Master repo, Repo and installing the ODI

Similar Questions

• How can I download and install the latest version of Safari without having to install the current operating system?

  I just bought a MBP of 2013 (MacBookPro) renovated with OSX 10.9 (Mavericks) and want to update my Safari (version 7.0.5) the latest version of Safari. I tried to download Safari from Apple's site, but he said that I would also install the current OSX (10.11 El Capitan) as well. I want my MBP to stay on OSX 10.9 (because it is the last operating system that supports Adobe Creative Suite CS6).

  Can someone advise me on where I can download ONLY the last Safari?

  Thank you

  Steve

  You cannot run the last Safari on Mac OS 10.9.

  It requires the latest Mac OS (10.11)

  You can create a new partition and install the latest OS above and use it.

  Then the Mavericks partition boot when you want to use Adobe Creative Suite.

• Removing and installing the RAM several times can affect to my Mac Mini?

  My little brother back RAM on my Mac Mini many times; but it remove the RAM properly and install it correctly

  Removing and installing the RAM may affect to my Mac Mini?

  Mac Mini (late 2012)

  OS X 10.11.5

  No, it should not affect the machine when the withdrawal/re-installing memory - correctly.

  My second thought about this - why it has removed/re-installed memory several times?  Trying to upgrade the drive?  change a component any?  repair?

  Materials only I 'played' were - SSD, adding second HARD drive disk with data doubling cable, insulating modular wifi/bluetooth, etc. and of course, the upgrade memory.  Once they did that, I got very little intention of reopening the mini - except air jet, clean the fan.

  Sam

• I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM

  54e24e0e-dfc4-466b-A347-4bd95536773e03-Jan-1312:30 AM

  22d351d2-6461-4F33-9FBD-6d31f769e73103-Jan-1312:30 AM

  8a8da99b-335e-43bb-AA12-4634aa0b431003-Jan-1312:30 AM

  A15bb095-aeb9-44E1-A79C-1a17cee207d503-Jan-1312:28 AM

  A few videos that use the Flash plugin contain a menu entry in the context menu that allows to disable hardware acceleration in flash player.

  To disable the mode you will need to edit the file C:\Windows\SysWOW64\Macromed\Flash\mms.cfg as explained in the knowledge base article protected.

  • http://KB.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3

  See also: how to solve the safe_mode of Flash Player for Firefox? :

  • http://forums.Adobe.com/message/4468493

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How to buy Markzware Q2ID and install the plugin

  How to buy Markzware Q2ID and install the plugin

  ask the developer > http://markzware.com/

• I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  You are welcome

• Closed shop of a friend. He gave me an iMac. I don't have the password. Want to just clear the machine and install the latest OS. Can someone tell me how to do this?

  Wipe the entire machine and install the latest OS without login password.

  The person who gave you the computer is supposed to have done this before giving it to you.  Restore the computer to them and tell them to clean the hard disk, remove all their information from the administrator.

• The food is just out on my Power Mac G5 2 .3GHz so it does not start. My question is, if I pick up another opportunity G5 2 .3GHz and install the HDD of my G5 will be a new start up as usual.

  The power just went out on my Power Mac G5 2 .3GHz and will no longer start up. My question is this. If I pick up another opportunity G5 2 .3GHz and install the hard drive of my computer it starts as usual? I just need to get the files on my computer.

  J.

  Yes, if the disk was not damaged.

• Impossible to download and install the latest versions to iCloud and iTunes. Whenever the download is finished, I get an error message and stops.

  Whenever I try to download and install the latest versions to iCloud and iTunes I get error messages.  Just like the download ends, I get an error message and the Apple installer stops the download. Then it shows that the new versions are available for download just aif I had never tried to do it in the first place.

  Try these direct links:

  • 12.3.2.35 iTunes for Windows (32 bit) (Windows 7 or later) - iTunesSetup.exe (2015-12-10)
  • 12.3.2.35 iTunes for Windows (64-bit) (Windows 7 or later) - iTunes6464Setup.exe (2015-12-10)
  • 12.3.2.35 iTunes for Windows (64-bit-for older video cards) (Windows 7 or later) - iTunes64Setup.exe (2015-12-10)
  • iCloud 5.1.0.34 for Windows (Windows 7 or later) - iCloudSetup.exe (2015-12-07)

  For more tips, see troubleshooting problems with iTunes for updates of Windows .

