upward and ran normally.
  14. System "Shut down" and then press the power button - would not be back.
  15. Removed the a/c adapter and pressed the power button - still wouldn't back off.
  16. Disconnected a/c adapter, disconnected the battery, battery reconnected to the system board.  Power button - will not turn on.
  17. Repeat the procedure which worked previously - a/c offline, disconnected battery system board, connected a/c, press button power (no signs of activity), disconnected a/c, battery reconnected to the governing body of the system, reconnected a/c and it reset and power!
  18. Let system and then "reset" (instead of closing) - it restarts correctly.
  19. Shut down the system and then I tried to power - will not turn on.
  20. Bottom line: it seems that the procedure which will get the system starts, after it is closed: disconnected a/c, disconnecting the battery system board, connected a/c, press power button (no signs of activity), disconnected a/c, reconnected battery to the system board, reconnected a/c and it resets and starts.

  OK, so you MacBook Pro experts out there... what seems to be the problem and what measures would you recommend I take?

  THX,

  Jeff

  Hi Jeffrey,.

  Welcome to Apple Support communities.

  Looks like you did some troubleshooting while trying to solve the problem with your MacBook Pro turns is not on. The article below provides some additional troubleshooting steps that should help you further isolate and resolve service installation or question.

  If your Mac will not turn on - Apple Support

  See you soon.

• MacBook Pro won't start - runs in a loop

  Hi guys,.

  After a few days trying to figure this painful problem, I am at the end of my home and hope someone can help.

  I have a 2011 MacBook Pro, which has recently started having problems to start. During a game session (SIMMS), he all of a sudden to stop and refused to restart, and since then I have been unable to use it at all. The MBP has a new installation of El Capitan on it, but it has been working well for the past two weeks since the installation.

  I tried the safe mode, mode of recovery etc, but it would not boot in any of these either. Finally, I put it target mode and reloaded El Capitan of another 'companion' MacBook Pro. This process went smoothly.

  After loading it, I started from the MacBook to make sure that the operating system works OK, and it was 'companion '!

  I restarted the "Companion" MBP and ejected the defective MBP and tried to restart it normally. No go, would not even boot even with the new OS.

  I tried a number of things so he can begin as a result of this new facility, but all that happens is that he'll do the Apple Logo, try to start, stop, and then go around in circles.

  Finally you will stop on the gray screen and the fans will start and keep running.

  I'm at the end of my knowledge, so any advice would be welcome!

  Thank you

  Have you tried SMC and NVRAM resets?