Mark randomly points...

Similar Questions

• Is it possible to pick up random points in the specific region of the image?

  Hello

  I do image analysis. I came across a problem. I want to take a random 8-bit image point, that I'm processing. But I have more than a single constraint: the point must be in a particular region in the image. Is there any diagram can be used?

  Any advice is welcome. Thanks heaps.

  (for example in the attached picture, is it possible to select the points randomly in the black area? Because, I mean, you take more 1000 points at random in the image, I need all of them are in black areas.)

  Jian

  A simple way is just to generate random points and check if they are in your particular region.  Something like this:

  

• I was working on a microsoft word doc and all of a sudden all paragraph marks and points between each word that presented themselves. How can I get rid of these?

  I was working on a microsoft word doc and all of a sudden all paragraph marks and points between each word that presented themselves.  How can I get rid of these?

  You click the Show/Hide in the Standard toolbar.  The location of this button may vary depending on the version of Word that you have (that you did not state).  Click the button again to make the marks disappear.

• Script of CS5.5 (MAC) to set random points in the analyses of lineart

  Hello.

  In my area, I often scan documents one text for offset printing. Most of the scans is clean, but in the end, there will be random points that need to be locked. I'm looking for a way to streamline this process.

  I could find a solution I had in mind, but to convert the lineart scan 8-bit first. The example can be found at: http://verlagmartinkoch.at/software/cleanup/index.html

  However, everyone has heard of an action or a javascript that could do this without having to convert them to grayscale, then returns to lineart?

  I read dozens of posts and DIY guides, which suggests to always do the black and white scans in grayscale and convert them then, but without going into huge detail, I will say simply that the scans I get will result like lineart.

  Thank you very much

  Colly

  I created plugin for this

  feel free to use it:

  https://DL.dropbox.com/u/167681/ReprintMaster.plugin.zip

  Unfortunately filters do not work in drawing mode, so you don't have to first convert them to grayscale image. but my plugin is free unlike that you mention in the startpost and works on mac - one mentioned is windows only)

  It should not be a problem, just to record action that converts in GS, called my plugin and then converted lineart

  If you work on RGB/CMYK - you will have to treat each channel separately, I code again.

  Gross white/rough balck option does not take into account pixel diagonal connections

  before - after

  

  Here's a quick demo

  

  

  (plugin is 32-bit only, will update soon CS6)

• 5 d mark iii points AF (concentrate) is displayed on the LCD

  On my 5 d mark iii, I can only see where are the autofocus points, but not those that focus.  Is it possible to see which points are under discussion?

  On "the AF screen during the update" you might want to swtich it to ' selected (constant).

  "Selected (Focused)" said they light briefly to show you what she won once he finishes with a focus, but they leave immediately.  The mode "selected (constant)" leave them on.

• Not random point of random web app

  Hello

  I'm trying to get a popup to display a random web item app when the page opens, but every time I refresh the page displays the same point. Does anyone know why this could be implemented?

  http://www.fortheloveoftravel.NET.nz/

  Thank you

  Hi Pierre, I'm having the same problem, so I contacted the support and that's what they said:

  «Good as I tested the same at my end and discovered that, the images change but they're after a time interval of 3-4 minutes...» Refresh the page and then wait for 3-4 minutes and then refresh, would change the image. It is a behavior aside server to optimize the use of the server. »

  Sucks, but they also said that it is not editable.

  Hope that helps.

  Cheers, San

• Random points forming a shape

  Hello

  I am trying to create an effect where I have a random collection of points in all senses that come together to form the shapes of the six countries on a map that to change to form a number subsequently.

  Is this possible without any kind of plugin?

  Thank you very much

  Of course, it is. Anything manually organize and animate the points to the use of shape layers with repeaters in the use of effects such as dance, Action Ball CC card or even good old playground of particles...

  Mylenium

• RoboHelp marking random subjects for deletion? (RoboHelp 11/TFS 2013)

  Hey people,

  My team and I run into a small question which I assume has something to do with RoboHelp, but maybe it's our version control system. We do not know.

  From time to time - may be once a week, sometimes more - RoboHelp insists that we try to delete topics, usually when we do a "Get Latest everything." It is usually the same subjects, but sometimes new topics are added. (The current list about 10 turns). Cancel us this request, so I go in TFS to roll back any pending changes.

  Steps to follow:

  (1) open a project related to TFS.

  (2) a "getting later all the»

  (3) to display a pop-up asking if we want to check in the changes on the files being deleted. Click Cancel and continue the process of Get.

  (4) close RoboHelp.

  (5) open the TFS. See all these files have a "Delete" pending change and are pulled by the current user.

  (6) in order to solve this problem (until next time), cancel us pending changes in TFS.

  At this point, if it happens to a member of the team, it will happen to all members of the team that affect this project. We all get the message 'Remove', we all have to undo this deletion, and we must all go to TFS to roll back these changes, which are invariably attributed to the one who has the problem right there.

  Note that this happens not always in step "Get Latest everything." There are times when we do a "check all".

  This could be the cause? How do prevent us this?

  TIA

  Have you enabled the option always erase the DTCS before opening? (Tools > Options). It may be that changes in FPJ files due to the GET all is the cause.

