Major problems: not enough space, tried formatting, now the FAT is corrupted, what should I do?

Similar Questions

• Why have I not enough space to update of the first through CC?

  First wouldn't boot correctly. I was prompted to update software and when I did, I get the error "not enough space".

  Hello

  Please check if you have installed Premiere Pro on the main drive.

  Also, check if you have enough space on this drive.

  I recommend you move data from your hard drive to another, empty your trash, huge and heavy moving Date desktop on the secondary drive.

  You can also try to empty the temporary files, sometimes it stores a large amount of data.

  Kind regards

  Ilyes Singh

• Not enough space on disk for the Partition: Windows Bootcamp

  iMac (retina 4K, 21.5 inches, end of 2015)

  Processor: Intel Core i5 to 3.1 GHz

  Memory: 6 GB 1867 MHz DDR3

  Graphics card: Intel Pro Iris Graphics 6200 1536 MB

  The OSX Version: 10.11.4

  I tried to download windows for my iMac. I bought the full version via USB for it. I followed these instructions: create an ISO image for Windows - Apple Support installation media Boot Camp to create my own ISO image. I did, and I ejected from disk image Windows "10" as he told me too.

  When I go to download the support software and partition it, he will get after downloading the Windows Support software, then to halfway in partition the drive, it will say "disk does not of enough space to be partitioned. (PS) The "BOOTCAMP" image will appear on the desktop until it says the message and then will disappear and the message will occur.

  I fixed the disc and it defragmented. It's a lot I put 300 concerts for the Partition. I don't know what is happening.

  I've also entered the recovery disc and repaired this way.

  I'm on the forums before I decided to call Apple.

  Thank you.

  You have a Fusion drive?

• Windows 7 backup failed, saying: not enough space still there clearly is... What is happening?

  See the screen shot in the link...... it's weird... the backup is valid it is one he has already made and still there is enough space to hold the backup then what happens?

  http://img128.imageshack.us/img128/7779/backupspace.PNG

  Hello sirius.

  Check out this technet article.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/18c33a73-5719-499a-866C-af124c05e671/

  Let me know if it works

  all the best

  Kind regards
  ADDISON

• I just added a gift card for iTunes and my credit card is low. I'm trying to make a purchase, but it won't take the gift card and he keeps trying to remove the credit card. What should I do?

  I just added an iTunes gift card and I am trying to make a purchase. My current credit card is too low to make this purchase. How can I get the gift card funds get used first?

  * I tried solvent of the card, but do not know how do that either on account/payment.

  You use the sharing of family?

  If not, his look as if you have a problem in your iTunes account,

  gift card, you have the options to choose a redeem code to place the card, credit

  in your case, I recommend contact that support the iTunes to Apple Care.

• I have this error: error trying to validate the Winsock base providers, what should I do?

  I have a problem to connect to internet, even do I got excellent signal, it is always the same: network address acquisition. Check with network diagnostics, and then displays this error: error trying to validate the Winsock base providers. and suggest that you ask for help.  Can you give me a solution to this probem. Thank you very much.

  Click Start---> run---> type "cmd" in the Run dialog box, click on 'ok'. Type "netsh winsock reset" on the command line without the quotes and press ENTER. Leave the command prompt, restart your computer to see if it solves your problem.

  Good luck.

• I tried running chkdsk/f, but I was told I did not enough privleges and had to UN mode high. What should I do?

  I tried to run chkdsk /f on my computer at home, but I was told I had no sufficient privileges and had to run chkdsk /f in elevated mode.  How can I get enough privilege or run in elevated mode?

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• Hello! I tried to activate Adobe audition, but it happens that there was an error with the code 24:24! He does not think I write to activate the code number! What should I do?

  can someone help me con el problema? El codigo error not already appear y he intentado several times call por telefono pero no me han dado razon!

