Magic Mouse 2: open hole, no light

Similar Questions

• No installation of Magic Mouse 2 shows no green light when it is plugged

  I use an apple mouse and want sign out using a magic mouse 2.  When I plug it into my computer I have no green light

  Hi, lindafromcleveland!

  I'm really glad to hear you have a new Magic Mouse 2! It's a great device, and I know you will love. I understand you may have some trouble getting it implemented, however. I have some information that should help you.

  First of all, take a look on the article in the link below to ensure that your Mac meets the system requirements for using a Magic Mouse 2:

  Identify your wireless Apple keyboard or trackpad mouse

  Under the section "Identify your device and requirements", this information is provided to the Magic Mouse 2:

  Magic Mouse 2

  • Lightning connector, built-in battery
  • Requires OS X v10.11 or later version

  If you are not running OS X 10.11 (El Capitan) or later version, you will need to update your software OS X before being able to use the Magic Mouse 2. You can use the link below to help to update if you need to.

  Update the software on your Mac

  Once you are on OS X 10.11, you can use the following article to configure the mouse Magic 2.

  Configure your Apple wireless devices

  Have a great day.

• My MAC has ceased to recognize my Magic Mouse. What can I do to reset it because I can't open the MAC?

  • Include your product name: Apple iMac 21.5 inch Intel Core i5 processor: 2.5 GHz speed, 4 GB memory
  • MAC OS X
  • The problem: without warning my MAC not lonely can find or recognize the Magic mouse. I have no idea act caused it but I have other MACs and the Mouswe works fine on these machines.
  • Cannot quite pull because I can't access Mac.

  You may need to use a USB mouse temporarily in order to open the preferences of BT in order to re-pair the mouse with your Mac.

• Green flashing light on the Magic Mouse

  I thought that a green light flashing on the Magic Mouse 1 (not rechargeable), means that the necessary batteries replaced or recharged.  I put new batteries in, and yet the green light continues to blink.  This is a new mouse, sent to replace their defective Magic Mouse.  The defective mouse works, but I can't get the new one to work.  I can't get support to help me with this. I tried to use the conversation, and they have disconnected while I was writing my question. RRR

  Anthony,

  Look at my answer to the other thread.   It may be better to keep all questions here at the moment.   The other thread is no longer.

• Magic mouse - no lights?

  I just bought the magic mouse2 and I have an IMAC of 2012.

  I plugged in the cable of the lightning of the magic mouse and turned on (and it is plugged in a few hours) and theres still no light or anything?

  I updated my computer rebooted, used various lightning cables but nothing seems to make the charge of the mouse or light in anyway?  This mouse is defective?  I've never had problems connecting the touchpad or keyboard before.

  Thanks for any help

  You say that you have updated your system... what version do you have now.  (It should be 10.11.3 El Capitan)

  If you have an Apple store in the neighborhood, take it they test it on place and replace if necessary.

• No green light magic mouse 2

  Computer does not respond to the mouse.

  No green light when I turn on the mouse.

  Mm2 has no green light on this subject. Check if it's loaded. Use a USB mouse you can configure the MM2 to pair up with your computer using BlueTooth preferences. Be sure to slide the power switch on the market - you should see green on the slide.

  The keyboard has a very small and hard to spot, On / Off switch on the rear of the keyboard. Don't forget it's on.

• After the update of Sierra: not to Disable Trackpad with Magic Mouse connected

  Hello

  After that I updated to macOS Sierra on my MacBook Pro the Trackpad is not disable mouse connected with Magic.

  Feature: MacBook Pro retina 15 inches (end of 2014) on macOS Sierra.

  Since the update, I noticed that my stays compatible with my Magic Mouse connected after built-in trackpad window connection.

  In system-> accessibility-> mouse and Trackpad preferences, I have not "ignore the built-in trackpad when mouse or trackpad wireless is present". If I switch it off and on again once again, the parameter will be.

  However, once I lock the device (user name right-> connection... window) and reconnect, the trackpad works. You must pass the parameter each time.

  Is this a bug of Mac OS Sierra (can't find anything) or am I missing something? I am aware that the trackpad is reactivated at the login window, but before it will deactivate after logging in.

  I don't use Magic Mouse, but I have USB Wired mouse and I have the same problem since installing Sierra.

  I have the box ticked, but I must go and clear the check box and then save.

