6 pro: Managment Services is offline (RNOS 6.4.2)

Similar Questions

• Management services ReadyNAS offline after 6.5.2 updated

  I used my RN104 successfully since her installation.

  Discs 4 x 3 TB approved without incident running.

  Installation of firmware updates when you are prompted.

  But with the upgrade to 6.5.1 6.5.2, I cannot now access services of management by Netgear RAIDar.

  If I still have access to the data on the network.

  I did an OS reinstall but ends with the same result.

  Factory reset is not an option preferred at this stage.

  Curiously, radar, it shows that 3 active disk on the unit all 4 lights are active.

  How can I try to fix this problem?

  It seems that the problem is now solved. The system has started and the service is offline.

  It is always good to have a backup.

• Management Services is offline readynas pro 6

  I rebooted my NAS this morning and it does not load the admin page, I can access some applications via the ports, but not the admin page.

  Any help would be greatly appreciated, I have no idea how to solve. Well above my pay grade.

  Its a readynas pro 6 OS6, I officially running has no support. I really want to avoid a reset nothing can save. SSH logins fair we currently I enter a user name.

  See you soon.

  I sent you a PM.

  Really, you should backup your data.

  Any important data should be stored on just one device.

• The RN102 management service is offline (6.5.1)

  Hello

  I work in a nonprofit who is having the same problem as the others 'offline' status of the server, problems are also encountered with respect being able identify you via Readycloud. Do you think we could have similar problems and if so how do we fix?

  After a few config was fixed and a re - install OS was done ReadyCLOUD now works very well for the HUTS.

• RN516 - management service offline after updating 6.4.0

  Hi all

  Since 6.4.0 to day I have the problem now:

  Management service is offline now

  

  Can someone help me because can't reset factory because of the backup is not uptodate.

  Thank you.

  Hello

  I contacted the Netgear Support: they solved my problems on RN516 since 6.4.0 update.

  Then the same contact

• Active Directory Rights Management Services has locked up my task schedular

  my task scheduler is locked the top of model ADRMS fixing State Server clear I have no server of this a refurbished however task schedular is locked a States corrupt, any corrupted task controlled by Active Directory Rights Management Services, it also controls the recovery

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• iPad Pro no service

  Hi everyone had this problem on a new iPad Pro no service tried two new Sims just don't sign

  Hi Stuart,

  Thanks for this info and in choosing the communities of Apple Support and congratulations on your new iPad Pro. I know how to get a SIM card to work with iPad Pro is important to you! Items and the following steps will be useful for troubleshooting and solving your problem to obtain a SIM card in your iPad Pro:

  1. first of all, check carrier settings updates, as this may include updates from Apple and your settings provider for carriers, such as the network, by calling, data phones, e-mail, personal hotspot and voicemail settings.

  iOS: update your carrier settings

  2 reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  Reset the iPad - iPad help

  3. Finally, according to this article:

  If you cannot connect to a cellular network or cellular data

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account or your network, try to restore your device.

  The backup of your iPhone, iPad and iPod touch
  Import photos and videos from your iPhone, iPad or iPod touch
  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  See you soon!

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• Receive an error message that the HP Connection Manager service not installed

  Original title: Application of program compatibility... I get a box that says. Service not installed HP connection manager... so it says incompatible... How can I fix it?

  This box appears whenever I start my computer...

  Hello

  1. what version of Windows you are using (Windows XP, Vista, 7)?

  2 did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Step 1: Run in SafeMode networking

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  If the problem persists, follow the next method

  Method 2:

  Let us try to reinstall the HP connection manager and check with the question.

  HP Connection Manager service

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-Connection-Manager-service/TD-p/891309

  It could be useful!

• at the start of geta pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  starting to get a pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Method 1:

  I suggest you uninstall and reinstall download System Manager and check if the problem is resolved. See the article mentioned below.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Desktop window manager service is missing

  Reference Dell 1520
  Intel gm965 chipset
  Windows 7 Ultimate RC

  A few weeks ago, the Aero feature has stopped working on my Dell 1520 with Windows 7 RC.  I downloaded the latest driver for Win 7 for Intel, but that does not solve the problem.  When I went to restart the desktop window manager service, I found it lacking altogether.  Y at - it somewhere that I can download it again?

  Bring up the Run dialog box (using the Windows key + R), and then type the following command and press ENTER:

  CMD /K SC QC UxSms

  Copy the output and include it with your answer. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.

• How to fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)

  How can I fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)?

  Hello

  1. do you get any error message related to name resolution Protocol Service by peers or Peer Networking Identity Manager Service?

  2. the performance of the computer is made?

  3. were there any changes (hardware or software) to the computer before the show?

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information helps.

• Fabric interconnection B, management services do not respond

  Hello

  We have configured the option Call Home at UCSM and we get error below the option Call Home since last Saturday. We opened with Cisco to resolve this error, but according to the TAC TAC "error is a temporary error that connects the fabric can automatically recover."

  Here are the error messages that we get

  E mail-1:

  Object:

  Notification of the system-A system - diagnosis: GOLD-major-2011-12-27 17:54:09 GMT - 12:00 fabric Interconnect B, management services do not respond

  Message body:

  Name: System-A

  Time of the event: 2011-12-27 17:54:09 GMT - 00:00

  Description: fabric B event interconnection, management services do not respond

  Severity level: 6

  E mail-2:

  Object:

  Notification of the system-A system - diagnosis: GOLD-major-2011-12-27 17:54:09 GMT - 12:00 fabric Interconnect B, management services do not respond

  Message body:

  http://www.w3.org/2003/05/soap-envelope">

  http://www.Cisco.com/2004/01/AML-session' SOAP - env:mustUnderstand = 'true' SOAP - env:role ='http://www.w3.org/2003/05/soap-envelope/role/next' > '.

  http://Tools.Cisco.com/neddce/services/DDCEService>

  http://www.Cisco.com/appliance/URI>

  http://www.Cisco.com/appliance/URI>

  1058:SSI1442BFRC:4EFA0641

  http://www.Cisco.com/2004/01/AML-block">

  http://www.Cisco.com/2005/05/CALLHOME/diagnostic>

  2011-12-27 17:54:09 GMT - 00:00

  Interconnection UCS 6100 series fabric

  4.2 (1) N1 (1.43 q)

  1059:serial number: 4EFA0641

  0

  true

  true

  fake

  6

  http://www.Cisco.com/2005/05/CALLHOME"version ="1.0">

  2011-12-27 17:54:09 GMT - 00:00

  Fabric interconnection B, management services do not respond

  diagnosis

  GOLD-major

  Cisco

  Interconnection UCS 6100 series fabric

  [email protected] / * />

  [email protected] / * />

  ContractID

  [email protected]/ * */@SSI1442BFRC

  System-A

  Name

  [email protected] / * />

  + 00-0000000000

  Address of the Office

  http://www.Cisco.com/RME/4.0">

  N10-S6100

  0.0

  SerialNumber

  sam_content_file

  <>

  ACK = "no".

  cause = "management-services-refractory.

  changeSet =""

  Code = "F0452".

  created = "" 2011-12 - 27 T 23: 24:09.681 ""

  descr = 'interconnection fabric B, management services do not.

  DN = "sys/mgmt-entity-B/error-F0452".

  highestSeverity = "critical".

  ID = "2036245".

  lastTransition = "' 2011-12 - 27 T 23: 24:09.681" "

  LC =""

  happen = '1 '.

  origSeverity = "critical".

  prevSeverity = "critical".

  rule = "mgmt-entity-management-services-refractory.

  severity = "critical".

  status = 'created '.

  Tags =""

  [[type = 'management' / >]] >

  We want to understand what is the impact of this error and is there something we can do to avoid this error? I also want to know what that might be the cause get this error?

  Let me know if anything else is needed from my side

  See the downloaded file technology.

  Amit,

  I have reached out to the TAC engineer and will get back to you. In addition, please download tech to see the last UCSM to SR.

  "display the State of the extended cluster" would show the State of the cluster.

  For core dumps unannounced, you check in the Admin of UCSM tab

  Padma