Management services ReadyNAS offline after 6.5.2 updated

Similar Questions

• Management Services is offline readynas pro 6

  I rebooted my NAS this morning and it does not load the admin page, I can access some applications via the ports, but not the admin page.

  Any help would be greatly appreciated, I have no idea how to solve. Well above my pay grade.

  Its a readynas pro 6 OS6, I officially running has no support. I really want to avoid a reset nothing can save. SSH logins fair we currently I enter a user name.

  See you soon.

  I sent you a PM.

  Really, you should backup your data.

  Any important data should be stored on just one device.

• The RN102 management service is offline (6.5.1)

  Hello

  I work in a nonprofit who is having the same problem as the others 'offline' status of the server, problems are also encountered with respect being able identify you via Readycloud. Do you think we could have similar problems and if so how do we fix?

  After a few config was fixed and a re - install OS was done ReadyCLOUD now works very well for the HUTS.

• 6 pro: Managment Services is offline (RNOS 6.4.2)

  All,

  I've seen this problem on other posts, but not of direct response. My NAS has stopped responding, both WebGUI and SSH work more. It could have happened after that she filled.

  Unfortunately no guarantee but any help is welcome.

  Dave

  There was a problem with the file system on the volume of the root, so I copied the content off, formatted the volume root, copied data retrospectives and fixed a number of things with the volume of the root and then he started back to the normal mode.

• RN516 - management service offline after updating 6.4.0

  Hi all

  Since 6.4.0 to day I have the problem now:

  Management service is offline now

  

  Can someone help me because can't reset factory because of the backup is not uptodate.

  Thank you.

  Hello

  I contacted the Netgear Support: they solved my problems on RN516 since 6.4.0 update.

  Then the same contact

• Update of the management service to 100% CPu after I patched to 4.1.0 build 345043

  Hello

  Recently our Windows server 2008R2 patched as hosts vSphere Server with the fix above.

  After that, the update management service starts a java process that works 100% of the CPU and the custom

  Let in.

  Restart the server or restart service makes no apparent difference.

  Also, killing java.exe doesn't reappear after a few seconds.

  Memorywise seems to be correct.

  Clues on where to start looking for what it tries to do?

  Included file is procmon, which says that the result of the java call's NAME NOT FOUND

  I couldn't find a way to paste Cut, so the text instead of the file.

  Concerning

  Tommy

  Uninstall everything already installed customer manager update and Manager himself, reboot, and reinstall update fixed the problem for me.

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• Impossible to check updates on Vista Service Pack 2 after Update Agent has been installed.

  Under Vista Service Pack 2 x 64.  Windows Update Agent 7.6.7600.256 was installed on 27/06/12.  Since that time, I can't verify or install updates.  I tried Fix - It, and it did not help.  Pls advise

  McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Chances are that McAfee 'leftovers' here are your troublemakers.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart!]

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall McAfee Security Center via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you doublecheck.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility. LEAVE not your keyboard until the race is over, restart.

  6. do a clean install of McAfee Security Center (using your product ID, if need be) & restart. If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  7. manually and repeatedly day McAfee enforcement, until you get a "not more than updated" or similar prompt.

  8. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/doit/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. restart again.

  11. reset Internet Explorer according to the instructions on this page: http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/946414 [ignore the title & symptoms].

  12 b. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once again and then test by launching a manual check of updates & see if KB2698365, KB2718523, KB2691442, KB2655992, KB2719177 & KB2719985 allows you to install now; Follow all the instructions.

  14. in response to this post with a status report.

  Good luck!

  ===============================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome or Firefox as a default if you like.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.

• Homegroup that my pc can't find the other pc, it seems that the Peer Networking Identity Manager service is not running. How can I make it work

  I lost contact with other computers in collective housing. It would seem that the Peer Networking Identity Manager service (p2pimsvc) does not work. How can I make it work?

  Hi Ken Jones571,

  ·         Did you do changes on the computer before the show?

  I suggest you to set the service to automatic and check if this is useful.

  a. click the Start button and type Services in the Start Search box and press enter.

  b. find the Peer Name Resolution Protocol (PNRPsvc) services or services Peer Networking Identity Manager (p2pimsvc), set it to Automatic to clicking on the service and selecting Properties and change the Startup type to Automatic.

  Method 1: I suggest you try a clean boot and check if the problem persists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Method 2: It could be that the NVRP svc and p2pimsvc is corrupted, remove entry can help you solve your query. Check the following location and delete the file idstore.sst

   

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Let us know if that helps.

• BSOD in Windows 8 memory exception error System & Management Service.

  Dear all,

  I recently bought a lenovo U410 of the United States. I've been using this computer in Germany since the week last in Germany. Over the last week I had to re install OS 8 on my computer. After re-installation, I was often do a lot of memory management & Service Exception BSOD errors. How can I rectify this?
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of WIndows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  
  
  
  Team Zigzag3143.com  

• Update of Pluging Manager works does not after upgrade

  I think I'm having the same problem as everyone else and I'm pulling my hair out trying to understand what is happening.  Let me first start of by saying that I am in no way a SQL DB, so I'm just Dodge my way through so far with no luck.  So far, that's what I did.  I was running ESX 3.5 U4 and vCenter 2.5 U4 with a server remote phyiscal SQL 2005 for VCDB & UMDB.  I upgraded to 4.0 vCenter and everything was fine.  Then I tried to update Update Manager.  He's been through, I managed to install the plugin Update Manager, but it is disabled and whenever I load the vSphere Client I get and error, "there was a connection to VMware vCenter Update Manager error - vcenterserver:8084.»  Unavailable temporarliy database or network problems.