  I have to use a mouse all the time because my trackpad goes haywire and I wasn't able to find a solution for this. It moves its own and open stuff on its own.

• the magic Mouse loses connection

  I have an iMac 21.5 "running 10.11.6. Recently, I added a to an existing stereo system bluetooth connectivity so I could broadcast on the system. By the way since then I lose my connection to the mouse. I get "connection lost" notification even if the mouse is sitting idle without hands even near him. I tried the suggested pieces of paper, battery replacement and any other thing, I found displayed. Nothing works. As I was typing that I got the message several times, and I'm not even using the mouse! I have another computer in another location and plan to try to see if the problem changes switching. I suspected that the additional bluetooth device could be the culprit, but I tried to unplug and had the same results. It is not a problem with another computer running the same operating system, even if a year or two older hardware. The intermittent mouse problem existed before, but I've lived with him because he doesn't seem to be that bad. Now, I have moved and am in an apartment complex and wonder if there is an interference cause me pain. I do not know to replace the mouse by a non Apple device can solve the problem or if I need to use a WIRED one remedy! The keyboard has never given me problems and with the exception of the low battery notification, it has worked perfectly.

  Hello...

  May be corrupted Bluetooth preferences.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/com. Apple.Bluetooth.plist

  Click OK, and then place the com.apple.Bluetooth.plist file in the trash.

  Can it match the Magic Mouse > OS X El Capitan: use an Apple wireless mouse

  If this does not help, because you are having problems with the battery, Reset System Management Controller (SMC)

• To stop a Magic Mouse to work?

  I have an original Magic Mouse. It has new batteries, but clicking on it or by pressing the mouse does nothing. The green light doesn't Flash or lights. What he would do to stop working like this? Any ideas or suggestions would be very appreciated.

  Thank you.

  Batteries installed incorrectly, lack of battery charge come to mind

• Magic Mouse on Boot Camp 5.1 Windows 7

  I was on the last two hours of research on how to connect my Magic Mouse to Windows 7 via Boot Camp 5.1. Here is what I tried:

  By clicking the Bluetooth and the addition of the device. Biggest problem, the mouse doesn't even appear to be discovered (and yes the mouse is on and yes I turned it on after the opening of the add unit page).

  Also, I tried to manually install drivers Boot Camp 5 on Apple's site. I even tried the 3.1, which seems to work for everyone, except that since I am 5.1, it doesn't let me open the files.

  I even tried some third-party software, but no luck.

  I think that if I can get Windows 7 to recognize the device that I could install it, but it does not appear in my choices. I tested the Bluetooth Manager by seeing if he could see my iPhone, and he did. It is also safe to say that it connected fine on my OSX partition.

  Any help would be great! Thank you!

  Data sheet:

  MacBook Pro late 2011

  OSX El Capitan

  Boot Camp running under Windows 7 64-bit

  Magic Mouse 2, Magic Trackpad 2 and Magic Keyboard 2 have no drivers for W7. They are supported under OS X and W10.

• Last Magic Mouse 2 is not compatible with the Mavericks 10.95 - and that stinks

  It is not so much a question as an expression of stunned disappointment.  My old mouse Magic went kablooey, and so I got a new.  Unfortunately when I the paired with my MacPro 2012, running the Mavericks 10.95 (sorry Apple, you have not matched the Mavericks speed and performance with Yosemite and El Capitan) I discovered that features the touch like scrolling and swiping has not worked.

  After an hour to read the little booklet that comes with the mouse, zap the PRAM, reset the SMC and usually ask myself? *  I watched the Magic Mouse box and found the answer in 3 grey dots on white type: requires OS 10,11 or higher.  All right.  Mea culpa, caveat emptor, blah blah.  I should have read through the entire page of the Magic Mouse on the Apple Store Web site, but I already have the product so don't figure there were many new take into account.

  However, it seems strange to me that a completely necessary peripherals does not work with a BONE from a few years ago.

  There are loyal customers (30 years of computer science and I have never used or owned a PC) who use your products as professional (I'm a sales manager of creation) and, for reasons that go beyond taste, prefer your earlier and faster OS.  Apple wants to move the herd along for many understandable reasons.  I do advertising.  I get it.  Offers new features and the "improvements" that Miss on users who refuse to put up-to-date is perfectly logical.  But prevents them from having a functional Apple mouse goes too far.  It will encourage strong armament and it stinks.

