Manager location rules - file Calc?

Similar Questions

• LCM: Basic rules Calc Manager vs planning files

  I need rule of LCM files and see the rules in 2 different locations, Foundation-> Manager of Calc and planning-> rule files. That is the right file where LCM, and what is the difference between them?

  In addition, files that were brought by the spectacle of LCM under planning-> rule files but non Foundation-> Manager of Calc. Why would it be?

  Thank you!

  FA

  To do this, you need to understand the underlying design. Unlike HBR, who acted as the repository of rules in Calc Manager, rules must be deployed at Calc Manager planning. Once the rule is deployed to planning, it (planning) maintain the copy of the rule in its repository. You can continue to make changes to your rules in calc Manager and there is no effect on the rule in planning.

  So for LCM, you will have the rules in 2 places, in Calc Manager (version may differ from what is in the schedule) and also in planning.

  So you can import via LCM planning rules and it will run without calc in Picture Manager. But if you want to change these rules and deploy it to the planning, you must import the rule via lcm in Calc Manager and redeploy to the schedule.

  Sree - mougel

• HFM Calc Manager of rules does not appear through excerpts-> elements of the application

  Dear team,

  We have management rules defined in application consolidation HFM EPMA but during extraction through the workspace using snippets-> Application parts, few of them make their appearance, but not all.

  That's why I wonder that all Manager cal rules are run in the context of Consolidation or not. Please provide steps to check whether or not all the rules of calc manager associated with the application.

  According to my understanding, Manager of calc rules should extract through the workspace using snippets-> elements of Application please confirm if my interpretation is correct or not.

  We are om EMP 11.1.2.3

  Your immediate response is much appreciated.

  Thank you

  Hello. Check in the Calc Manager that the desired rules are rule groups that are marked for deployment. If the rules are not in a set of rules, or rules in some rulesets not marked for deployment, then the rules will be not responsible for HFM.

  Kind regards

  Eric

• How to migrate EAS Business Rules for Calc Manager in 11.1.2.1 (without using EPMA)

  Hi all

  for the moment, we are on 11.1.2.1 and one more late upgrade scheduled to 11.1.2.3, use Calc Manager rather than the rules Business (EAS). Therefore, I would like to upgrade to business at Calc Manager rules, but without using EPMA (we would still use the classic Planning Administration). I read several documents and sites, but I was unable to find a way to do... Does anyone have a how or documentation about my problem?

  Thank you very much

  André

  P.S.: Maybe to make it a bit clearer: I won't spend 11.1.2.1 to 11.1.2.2. I would only use Calc Manager instead of business EAS rules 11.1.2.1 and I couldn't find anything that shows how or if it is possible to migrate from the business rules to Calc Manager (without using EPMA).

  You can change the method of calculation of the Manager of Calc application. I replied to your message in the Manager area of Calc.

  Concerning

  Celvin

• Not able to open the designer of the rule in Calc Manager in the workspace

  I installed Hyperion 11.1.2.2 on Win2003 sp2. My version of IE is 7. When I try to write/modify a business rule in the calc Manager, I get a warning "your current security settings don't allow websites to use ActiveX ie7... "Your page may not display correctly. I tried every setting in Internet Explorer to get this message across, but it doesn't. All the world faces this problem and what is the solution.

  Hello

  You will probably have to have Flash plugin (Yes it's kind of ridiculous that most of us use Calc Manager just to write calc scripts), but this is probably the reason why, I came across it last month. No idea if a recent version of the Flash plug-in for Win2003.

  Or just use a browser (Firefox or IE. recent 8/9 on a client of work instead of working directly on the server

  Good luck!
  JM

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• Update Briefcase error message ' locate some files in the Briefcase have sync copies inaccessible. " Convenience stores are unable to find problems.

  Bugs in the Briefcase: 'sync Briefcase copy junior '.

  Laptop with Wndows 7 family Premium and Windows 7 Professional of office have full connectivity that I can see - network directory shows homegroup with Briefcase on the desktop; file sharing fully implemented. Update everything completely fails: error updating Briefcase ' locate some files in the Briefcase have sync inaccessible copies.» Convenience stores are unable to find problems. Rules for creating portfolio followed by help for towel.

  Hello

  I suggest you to see the link and check if this is useful:

  How to use the Briefcase feature

  http://support.Microsoft.com/kb/307885

  (Valid for Windows7)

  I hope this helps.

• Very Urgent... Update withsingle properties accounts dimension rules file

  I want to build a rules file that updates the properties of accounts like dimension (data storage, Consolidation, UDA, Calc to spend two, comments, balance of time, time balance Skip, VarReporting, CurrConv, CurrConvCategory) in the rule file.

  Well, you want to use a rule of charge of dimension to change/add properties.

  Is your question, "is it possible?"

  The answer is Yes.

  Make sure that in the generation of Dimension parameters you check ' allow property changes "If you plan on loading and changing member properties.

  Otherwise, it is difficult to know what you're trying to do.

  Kind regards

  Cameron Lackpour

• Cannot load a rules file in my application of HFM

  I've updated a rules file in my QA environment and I could load it without any errors in the application of IFRSQA.
  
  After I tried to update my HFM application in the Dev Environment by loading the same rule file in the application of IFRSDEV, but it returns an error. The two applications are the same except for the rules file. It returns the error:
  
  Processing load file...
  Analysis of the rules of Calc...
  
  
  
  An error has occurred.
  Error: 800456 8
  
  
  Journal:
  --------------------------------------------------------------------------------
  Load started: 11:43:56
  Number of errors: 1
  Number of warnings: 0
  
  
  {D29035D0-EE9D-4C5F-8C26-BADDFD225157}1-214721419306/22/2010 11:43:56 AMLCLVWHQX40CHsvCalculate.cpp18049.3.1.0.2385
  Charge ended at: 11:43:56
  Duration: 00:00:00
  
  I went to the HFM error log viewer and I saw this:
  
  {D29035D0-EE9D-4C5F-8C26-BADDFD225157}
  Summary of Message System
  Engine script VB could not be initialized
  
  Any clue?

  I don't know exactly what it is, but it could be related to rules that runs automatically when loading:

  Secondary entrance
  Void NoInput

  And I think (but I am not sure):
  Public constants or variables

  Comment on these sections and re-load.

  Are there errors preceding this one, as it is a secondary error?

  -Chris

• Creation of multiple dimensions with the rule files

  Hello
  Is it posible to create multiple dimensions using rules file. I managed to create 1 Dimension using the rules file, but I need to create two dimension using rules (customer and Distribution_Channel) file.
  Help, please.
  
  -Amit

  Hello

  You need the files in separate rules for the construction of separate dimensions.
  You can use the same metadata file well.

  So, you must create 3 files of rules for the 3 dimensions.

  See you soon
  RS

• Alert message "unable to locate the file to wait for mail.

  I use Ubuntu 14.04 OS. Mozilla Thunderbird is used for the e-mail client. Everytime I open Thunderbird, I get a warning message reading 'could not locate the file spooling Mail. " What is the cure?

  Your accounts must be set up as POP or IMAP, not coil is my guess.

  Most Linux distributions include a component of mail server Thunderbird guess works. Unfortunately, the reality is very few of them are really configures. Then, go to your account settings and remove account

• I need to locate the file one by one?

  Normally, I put the iTunes media files on my external drive. But recently, it connects more.

  When I try to recreate a link to it, all the music in my iTunes shows "!" and cannot be read. I need to locate the file one by one to make them available again?

  There are more than 2,000 + music in my playlist. Are there other ways to locate the whole folder at the same time?

  Thank you very much

  It should connect if he did in the past. is it possible that you renamed the drive or folder in the path to the iTunes media.  This, ny the way, is one of the reasons why we suggest to keep a whole library on an external media player only.

  If you find an iTunes file should offer to find others as long have you let iTunes organize media in the past.  If this does not work then probably something got renamed on the disc.

• My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files. Help, please.

  My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files.  Help, please.

  Hello

  1. when exactly you get this error message? While trying to install service pack 3 or while trying to install a windows update?
  2. What is the full and exact error message?

  Please answer these questions and tell us more about the issue, it could help us help you better.

  See the bottom of the articles that might help you.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

• I updated to XP from SP1 to SP2 and rec'd an investigation re firewall to block xrxfptlt. I can't locate any file containing this sequence

  Original title: what is xrxfptlt?

  I updated to XP from SP1 to SP2 and rec'd an investigation re firewall to block xrxfptlt. I can't locate any file containing this sequence, including any system or hidden files. A search in the registry also has given no result for this combination of letters. Does anyone have an idea?

  Hello

  You are probably referring to xrxftplt.exe. xrxftplt.exe is located in a subfolder of "C:\Program Files".

  XrxFTPLt.exe file is a Windows core system file. The program is not visible. Start the application at Windows startup (see registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run). Program has no file description. The file is a reliable file from Microsoft. The program uses ports to connect to LAN or Internet. XrxFTPLt.exe is able to connect to the Internet.

  However, some malware camouflage themselves as XrxFTPLt.exe, particularly if they are located in the folder c:\windows or c:\windows\system32. Check the XrxFTPLt.exe process on your computer either on the pest.

  I recommend that you use the Microsoft Safety Scanner to run a full scan on your computer to verify if this is a malicious file.

  Note: You may lose any infected files by eliminating malware.

• Tried to install iTunes 10... error message... couldn't access network location \common files\.

  Hi, I have really not much about computers, I'm sorry. I tried looking for answers myself but I do not understand much of the language and I don't know if I read the appropriate information.

  I wanted to update my iTunes on my computer (Windows XP) but it doesn't seem to work when I searched for upgrades and click Yes, I want to update. Nothing happened.

  So I uninstalled my iTunes and I tried to install iTunes 10. But when I did, I got an error message with the title of iTunes + QuickTime... say... couldn't access network location \common files\.

  I uninstalled QuickTime, hoping that would help, but of course not knowing what I was doing. It did not help.

  What I Googled, it seemed I had to look at something in the term. I arrived at the spot but have not seen any obvious errors. But then again, I had really no idea what I was looking at!

  I would really appreciate if someone could help me with a language very very basic.

  Thank you very much.
  -Emma.

  It is a Forum Vista, not XP one, maybe you should try this Forum because there will be more applicable to your operating system.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  See if these items are easy to follow?

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7 (also for the links of XP).
  http://support.Apple.com/kb/HT1923

  Internal error: failed to get the path of the file directory common 64-bit
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/dc02d25a-E26d-4F74-a8d0-73858b5a0d07

  If you read the link above here is a relevant .jpg of XP
  http://CID-db58e4a03b3dccab.Office.live.com/self.aspx/public/current%20XP.jpg

  Have you tried the Itunes forum to see if there are similar stories there?
  iTunes for Windows
  http://discussions.Apple.com/category.jspa?categoryID=150