  Respond to problems of activacion y creation

• Cannot remove the r ' only R backups, not enough space

  I have V3.01.1037.00 R & R installled on my son's cell phone.  It has a few old R & R backups that I want to delete.  I ran R & R programs in the list and found the Advanced tab, which allows me to delete the backups... but when I try and remove the one it says (after request confirmation and "Please wait while the backups are deleted"):

  "Rescue and Recovery has not enough space disk to perform the requested operation"

  and then do nothing.  I tried turning the properties from the Recycle Bin to "do not move files to the Recycle Bin" in case that was the problem, but that did not help.

  Backup file is 15 GB (!), free space on the disk is 5 GB.

  leamphil, welcome to the forum,

  removal of the last backup that was made on his own, and then the others worked for other members.

  Hope this helps

• Not enough space for DB - formatted - now FAT is corrupted

  I received an error message after the music to transfer to my Sansa Fuze.  The message indicate that there was not enough space for DB and supposed to free 90 MB.  I have read the instructions on the website and formatted the drive.  Now, I get an error message saying that FAT is corrupted and say to connect it to the PC to get FAT.  I reconnected it to the computer without modification.  Then, I downloaded the firmware zip file and uploaded the file on the disk.  Still no change.  Please notify.

  You can try the player formatting MSC mode.  To connect the player in MSC mode, with the player to the wide, slide the switch down to the locked position (you will see an orange color it), and then press and hold the< or="" back="" button="" while="" you="" connect="" the="" fuze="" to="" the="" pc.  ="" you="" may="" have="" to="" continue="" holding="" the="">< button="" down="" for="" a="" while="" until="" you="" get="" a="">

  If the computer recognizes the player in form through the computer.  If your drive is a one, fornat 2 GB as FAT.  For a 4 GB or 8 GB, formatted in FAT32.

  If it formats correctly and the drive does not operate normally, reformat through the player settings to optimize the memory.

  Another thing, sometimes the 'diskspace for DB' message appears due to a bad music file (s).  You can check the files that you have transferred before the trouble began.

• Problem with m230: not enough space for music DB. Please free 8 MB.

  OK, so. Hi, I'm new in this forum.

  Then.  I wanted to listen to music. SanDisk initialize arrived, then the 512 MB Sansa m230 and then the error:

  Not enough space for music DB. Please free 8 MB.

  And then you can see: no files 0/0. And the battery is fully charged. I thought that the...

  So I decided to connect m230 to my computer. First initialization, then the error came, had to wait a bit and then... the Sansa screen shows:

  USB connected MTP (and this popped into my computer: http://i30.tinypic.com/2i9jo82.png)

  Then. I open Sansa m230 in my computer and the folder that I saw was: RECORDING

  Well... I'm sure many of you could suggest me to format or reset. But... There is a problem:

  Where is the format button? (http://i31.tinypic.com/dvoky9.png)

  Then. I tried to format it in computer management. Device Manager > portable devices >
  Sansa m230. But... where is the format? (http://i31.tinypic.com/10x7q06.png)

  I went through a few topics, and someone suggested to format under removable storage, but there is no m230.

  Then I thought that I try the FirmWare update. But... the error popped up:

  The following error occurred: your device is in MTP mode. It can only be updated in MSC mode. Please disconnect your device and switch to MSC mode if you want to check the updates.

  But good... How can I change the mode MSC, coz... If I press the menu button on my m230, always pops up an error:

  Not enough space for music DB. Please free 8 MB. I can't do nothing in the menus. Aaand by the way, I have this player mp3 more than a year, so there is no guarantee or something for me I guess.

  Then. is there a way to do the hard reset or something? Is there a way to fix my m230? Feel free to ask me questions. I would be very happy if you answer.

  Aaand... Sorry for my English. I'm not from English speaking countries

  All the best,

  MagicIsland

  Hello MagicIsland, you may need to format your device, but it will delete everything on your player to try to see if you can always save the files when you connect your device by following these steps.

  http://KB.SanDisk.com/app/answers/detail/A_ID/1/kW/not%20enough%20space%20For%20Music%20dB%20error%20For%20m200/r_id/101834

  hope this work

• Trying to extend the c drive with space unallocated in diskpart.exe - I get the message that there is not enough space. what I am doing wrong?

  DiskPart.exe help - not enough space - I have more than 5 GB of unallocated space. trying to expand the C: drive

  Hello mark_kman,

  Thank you for visiting the Microsoft answers community.

  It sounds as if you have multiple partitions. Disk management and DiskPart extends the volume with a focus on the next contiguous unallocated space. For basic volumes, the unallocated space must be on the drive and must follow (have a plu sector offset number than) the partition with focus.

  If you are looking at disk management, this means that, if you look at your partition C: the unallocated space MUST be located directly to the right of the C: partition. If you have another partition between the two, you will be allowed to extend the partition directly to the left of the unallocated space.

  This could be a work around, if you have C: and D: and have files on D: but have more space.

  -D: shrink to create just enough unallocated space to store your files located on D:.
  -Create a new partition with unallocated space to move your files.
  -Move your D: files to your new partition.
  -Now, to delete the D: partition

  This creates unallocated space between your C: partition and the new partition that you created to move your files.

  -Now right click on your C: partition and extend as usual.

  Hope this helps
  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup Restore Time Machine: not enough space

  Hi all, I am a neophyte tech so forgive me if I'm not clear. I will try to explain the problem as best I can:

  I have an old MacBook 2009 running Mountain Lion. A few months ago, my brother gave me his old Pro and so my MacBook 2009 fell by the wayside. I used an external hard drive with that old computer as my backup time machine, but as I tried to transfer a lot of documents and photos and update of dropbox and download photos of google and to understand each of these things as I went along, I totally messed up the MacBook. Just... things are weird... nothing was, where it used to be and my photos were gone and Yes, much of this is probably down to me trying to understand a bunch of new programs at once, BUT what I want to do is to restore it to the way it was using a time machine backup.

  So, I googled around and I know when I start it up until I'm supposed to press Ctrl + R and choose the backup that I want, but when it gets to the part where I select a destination and click the only option (the Mac HD), an error message appears with a yellow flag saying "this disc is not enough space to restore your system.

  Now, I don't really know what that means, but what I want to do is to get rid of the current way, this computer is completely and attach it to the way it was when I did the last Time Machine backup.

  Someone help me please... this stuff is so frustrating when I can't figure it out for me and I am sure that there is an easy solution. I read a lot about partitions etc. but I don't know what all of this means that even.

  Thank you in advance!

  Alexandria

  Boot into Recovery now command + R to start. Choose disk utility and erase the boot volume, it should be named Macintosh HD, unless you renamed it. When the erase is quit disk utility and choose to restore from your Time Machine backup. OS X: on OS X Recovery - Apple Support

• Not enough space for music DB error message.

  Hello. Whenever I try to open my Sansa clip mp3 player continues to display the message: "not enough space for music DB. Please free 30 MB. And I have 2 GB. It happened when my brother said he tried to better the music so he can get over. That's all what he says is reached. Now I can't fix it. I tried to remove even the files that are on it that did not help. It comes only to return when I reopen it the Clip. Is there someone who knows the solution to this? Thank you very much.

  PromisedPlanet wrote:
  Select "Format" in the menu "settings".  (Careful, this will delete all the music on the video.)

  It's the extreme solution. Try this first.

• Hard drive receiving "there is not enough space available to complete this operation" in Windows 7

  Hello, I have install windows 7 upgrade from windows xp. My total hard drive is 500GB.but after installing windows 7, it shows 150 GB of disk space is not allocated. I tried disc managemaent IE right click on "Unallocated disk 150 GB" then volume.then simple new format then on next-next and then finish... and it displays error   "there is not enough space available to complete this operation".n haa, I did a system restore in windows xp. Since the pc went slowly & with money problems... But it does not work.

  Therefore, I installed windows 7 holding the pc faster. I think the restoration of the system to occupy this disk 150 GB space.so is show unallocated.

  Please, be sure to this my problem. Tell me how to keep back my total 500 GB... Give me an appropriate solution.   I will thanxful to you.

  Kind regards

  Pranjal

  * original title - 150 GB hard drive is unallocated.showing "there not enough space available to complete this operation" _ *.

  Hi pranjal1,

  Please see article with other useful information:

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think