Mavericks Guest OS resolution resets restart

Similar Questions

• CUCM: Roles and permissions for Reset/restart of the phone or apply Config

  Can someone tell me what the authorization must be added to a role to allow a user to this role of restart/reset (or apply config - same thing really) a phone device?

  The popup once you press reset/retart or apply config shows just "user is not authorized to access this page."

  Thank you

  Ben.

  Hi Ben,

  What is your version CUCM? you use any custom for these end-users role which reset/restart?

  If so, please add privileges to read/set up-to-date for the resource ' Voice Mail pilot web pages "to the custom role and check.

  Please check this bug ID: CSCug29903

• Monitor resolution resets after restarting Vista

  This is happening a lot now, I start my computer and my resolution is off.  I'm in my nvidia Control Panel and switch back, but next time I turn it on it came back to the same problem.  Anyway I can get this to stop?  I left vista load its own driver and he said correctly installed and everything but I don't think that this was the case because of this problem.

  Hi myemptys,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/00e6a7bd-d4ed-4BE1-9080-92b5653a9a5f

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Screen resolution Reset

  I accidentally put my screen resolution to something too high, and the monitor now displays a message that says "beyond the limits". I tried to start safe mode and restart, but the monitor who always says. What can I do?

  I accidentally put my screen resolution to something too high, and the monitor now displays a message that says "beyond the limits". I tried to start safe mode and restart, but the monitor who always says. What can I do?

  Put the screen resolution
  http://www.Vistax64.com/tutorials/84291-screen-resolution.html

  Re-set DPI scale

  http://www.Vistax64.com/tutorials/84233-DPI-scaling.html

• Mavericks GUEST on VMWARE fusion 6 Mavericks operating system host

  I want to install the Mavericks as a guest under VMWare fusion test OS / X Server and guest will be a customer.

  Now, my problem is that even if the installation goes very well - when it comes to anything keypad entry works.  I can type, but no characters appear.  Outside of the machine virtual all works well.  The mouse works fine in the virtual machine.  I can even 'free' the mouse using control - so I know the keyboard does something, but I can't type in the virtual machine.  What can I do or check this?

  I don't want to cancel the installation from the beginning and I need the keyboard to the original user of the installation.

  Thank you

  I deleted and did the installation again and I used the keyboard for all navigation across (could whereI) and things seem to work fine now.  Quite strange.

• Excessive I/o, Ubuntu Maverick, guest host of Windows 7, both are 32-bit

  Hi all.

  I've invited Windows 7 SP1 (with the latest updates) installed on a virtual machine hosted on Ubuntu Maverick. The hosts and guests are 32-bit operating systems. When the customer is running the system carries out a large number of e/s (the LED of the disc is very bright) same for answers and small farms slowly. Doing something heavier, such as from Visual Studio or MS Expression Blend inside the guest takes about 5 minutes. Opening a XAML file or build my solution also takes enormous amount of time.

  I cloned the virtual HD and he ran under VirtualBox, and it does not display these problems, then I think that the problem is somewhere in the configuration of the VMWare VM. I would like to take advantage of ability of VMWare to accelerate 3D graphics, so I have to stay with VMWare. Everyone experienced these problems? All solutions?

  Some info from the host:

  Core i5 520M

  4 GB of RAM (I have a PAE kernel, then he can access all this)

  Ubuntu Maverick (10.10)

  Hard drive 500 GB, 4500 RPM. A 277 GB free.

  News comments:

  2 virtual processors

  2 GB of RAM

  100 GB virtual hard drive (not not previously assigned)

  An another 10 GB, preallocated virtual hard disk for the windows swap file

  I also added advanced options that I saw in another site, which may solve the problem, but they did not help (and has not done anything worse still too). You can find them at the end of the VMX file attached.

  Oops - you're right - I misread
  numvcpus = 2
  cpuid.coresPerSocket = 2

  If you had 4 cores,

  numvcpus = 4
  cpuid.coresPerSocket = 2

  on the reduction...

  a vmdk healthy does not have one of this entries in a vmware.log

  READ command (10) took 3,173 seconds (ok)
  READ command (10) took 3,246 seconds (ok)
  READ command (10) took 3,206 seconds (ok)
  READ command (10) took 3,618 seconds (ok)

  eaither shrinkage is long - or something is wrong with your disk system

• Screen resolution reset after plugging in the tv

  A month ago, I plugged my Dell Inspiron N7110 with Core i5, on TV using HDMI cables, the computer prompted me to change the screen resolution of 1600 x 900. I think the original was 1280 x 720. Now, he won't let not get back together with making my screen is really small and I have the flashing in menu boxes (I can hardly read, they Flash so fast) and my computer will not pages refresh, I have to do forced refreshes. I deleted the cache and still do, but the problem is getting worse. I use the Safari browser and microsoft security essentials. One had it wrong before or know what is causing all this trouble?