  TT2

• HP Support Assistant tells Me to download and install the same update

  I have a HP Envy 700-027c. Maintaining HP Support Assistant telling me to download and install a Cyberlink PowerDVD to sp63146.exe, even if I downloaded it, installed and rebooted my computer 3 times or more. I don't get no error on installation, then believe the installation have been successful.  Please notify. Thank you!

  18...

  Welcome to the HP Forum!

  You could try the following:

  Control Panel > display icon > programs and features >

  Scroll down, find and uninstall HP Support hasWizard.

  Restart your computer after uninstalling the existing version of the Support Assistant.

  Download and install the latest version of the HPSA:

  HP Support Assistant

  Restart / reboot the computer and log in

  =====================================================================================

  If the problem persists, you can try:

  • Open HPSA > click "updates and optimizations" (wording may slightly differ) >
  • Select them Updates settings and messages >

  Under ' how would you like to receive updated software and messages from HP?

  • Select in the menu dropdown:

  Search for updates, but let me choose whether to download and install them

  Always in the updates and optimizations >

  • Check / initiate a list of available updates >
  • If the offending hotfix package is still listed, then click on it (maybe right-click?) and a value of 'Ignore' or 'hide' this package

  > Once 'Hidden', the package should not display longer towards the top of the list of available updates.

  Comment

  In particular, it is the opinion of this Expert that you ban HPSA to download and install a BIOS update on your computer.  You should always, in the opinion of this Expert, look for the updates to the BIOS on the website of your computer and only download and install a BIOS update when the update is directly applicable to your situation or if you are having problems with your computer.

  For your reference:

  Troubleshooting HP Support Assistant (Windows 7)

  Good luck!

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts to help you.

• "do you want to download and install the software" hp photosmart c4200 series '? "

  I get this message on my mac running update 10.8.1 Mountain Lion - Software does not help. It printed correctly on 10.7. I can still access the parser. Any ideas?

  Hello

  Be sure to restart the MAc and Champagne for any change.

  If this help not try to reset the system pritning and then add the printer:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
  
  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the sign more and try to add the printer again.

  IF none of the steps above tdoes not solve the problem download and install the package below:

  http://support.Apple.com/kb/DL907

  Once installation is complete, open the system preferences > print & Scan and add the printer again.

  Thus also ensure the printer directly connected to the Mac, not by the bias of the USB or extention and a USB hub is not longer than 2 - 3 m long.

  Please let me know if any other problem,

  Shlomi

• LF161UA #ABA: HP download and install the wizard never ends

  Laptop HP Pavilion G7

  Running Windows 7 Home Premium SP1 all updates applied.

  Today, I got a notice from HP Support Assistant, that there was an update of firmware for my all-in-one HP Deskjet 3520 printer. I went to download and install the firmware that first downloaded and installed the HP download and install the wizard. Does OK no problem yet.

  The HP download and install the wizard then downloaded the firmware update and installed on my printer. The installed firmware version has been STP1FN1351AR. I know it's done installation for my printer has printed a page of the printer hardware information and now returned to sleep. However the HP download and install Assisitant still works. He says that's it 100% but he also says to install next to the progress bar. There is another open window called "HP Device Update" which has a progress bar that keeps to be full and then starts all over again, he seems to be in an endless loop.

  I'll close these two windows but he thinks someone from HP should know what is happening with their program to download and install the wizard.

  I am including a screenshot of the two windows so you can see what I see.

  George-p wrote:

  Hi @RayGo75 ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about this here.

  Kind regards
  George

  Well well for almost a year that I posted this and no HP never contacted me for more information. I now use windows 10 then is no longer a problem.

• Need help to find and install the game Chess Titans Windows Vista for XP

  Need help to find and install the game Chess Titans Windows Vista for XP

  Hi SBOYDC130guy,

  We will not be able to install titan of failures on windows XP because it is designed for Windows Vista and Windows 7 and it's built-in game.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments