No green light magic mouse 2

Similar Questions

• Light Magic mouse to the back of the mouse flashes twice intermittently

  What is the problem with my mouse, not connecting, the bluetooth is on but located at the back of the mouse flashes 2 times and is consistent in that regard, but no link...

  Reset the PRAM and SMC.

  Barry

• Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing the batteries?

  Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?

  Simply indicates that the devices are on.

  Barry

• No installation of Magic Mouse 2 shows no green light when it is plugged

  I use an apple mouse and want sign out using a magic mouse 2.  When I plug it into my computer I have no green light

  Hi, lindafromcleveland!

  I'm really glad to hear you have a new Magic Mouse 2! It's a great device, and I know you will love. I understand you may have some trouble getting it implemented, however. I have some information that should help you.

  First of all, take a look on the article in the link below to ensure that your Mac meets the system requirements for using a Magic Mouse 2:

  Identify your wireless Apple keyboard or trackpad mouse

  Under the section "Identify your device and requirements", this information is provided to the Magic Mouse 2:

  Magic Mouse 2

  • Lightning connector, built-in battery
  • Requires OS X v10.11 or later version

  If you are not running OS X 10.11 (El Capitan) or later version, you will need to update your software OS X before being able to use the Magic Mouse 2. You can use the link below to help to update if you need to.

  Update the software on your Mac

  Once you are on OS X 10.11, you can use the following article to configure the mouse Magic 2.

  Configure your Apple wireless devices

  Have a great day.

• Green flashing light on the Magic Mouse

  I thought that a green light flashing on the Magic Mouse 1 (not rechargeable), means that the necessary batteries replaced or recharged.  I put new batteries in, and yet the green light continues to blink.  This is a new mouse, sent to replace their defective Magic Mouse.  The defective mouse works, but I can't get the new one to work.  I can't get support to help me with this. I tried to use the conversation, and they have disconnected while I was writing my question. RRR

  Anthony,

  Look at my answer to the other thread.   It may be better to keep all questions here at the moment.   The other thread is no longer.

• Magic Mouse 2: open hole, no light

  I just bought a Magic Mouse 2.  Right next to the power switch on the bottom, there is an opening. I guess it's the sensor. On my mouse, it is not lit, and there is no cover, just a hole opened.  Is it the way it is supposed to be?  Without light and without coverage?

  Yes, it's as expected.

• Magic mouse - no lights?

  I just bought the magic mouse2 and I have an IMAC of 2012.

  I plugged in the cable of the lightning of the magic mouse and turned on (and it is plugged in a few hours) and theres still no light or anything?

  I updated my computer rebooted, used various lightning cables but nothing seems to make the charge of the mouse or light in anyway?  This mouse is defective?  I've never had problems connecting the touchpad or keyboard before.

  Thanks for any help

  You say that you have updated your system... what version do you have now.  (It should be 10.11.3 El Capitan)

  If you have an Apple store in the neighborhood, take it they test it on place and replace if necessary.

• To stop a Magic Mouse to work?

  I have an original Magic Mouse. It has new batteries, but clicking on it or by pressing the mouse does nothing. The green light doesn't Flash or lights. What he would do to stop working like this? Any ideas or suggestions would be very appreciated.

  Thank you.

  Batteries installed incorrectly, lack of battery charge come to mind

• Last Magic Mouse 2 is not compatible with the Mavericks 10.95 - and that stinks

  It is not so much a question as an expression of stunned disappointment.  My old mouse Magic went kablooey, and so I got a new.  Unfortunately when I the paired with my MacPro 2012, running the Mavericks 10.95 (sorry Apple, you have not matched the Mavericks speed and performance with Yosemite and El Capitan) I discovered that features the touch like scrolling and swiping has not worked.

  After an hour to read the little booklet that comes with the mouse, zap the PRAM, reset the SMC and usually ask myself? *  I watched the Magic Mouse box and found the answer in 3 grey dots on white type: requires OS 10,11 or higher.  All right.  Mea culpa, caveat emptor, blah blah.  I should have read through the entire page of the Magic Mouse on the Apple Store Web site, but I already have the product so don't figure there were many new take into account.

  However, it seems strange to me that a completely necessary peripherals does not work with a BONE from a few years ago.

  There are loyal customers (30 years of computer science and I have never used or owned a PC) who use your products as professional (I'm a sales manager of creation) and, for reasons that go beyond taste, prefer your earlier and faster OS.  Apple wants to move the herd along for many understandable reasons.  I do advertising.  I get it.  Offers new features and the "improvements" that Miss on users who refuse to put up-to-date is perfectly logical.  But prevents them from having a functional Apple mouse goes too far.  It will encourage strong armament and it stinks.

  In light of Apple's strategy, it seems pretty ironic that the same company that once derided the PC world as thinkers authoritarian group straight out of Orwell is curve at this level to get its users to conform to his version of the future.  What the * happened to "Think Different"?

  Good question, I guess, and I can only opine; as you know, we are here just volunteers.

  The question is... when a company changes its products.   As I see it, different operating systems have developed over the years at a huge pace, such that cannot not could be foreseen four years ago.   So the Magic Mouse 1 was fine for the moment but did not have the ability to adapt to meet the current needs.     So what does Apple?   It must be a new mouse that will respond to current needs and anticipate the needs for some time in the future.

  You can still buy the old MM1, although you might have to go hunting.   And of course, you can take the old one back if it was purchased less than 14 days ago in most countries and 28 days ago in the United Kingdom and most European countries, I believe.

  I hope you get over your troubles.

• Suddenly, my magic mouse not, turn on even with new batteries.

