Make error at startup on another device using my IP address

Similar Questions

• Error 633 modem or another device connection does not...

  OK, I tried literally everything to get my modem working again. He used to work some time ago... but since SP2 has been installed it is the first time that I used it (normally online via broadband network) and he refuses to work.

  There is no dial tone at all - the message immediately after the opening of port dialogue...

  Displays modem device manager is OK - no yellow question mark.

  Properties of the modem shows active sound and COM3. No conflicts.

  I tried so far the telephon.ini and tapiini.exe which has been proposed by microsoft to find that they do not exist on XP systems.

  I have uninstalled and installed the modem twice, as well as the software - the same error.

  I can still query the modem at all - same error.

  I recently installed the new software modem available on this site and it is listed as Toshiba Software Modem (driver provider is Agere). Even the program to set the country code reports an error - unable to open the port.

  Please - what on earth goes here - usually something solves a problem - again, I spent three days looking and nothing works. Microsoft has really screwed up to SP2?

  There is nothing in my system that uses a modem - recent software has been CutePDF printer, sony ericsson mobile phone image software that has been uninstalled because it did not work (I have not Infra red). Everything else has been there even where it worked.

  Please can anyone offer help - I'll reiterate that everything with the system reports as running OK.

  Thanks in advance

  Hi guys

  One of my friends had the same problem. We tried to solve the problem, but without success. He sends his notebook to the Service partner and the modem is reworked. Now, it works fine.

  If you have European machines there are two-year warranty. Contact Service partner they do the same thing on your laptops of the ca.

  Good bye

• Safari allows me to imitate other devices when entering a user agent string, i.e. it can 'looks like' an ipad or android phone. Firefox does this - look like another device using strings of appliance user agents?

  Can I use a chain of any device user agent in Safari to get safari emulate this device. This is a very useful feature. My safari can act as an ipod, ipad, windows mobile phone android (of any type) etc. Ideal for testing mobile applications.

  Firefox to do this. I want to run firefox on my phone. I want FF on my mac to WATCH AS target a phone on the site.

  A good addons is https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/

• Got a pop up that says to another computer using my IP address.

  When I clicked on the pop-up, he disappeared.  My computer seems fine.  We have a safe home network with three computers.  What is going on?  Thank you, Betty

  Open a command prompt Windows at high level the entrance of these 2 commands.

  ipconfig/release

  ipconfig / renew

  This will require a new address without defining a default address to see if it solves your problem. What tends to happen when other "less intelligent" devices on the network that do not properly manage their own leases to addresses. It comes to printers, tablets, phones and game consoles. In the latter case, it is preferable to set these to a single address, so they will not change.

• another person using my email address

  He said that I was hacked and infected with malware bug, but read the comments here which seems unlikely. Help please

  You can follow the ZigZag3143of response to the post of lettie15on the link below:

  A person who uses my e-mail address

  Do not hesitate to contact us if you need assistance.

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

• "The port is used by another device. Printer does not print.

  I have a printer Canon D661 on an Ispiron Dell s 545 under Win XP SP3.  Everything worked fine until today when he leaves the impression.  I have uninstalled/reinstalled the printer through Windows and through the uninstalling Canon.

  I have downloaded the latest drivers from Canon, did all my XP, updates my Dell updates driver material and restarted several times than I can count in the process.

  I've stopped and started the print spooler.

  Still nothing will print.  The printer status window insists that "the port is used by another device.

  I ran impression of Microsoft Diagnostic tool, he says that's all right.

  It is a USB port, as the mouse and keyboard.  Nothing else.  I tried swapping USB ports between elements, no help.

  The printer works fine if I plug it into my USB netbook, so it's not the printer.

  I receive the error message even if the printer is connected to the office he "belongs" to.

  Until yesterday it worked fine, same print network jobs on other computers.

  I went home from 11:00 to 18:30 today.  Help?

  Thanks for the reply!

  I tried what you suggested, but it did not work.

  Finally, I got it going.  For some reason even if it was still installed on LPT1 on that question and two other computers, this computer has stopped working.

  I found the installer was not obvious choice to install on USB1 and that was when he started working.

  Interestingly, it works installed on LPT1 on two laptop computers when it is connected in fact on their USB ports.

  Thanks again.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?

  When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device.  How can I work around this problem?

  Hi ejp70,

  1. did you of recent changes on the computer?

  2. to when was the last time the scanner was working fine?

  3. you have any other printer\scanner connected to the computer?

  If you have any other printer\scanner connected to the computer, disconnect them and check if it works.

  I suggest that you uninstall and reinstall the scanner to the computer, also make sure that you install the latest drivers for scanner on Canon website.

• You don't you email / account that Roadrunner mail is used by another device?

  While reading my email yesterday a gray box appears on the screen that says "cannot get mail / Roadrunner Mail account is in use on another device, then a pop up says your software must be updated to 9.3.4... so, I press the button install... it starts to update... the thing is that I don't date my iOS to 9.3.4 the day of the update is out. I think it is 08/08/16...

  the update finished I read my email and I get page to configure an e-mail account, I'm looking for my roadrunner acct and he went...

  Today, I get the ipad3, I have time to work on the problem now... to my amazement my roadrunner e-mail account is back, rated and work.

  Everyone thinks I should be concerned about this chain of events... I'm always worried about hackers, any help appreciated. Thank you

  Sounds more like a messed up iOS upgrade than someone hacking into your device.

• e-mail unavailable because "in use on another device?

  Once in a while I get a message on my iPhone 6 which I can not send because my my "account is used on another device. I use apple mail. The ides what it is?

  Thank you

  The server wishes to inform you that an another e-mail client POP3 is currently connected. POP3 does not supports multiple simultaneous connections.

• "Another device on the network use my ip address".

  I tried to check my mail and could not and got this message "another device on the network use the IP address of your computer." I have never seen it before. He also said that I could change the IP address, if I continued to have problems. I bought this iMac and used Migration to transfer all the stuff from my old iMac that is still used. That was months ago, but I never had this message up to now. So should I change one of the IP addresses? And if so, how is that done?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• Another device is using my IP address

  Today morning when I switched on my macbook, I received a message pop - up-"another device on the network use the IP address of your computer.

  This means that my computer is hacked? Or has nothing to do with the common wi - fi network, I use?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  Read this noting the last two paragraphs:

  For Apple ID - Apple Support two-factor authentication

  You can try to add on your suggested such password or disable the service and then connect.

• Message appear conflict of IP address at startup. Another computer already uses the network with the same IP address. How do I cure this?

  When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.

  Hello

  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista

  2. only the error message appears only when the Xbox is connected to the computer or at both times?

  3. have you made any software or changes to the material on the computer before this problem?

  Please answer these questions and provide additional information so that we can better guide you.