  Unfortunately none of them worked. My driver is Intel HD family family, was not microsoft Basic. The second suggestion, even happened as when I do it in the menu screen resolution box, my screen is shrinking. It was before the connection to the TV and full screen on a lower resolution.

  Thanks for all your suggestions H.A.V. Aravinda, we appreciate it.

  Thanks for the update...
  Have your tried to update your existing video/chepsit drivers?

  Download your video driver and the most recent update and let us know the results
  http://www.Dell.com/support/drivers/us/en/04/product/Inspiron-17R-n7110

• The button Reset/Restart or script

  Hi there, here once again with another Captivate 5 questinon Martin

  Im still struggling with my new project. I have prepared a few projecst of training mode for my colleagues... There are some slides with clickboxes that are part of the Quiz (awarded with points).

  I have to, somehow, after finishing project as a whole (in the end he is seen blade from a Quiz with max points, accuracy etc) Add button or script to restart the project (points to erase and restore the settings of clickboxes) for the user to be able to resume full training project.

  Can you help me? (standard quiz "button recovery" does not work)

  Thanks, Martin

  You mention that you have added the button Retake Quiz in the Quiz results slide, but attempts how have you allowed for the overall Quiz?  Have you added the button return to by setting the user allow multiple attempts at the Quiz: switch failure of dialogue screen, then click on view button back?  Or you confuse the Retake Quiz button with the touch of revision Quiz?  The names are very similar and easily mistaken at first glance.

  If you have your quiz the value that one attempt (by default), that it does not change the score, even if you do not have the buttons allows 3 attempts.

• Resolution of display on all guests problem

  Hello

  I've been using 6 merger for some time, since the first preview release. Works very well.

  Yesterday, however I made the mistake of upgrading to the Mavericks, had to do anyway right?

  Background information:

  My setup is a mid-2012 Macbook Pro (no retina) with an external display, where I put the external display to the mirror of the screen of laptop, external keyboard, external mouse so that my laptop is my work station. All guests are normally the installation program is running in mode full screen. Again works very well, have used the Setup program for the years.

  My eyes are bad enough, so on the large external display, I use normally 1024 x 768 as a resolution of the screen, which worked very well over the years.

  Enter the Mavericks. This no longer works and Fusion 6 is not more help.

  Said Mavericks my laptop screen now has the ability to 'Better' - which translates as 'Worst' for me or the alternative is the scaling options:

  1440 x 900

  1280 x 800

  1024 x 640

  missing in action here is... 1024 x 768

  Mavericks now says my external screen can do:

  1600 x 900

  1080 p

  720 p

  I reflect the screens, another screen will simply match either what I choose as my main screen.

  I've tried almost everything. As you can see the internal display in fact there a 1024 x 640 that comes close, except that - in the windows at least - you will meet many applications that no longer corresponds to the screen as on all developers assumed that you have at least 1024 x 768 to work with.

  Hmm...

  In the long run, finally I found that most of the above is to use the 720 p resolution.

  However for windows which resulted in 1280 x 720, as a resolution of the screen and that is a problem.

  By train across the windows up to 1024 x 768 gives me black bars on the left and right side of the screen.

  Restart the guest with resolutions makes to force himself to 1280 x 720, seems the guest himself to take the host screen resolution requires.

  In older versions of workstation and the player could change the screen resolution you want to use. It seems that nowadays it no longer works. I tried some vmx settings, but without success so far.

  Tips are welcome.

  PS: No need to me with trick 'buy a bigger screen' I sat close enough to the screen and move my head up/down all the time to oversee the entire screen is not very ergonomic.

  PPS: I am currently using windows functionality to enhance the text fonts all 1280 x 720. He "kind of" works, but it is a gross workaround as many applications that I use do not know high DPI.

  --

  Wil

  Wil Hey!

  I found a few forum messages discussing the magical things that Mavericks will do when the user holds the button Option/Alt key while doing different things in the view of system preferences pane.  Try to maintain the Option in the selection "Chipped" or hosting Option and choosing "Detect displays"... see if either of those who get your favorite resolution back and avoid having to reconfigure the merger.

  (Sorry, I don't have a setup of Mac multi-monitor I can try it with, so I write just that - is and crossing my fingers that this might help.)

  Good luck!

  --

  Darius

• The DPI resolution keeps reseting itself at the lowest dpi at startup

  When the pc starts, it looks like it is loading fine then shuts off again and opens upward with the CIO of new resolution reset to the lowest... We have been adjusting and hit apply whenever we want back on the pc... I tried adjuting it over and over and he returns to the top start up...  Any help on this issue would be greatly appreciated...

  Have a nice day

  Hello ronlet,

  Looks like you may need to download a video/chipset drivers. You visit the Web site of the manufacturer of the computer to download for your make and model of pc. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Restart the console management network... affect guests?

  Hello

  I just wanted to be sure before we do anything. On my server ESXi, I have 2 network cards dedicated to the management of network and vMotion. 2. separate the interface network cards dedicated to guests. If I restart the network from the management console it will affect the virtual machines running on the host. I'm assuming that he used since they use different network adapters, but I wanted to be sure.

  Thank you.

  Hello

  You're right, restart management network do not affect any computer virtual

• My iPad opens more, even with a reset...?

  Even if I reset my iPad with two buttons, only the Apple appears for 10 seconds it turns its back on black... She used to freeze, but he always returned after a reset.  Now, no more... iPad 2

  If the article of support cannot provide no signs of activity, you may need

  to be considered an authorized Apple service provider specialist.

  • If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support

  • iPod lights - Apple Support

  Depending on your situation, it may or may not be an official Apple retail

  Store with genius; You can find a service Apple authorized service provider

  who has access to parts and expertise, that can test and repair.

  Independent repair places might be enough, when there is nothing else.

  However the items under warranty can be compromised in some cases.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • See all phone numbers around the world
  • Contact a mobile operator

  You may try to access or reset the iPad in conjunction with the computer.

  Several ideas and those repeated to occur with the use of the search engine; Word order and

  content to vary the results. Valid choices are not all, some may cause worse problems.

  https://DuckDuckGo.com/?q=ipod + towers + black + used + reset + restart& t = ffsb

  Another reset may involve completely re - as if you were to sell or give.

  Make sure you have a proper backup of the content elsewhere, always.

  • What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Good luck & happy computing!

• My iMac gets to halfway through to start and then resets

  Why won't my iMac 2011 27 in. mid start. My computer froze so I force quit and when I restarted the computer I see the logo of apple and the gray screen and it gets to halfway through start up and then resets / restarts and I get the chime and continues to do this like its stuck in a loop. Cannot access the apple hardware test. I have reset the SMC and NPRAM... nothing is still stuck in this loop. Can anyone help? Im running the latest OS X El Capitan.

  Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

• monitor screen size, it's on the largest resolution cannot be taken

  I bought a used laptop with Windows XP Professional. No matter what I do, including the amendment of the resolution of the screen, I can't see the screen to fill the entire screen.  I can't find any information on the web, other than corrections of screen resolution.  The computer is a dell 620 latitude.  Under the monitor, he said only: default monitor. More high resolution, I can go is 1024 x 768 bits of very high (32).  Help, please.

  Hi Bobbievin,

  Thanks for posting your question in the Microsoft answers Forum.

  Follow the steps below to resolve your issue with the screen resolution:

  1. Restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.
  2. From the options menu, select Safe Mode.
  3. Right-click on an empty space on the desktop.
  4. Select properties then settings.
  5. Select Advanced > adapter
  6. Click default map in the refresh rate list.
  7. Click OK and restart the computer in Normal mode.

  Let us know if that helps.

• How to set the lower screen resolution on HP Pavilion

  I'm trying to figure out if its possible to lower my screen resolution of 800 x 600 on my HP Pavilion Sleekbook 14 - b010us running on Windows 8. I need to do that; It is the only way that I can get my pico projector to run using VGA to HDMI - I tried it with my Sony VAIO and it works perfectly. The lowest setting that I see on my HP is 1024 x 768, and it does not work. Any help? Don't want to have to buy a new projector - this one works very well and the HP laptop has a VGA port

  I came across this same issue using the resolution option custom in the Intel driver manager and has had success using mode low resolution.  I had also edited the registry to force more options.  The registry change which resulted in several resolutions between 1366 x 768 and 1024 x 768, but nothing lower.  Windows 8 is not really designed for lower resolutions (at least, which is not the ideal targeted resolutions), so I guess that would be present on any standard notebook Windows 8.

  However, I have relevΘ this site today to make sure I wasn't overlooking anything... and it seems that I was.  I don't know how I didn't have to check the option advanced settings for more resolutions.  This approach does not require mode low resolution to restart, but it's going to require a screen resolution > avancΘs > list all modes to get 800 x 600 option each time you need.

  Let me know if this has answered your questions.