  In light of Apple's strategy, it seems pretty ironic that the same company that once derided the PC world as thinkers authoritarian group straight out of Orwell is curve at this level to get its users to conform to his version of the future.  What the * happened to "Think Different"?

  Good question, I guess, and I can only opine; as you know, we are here just volunteers.

  The question is... when a company changes its products.   As I see it, different operating systems have developed over the years at a huge pace, such that cannot not could be foreseen four years ago.   So the Magic Mouse 1 was fine for the moment but did not have the ability to adapt to meet the current needs.     So what does Apple?   It must be a new mouse that will respond to current needs and anticipate the needs for some time in the future.

  You can still buy the old MM1, although you might have to go hunting.   And of course, you can take the old one back if it was purchased less than 14 days ago in most countries and 28 days ago in the United Kingdom and most European countries, I believe.

  I hope you get over your troubles.

• Suddenly, my magic mouse not, turn on even with new batteries.

  Magic mouse does not light

  Are the batteries installed correctly (polarity?) If Yes, then you may need a new mouse.

• Magic mouse does not work

  I just bought a new magic mouse. I am connected and it works well. My only problem is that does not scroll. I went into System Preferences and there are no options for scrolling. I've updated my OS X El Caption about a month ago so everything is up-to-date. Any suggestions?

  Maybe scrolling is disabled in the accessibility settings somehow?

  System Preferences > accessibility > mouse and Trackpad > mouse Options

  Make sure "Scrolling" is checked.

  Set the double-click and scrolling speed of your mouse or trackpad - Apple Support

  In addition, when you open System Preferences > mouse, does show options for your Magic Mouse mouse, or should we say no device found?

• Sensitivity of the magic mouse 2

  OS X 10.11.3 (15 d 21) model name: iMac model identifier: iMac14, 2 name of the processor: Intel Core i5

  I recently changed to a Magic Mouse 2 and it worked perfectly. Recently the sensitivity seems nave has increased as evidenced by the fact that I have to hover over a link to activate it. How to restore to original operation?

  Hi DCRIOW,

  If you want to adjust the settings of your Magic Mouse 2, take a look at the resource below to adjust the settings in system preferences.

  Using system preferences

  Preferences system systemic control ("global" settings) and is available in the Apple () menu in the upper-left corner of the screen. Preferences system allows you to set things like your resolution screen, keyboard, mouse, sound, taken the printer settings, settings, accounts and more sharing.

  Customize your mouse

  The preferences panel mouse look different depending on what type of mouse you are using. These settings allow you to set the mouse sensitivity to control how quickly the pointer moves on your screen when you move your mouse, and adjust your double-click reflexes. Other controls may be available, depending on the type of mouse you are using.

  

  1. In the Apple Menu, open system preferences.
  2. Choose View > mouse, or click on the mouse icon.
  3. To control the speed of the pointer (cursor) moves across your screen when you move the mouse, click on Point & click and use the tracking slider to adjust the speed.
  4. If double-click speed if poster, you can use the double-click slider to adjust the speed.
  5. To change the action settings, click the tab more moves. You can enable and disable the gestures for blow and the Mission control.

  Configure your Apple wireless devices

  Mouse Magic 2, Magic Keyboard, Magic Trackpad 2

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to USB cable to the port of lightning on the device and plug the other end of the cable to your Mac.
  2. Make sure the switch is in position I. (Green will be visible).
  3. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  4. The Bluetooth Preferences window shows the status and costs connecting your device. When the device is charged, unplug it for wireless use.

  Note: The Magic Mouse 2 unusable when you are connected to the cable.

  Take care

• I have most of the software UTD and the magic mouse 2.  I continue to have these episodes where Safari zoomed spontaneously and I can't cancel it without hitting the back button of the browser.  Did someone came across this?

  On an IMac 27 "OS is El Capitan 10.11.2 Magic Mouse 2, Safari 9.0.2

  Seen the episodes while in Safari, it suddenly zoomed in and let even me not to scroll the page.  I have to click on the back button to cancel it. It seems to happen spontaneously, but my hand is still physically on the mouse, just I don't do anything with or to the mouse.  Seems to be developed after I went to the Magic Mouse 2.  Any ideas?

  Please, open the mouse in system preferences and uncheck that smart zoom.