  At the moment I have:

  VMware VirtualCenter Server Service set to automatic and log in under the same account AD as with the previous version.

  VMware Update Manager Service is set to automatic and log in as a Local System.  Update Manager service will not start if you use this account or any account AD.

  System DSN defined for the Update Manager and VirtualCenter with SQL Native Client driver.  Remote server entered correctly and I use Windows authentication integrated with the default correct database selected and everything else is default.  When I do a Test connection, I get a successful connection with the two system DSN.

  However, Manager of continuous update not working which VirtualCenter Server works fine and both of the DB is on the same remote server.  Just for fun, I tried to install SQL Express on the vCenter Server Server for the Update Manager and it worked.  However, I would use the same DB Update Manager that I used on the remote server.  I checked the log file, and that's what I'm after launching the vSphere client.

  Product = VMware Update Manager, Version 4.0.0 Build = 162871 =

  Managed implementation information configuration process

  Unable to get the module name to process 4. Error: 299. Ignoring the process

  Starting managed the java.exe process

  Starting managed process rdevServer.exe

  Monitoring process started

  Internal Manager of the tasks established demand...

  Handler created email alerts...

  Configuration manager created...

  Locking of entity manager created...

  vaCrypto initializing...

  Key responsible VALM C:\Program Files\VMware\Infrastructure\Update Manager\ssl\valm.key

  Health services manager created...

  Collector of statistics created task...

  Trace for all: false

  Record of integrity. BaselineComplianceStatusCollector: true

  Integrity.ComplianceStatusManager trace: true

  Record of integrity. DVSManager: true

  Record of integrity. ScheduledTaskManager: true

  Record of integrity. SessionManager: true

  Record of integrity. UpdateComplianceStatusCollector: true

  Record of integrity. UpdateManager.remediate: true

  Record of integrity. UpdateManager.scan: true

  Record of integrity. UpdateManager.stage: true

  Record of integrity. VcIntegrity.setConfig: true

  Record of integrity. VcIntegrity.setNewUpdateConfig: true

  Trace loaded objects.

  VcIntegrityPlugin Init

  Add reminder to Ufa Shutdown manager.

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  VcIntegrityPlugin Start

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  I don't know what that means or how to fix.  Any help would be grateful.

  Hello

  As far as I understand, you are using integrated Windows authentication. Can you please try to use SQL Server authentication instead of Windows authentication? Update Manager does not support Windows authentication when the database is on a remote computer. The database and the DSN system must use SQL Server authentication.

  You can also take a look at the following thread: http://communities.vmware.com/thread/212853?tstart=0.

  Hope this helps,

  Margarita

• The EMP process Manager service cannot be started

  Hi I have installed EMP, planning and essbase, now when I try to start the EMP process Manager service it is said that the service has started and has stopped because some services stop if they have nothing to do.
  the services that are running on my system considering essbase space work and shared services.
  I'm relatively new to EMP and I'm just starting to use it, including at - it a particular order to start the services of EMP
  Help, please
  Thanks in advance

  The RDBMS user doesn't have sufficient rights.

  Connect as SYS (DBA) and run this script and then re-create the tables (database configuration) using config utility:

  CREATE THE USER EPMREP
  IDENTIFIED BY EPMREP
  DEFAULT TABLESPACE USERS
  TEMPORARY TEMP TABLESPACE
  DEFAULT PROFILE
  RELEASE OF ACCOUNT;
  -1 role for EPMREP
  GRANT CONNECT TO EPMREP;
  ALTER USER EPMREP ROLE DEFAULT ALL;
  -12 system to EPMREP privileges
  GRANT CREATE SYNONYM OF EPMREP;
  GRANT ALTER SESSION TO EPMREP.
  GRANT CREATE VIEW TO EPMREP;
  GRANT CREATE SESSION EPMREP;
  GRANT CREATE SEQUENCE TO EPMREP;
  GRANT CREATE PROCEDURE EPMREP;
  GRANT ALTER USER TO EPMREP;
  GRANT CREATE TRIGGER TO EPMREP;
  GRANT CREATE TABLE EPMREP;
  GRANT SELECT ANY DICTIONARY OF EPMREP;
  GRANT CREATE TYPE EPMREP;
  GRANT ALTER SYSTEM FOR EPMREP;
  -should be removed after Installation of the EMP
  -REVOKE ALTER SYSTEM FOR EPMREP;
  -1 contingent of Tablespace to EPMREP
  ALTER USER EPMREP QUOTA UNLIMITED ON USERS;

  HTH-
  Jasmine.

• Receive an error message that the HP Connection Manager service not installed

  Original title: Application of program compatibility... I get a box that says. Service not installed HP connection manager... so it says incompatible... How can I fix it?

  This box appears whenever I start my computer...

  Hello

  1. what version of Windows you are using (Windows XP, Vista, 7)?

  2 did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Step 1: Run in SafeMode networking

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  If the problem persists, follow the next method

  Method 2:

  Let us try to reinstall the HP connection manager and check with the question.

  HP Connection Manager service

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-Connection-Manager-service/TD-p/891309

  It could be useful!

• M476dw MFP: M476dw goes offline after each print job

  My printer is only around the age of 18 months. A few days ago, it is taken offline after each print job. Message in the print queue dialog box indicates that the printer is not connected.

  The only way to print is voltage and send the print job after the re-start. But once the work is finished, it turns off online again.

  What is going on? And how can I solve this problem? Help, please.

  I'm on OS 10.11 on an iMac and a MacBook Pro.

  grandbob his

  So far so good. I printed TWO documents (woo - hoo!) and the blue wireless light is still on.

  I wonder why I had to do the restore anyway.

  I'm keeping my fingers crossed.

  Thank you very much