  Magic mouse does not light

  Are the batteries installed correctly (polarity?) If Yes, then you may need a new mouse.

• Magic Mouse 2 * new * does not work

  New macbook and new magic mouse 2 but I can't connect via usb or bluetooth, I tried to restart the two and wait for it to load. literally, I don't know where to go from here. need help! Save me

  Note: Magic Mouse2 cannot be used when you are connected to his cable.

  • Setting up your Apple - Apple Support wireless devices

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to the USB cable to the port of lightning on the device and
  2. the other end of the cable to your Mac.
  3. Make sure the switch is in position I. (Green will be visible).
  4. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  5. The Bluetooth Preferences window indicates the level of status and connection fees of
  6. your device. When the device is charged, unplug it for wireless use.

  There are several opinions and comments about magic Mouse2

  http://www.Apple.com/shop/reviews/MLA02LL/A/magic-mouse-2

  also you might feel free to contribute to them, but also to comment

  Apple feedback • comments support • return of products

  Among the comments, are issues of the user that may or may not help you

  make the best diagnosis of your installation + user experience problem.

  If your product (MM2) is the Thunderbolt port, as it should, it may

  not being able to associate as some suggest it can, through the use of the USB port. Since

  This is not a. The port of loading may or may not be useful to attach

  mouse to the computer during the initial installation; to see if it is recognized.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • IPod, Mac and iPad US technical support:
  • (800) APL - CARE (800-275-2273)

  You can find it does not help. Or can the gremlin inside the MM2

  self-pity and decide whether to allow a connection in any case. Say what? Please?

  If the mouse was purchased directly from Apple (official, store or online)

  You should have 14 days to return the product. An Apple Store

  Genius can be useful in practice to troubleshoot or to help set up a mouse.

  My mouse are USB & all fasteners; they can't run away + I of good spare parts.

  Sorry your mouse is pointing upwards. I give a talk, no uncertain words.

  Good luck in this case!

• Sensitivity of the magic mouse 2

  OS X 10.11.3 (15 d 21) model name: iMac model identifier: iMac14, 2 name of the processor: Intel Core i5

  I recently changed to a Magic Mouse 2 and it worked perfectly. Recently the sensitivity seems nave has increased as evidenced by the fact that I have to hover over a link to activate it. How to restore to original operation?

  Hi DCRIOW,

  If you want to adjust the settings of your Magic Mouse 2, take a look at the resource below to adjust the settings in system preferences.

  Using system preferences

  Preferences system systemic control ("global" settings) and is available in the Apple () menu in the upper-left corner of the screen. Preferences system allows you to set things like your resolution screen, keyboard, mouse, sound, taken the printer settings, settings, accounts and more sharing.

  Customize your mouse

  The preferences panel mouse look different depending on what type of mouse you are using. These settings allow you to set the mouse sensitivity to control how quickly the pointer moves on your screen when you move your mouse, and adjust your double-click reflexes. Other controls may be available, depending on the type of mouse you are using.

  

  1. In the Apple Menu, open system preferences.
  2. Choose View > mouse, or click on the mouse icon.
  3. To control the speed of the pointer (cursor) moves across your screen when you move the mouse, click on Point & click and use the tracking slider to adjust the speed.
  4. If double-click speed if poster, you can use the double-click slider to adjust the speed.
  5. To change the action settings, click the tab more moves. You can enable and disable the gestures for blow and the Mission control.

  Configure your Apple wireless devices

  Mouse Magic 2, Magic Keyboard, Magic Trackpad 2

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to USB cable to the port of lightning on the device and plug the other end of the cable to your Mac.
  2. Make sure the switch is in position I. (Green will be visible).
  3. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  4. The Bluetooth Preferences window shows the status and costs connecting your device. When the device is charged, unplug it for wireless use.

  Note: The Magic Mouse 2 unusable when you are connected to the cable.

  Take care

• Magic Mouse 2 does not work

  I bought a magic mouse 2 and connected to the computer, but the computer can't find it. Button / mouse start stop is on (green), but nothing happens. My version is OS X Yosemite 10.10.5

  Thank you!

  You need to upgrade your system to El Capitan 10.11.3 before your magic Mouse2 will work properly.

• Magic Mouse 2 crashing MacPro end of 2013

  Recently bought a Magic Mouse 2. Whenever I try to connect to the Mac Pro end of 2013, it it connects moves a little bit and then block the Mac - goes to black screen and the crash report.

  Also have a MacBookPro running fine (on El Capitan).

  Anyone with similar problems?

  Model name: Mac Pro

  Model identifier: MacPro6, 1

  Processor name: 6-Core Intel Xeon E5

  Processor speed: 3.5 GHz

  Number of processors: 1

  Total number of hearts: 6

  (By heart) L2 Cache: 256 KB

  L3 Cache: 12 MB

  Memory: 32 GB

  Boot ROM version: MP61.0116.B16

  Version of the SCM (System): 2.20f18

  Version of lighting: 1.4a6

  El Capitan 10.11.2

  State requirements system 10,11 or later version.

  The Magic Trackpad 2 - Technical Specifications

• Lost Connection using the Magic Mouse

  For a week, whenever I move the mouse, it freezes with a pop - up message "lost connection".  Click again and the connection is re-established.   I replaced the batteries, but the problem persists.  This week, the problem got worse. All solutions?

  Hello Carolyn,

  Can you tell me a little more about your mouse and the machine that you are using.   Your profile says you're on 10.5.8 which means that you use the system to Leopard.   Is this correct?

  Can you tell me what brand of batteries you use and whether they are regular or rechargeable?

  If you hold the mouse upside down is the flicker of green light or is it stable?

  If you shake it is there any noise from traffic on the inside?