• Value mark floating-point color selector

  I managed to hack my way through a functional 32-bit plugin but have encountered a stumbling block.

  I need to interview a color picker setting and apply its values to a 3d point parameter. However the value always returns as 16pbc (range 0-255).

  In After Effects, the color is stored properly, it is obviously just read as a 16pbc in my code.

  Here's how I approach it now (inside UserChangedParam()):

  If (which_hitP-> param_index == _PICKER MATTE) {}

  params [MATTE_POINT]--> u.point3d_d.x_value = params [MAST_PICKER]-> u.cd.value.red;

  params [MATTE_POINT]--> u.point3d_d.y_value = params [MAST_PICKER]-> u.cd.value.green;

  params [MATTE_POINT]--> u.point3d_d.z_value = params [MAST_PICKER]-> u.cd.value.blue;

  params [MATTE_POINT]--> uu.change_flags = PF_ChangeFlag_CHANGED_VALUE;

  }

  In this thread (Re: CCU make example 16-bit/32-bit) I saw the reference to PF_GetFloatingPointColorFromColorDef(), however I can't seem to find any documentation on this particular function.

  Any help would be amazing.

  Thank you.

  either:

  PF_PixelFloat fp_colorP;

  () PF_GetFloatingPointColorFromColorDef

  in_Data-> effectRef,

  params [MATTE_PICKER],

  (& fp_colorP);

  or

  AEGP_GetNewStreamValue().

• What is the cause of the movement of the erratic cursor at random points while typing?

  Most often occurs when you type in Word 2010 and emails, but also occurs just by filling in the fields of online forms.

  Most often occurs when you type in Word 2010 and emails, but also occurs just by filling in the fields of online forms.

  Using a laptop? If so, you are probably accidentally brushing your hand against the touchpad while typing.

• IPhone will randomly go no Service when it is locked

  Sometimes, when I have my iphone locked 5s, the service will say 'No. Service' and then when I unlock the phone it comes back as "AT & T", why this is happening? I usually great service in my area also.

  A question, where are you located? It seems that AT & T has done a few upgrades network lately. I read on the forum here of a user having problems on the market of Portland, in Oregon, and I experienced a few problems in the Chicago market. You can check with AT & T or you can use their app on the phone, marks the point to send information to AT & T on the problems in a certain place.

• DV7-2170us random beep

  I have a laptop HP DV7-2170us.  I never had this problem before, but lately, every time I start a game, or any other random point when his cheek I hear a BEEP NET and disruptive.  At first, I thought that it was a sound setting in the Panel that is assigned to an event, but I went through all the system sounds and not one sounds like this strong and unpleasant beep I hear whenever I start a game.  It's just a single beep, but a second beep sometimes happens in quick succession.  It looks like a piano tone. Sometimes, when some of these beeps occur, the system freezes completely, which is unacceptableas as far as I am concerned.  This laptop is brand new, a little more than a month.  I'm in the middle of Africa at this time, so send the laptop in for repair is out of the question.

  The thing that I tried to solve this problem:

  -Remove IDT audio drivers and their reinstallation of drivers on the HP site.

  Without success at the moment.  Has anyone else experienced this problem?  Even if your laptop model is not the same and you have a resolution, I'd be willing to try.

  Solved! I thought it's only fair to share my solution.

  I installed Vista SP2, end the problem.  Weird huh.

• How to find the time to what zero crossing point occur using zero crossing vi

  Hello 
  Im trying to find the time to the point of inflection of a Bio-Signal with the 2nd derivative, then detecet the point of zero of the derivative signal
  What I need, is to mark the point of inflection on my Bio-Signal at the point where the derivative signal crosses the zero.
  

  The second has two scales on the graph, one on each side.  The first has only a single scale. I do not change the name of VI, so both have the same name.

  Lynn

• PageWide Pro 577 HP MFP: HP PageWide Pro 577 MFP Printing with random pimples on some pages

  I have two problems with my new MFP HP PageWide Pro 577 eventhough I later installed the drivers and firmware:

  I printed more than 1,000 'professional' and a few pages of quality 'Présentation' on this week less 2 NEW printer.

  1. I believe all > 100 printed pages with a size of random points about 1 mm round shape appear anywhere on the pages - sometimes few of them on the same page.
  2. Unable to print PowerPoint presentations - I need to create a PDF file and print it out.

  What gives?

  Thanks in advance.

  Hello

  I think that this problem had been resolved as a problem of quality of paper.

  Thank you

  TalalPWS

  HP employee

• Windows Vista slide show begins in random order

  Original title: Windows Vista slide show Question

  I have a file of several slides that I would show as a slideshow; but when I select all slides and start the slide show, the program does not start with the slide number 1... It seems to start at random points in the show, rather than in the order, I arranged them.  Why?    What can I do so that he can play the slides in their display order?       Try to correct: I have numbered slides in the file, thinking the show would start with numbered '1' slide at first, but the show always starts somewhere other than the beginning...  What should do?   Could someone inform me please?   Thank you very much.

  Just put a number in front of any name isn't going to be enough to get him to play in any program which is yet to win here because you always said what type of program and your help.

  You must rename these photos, 001 / 002... with nothing from the former name of the left, otherwise, it just reads the number the higher the rest of the numbering name or generic.