Restart the console management network... affect guests?

Similar Questions

• DCOM98 UPDATE AND RESTART THE OFFICE MANAGER

  PLEASE INSTALL DCOM98 UPDATE, RESTART THE DESKTOP MANAGER

  You have disconnected your Blackberry to your computer, then install the DCOM98 update and restarted your computer yet?

• How to disable the autostart (application) when restarting the server managed?

  Hi Ppl,

  How to disable the autostart (application) when restarting the server managed?

  I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.

  I don't find in weblogic.

  Thank you

  You can force stop the application before you restart the server.

  -Faisal

  http://www.WebLogic-wonders.com

• How to get the IP Address of the Console for all my guests

  How to get the IP Address of the Console for all my guests

  a simple...

  Get-VMHost | Select Name, @{N="ConsoleIP";E={(Get-VMHostNetwork $_).ConsoleNic | ForEach{$_.IP}}}
  

• Restarting the Service Management

  Dear team,

  I need to reboot an ESX host 4.0/4.1 Management Service before restarting the same precautions I need to take. Wil impact on any service or any VMs or network storage.

  Concerning

  MrVMware.

  There was a question earlier in a particular version of ESX (3.X to be precise). It has since been corrected with the following patch:

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1003312

  I can assure you this is no longer a problem with VMware ESX.

  PS: For the record, to close the message that you must mark responses as useful/correct.

• Restart the node Manager and activate the dynamic record... HOW?

  Hello
  
  Wi are installing an OBIEE 11 G Enterprise setup and have encountered a problem.
  We are told to execute a command called 'export JAVA_OPTIONS =-DDomainRegistrationEnabled = true' to restart Node Manager using dynamic registration. But he fails miserably!
  How we run this command? Any advice?
  
  Best regards, Jacob J

  This means that there is already a running process that is using the port.

  If you are running on a UNIX related you can use netstat, for example,

  netstat -ap|grep 5556
  
  tcp        0      0 edu-wls-rh:5556             *:*                         LISTEN      7836/java
  

  For more information on the process of 7836, you can use ps, for example,

  ps -ef|grep 7836
  
  oracle    7836     1  0 10:55 pts/2    00:00:12 /home/oracle/aqualogic/jrrt-4.0.1-1.6.0/jre/bin/java -classpath /home/oracle/aqualogic/jrrt-4.0.1-1.6.0/jre/lib/rt.jar:/home/oracle/aqualogic/jrrt-4.0.1-1.6.0/jre/lib/i18n.jar:/home/oracle/aqualogic/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/aqualogic/patch_ocp353/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/aqualogic/jrrt-4.0.1-1.6.0/lib/tools.jar:/home/oracle/aqualogic/wlserver_10.3/server/lib/weblogic_sp.jar:/home/oracle/aqualogic/wlserver_10.3/server/lib/weblogic.jar:/home/oracle/aqualogic/modules/features/weblogic.server.modules_10.3.3.0.jar:/home/oracle/aqualogic/wlserver_10.3/server/lib/webservices.jar:/home/oracle/aqualogic/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/oracle/aqualogic/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar -DListenAddress=localhost -DNodeManagerHome=/home/oracle/aqualogic/wlserver_10.3/common/nodemanager -DQuitEnabled=true -DListenPort=5556 weblogic.NodeManager -v
  oracle    7859  7836  0 10:55 ?        00:00:00 /bin/sh /home/oracle/aqualogic/user_projects/domains/base_domain/bin/startWebLogic.sh
  oracle    7984  7836  0 10:56 ?        00:00:00 /bin/sh /home/oracle/aqualogic/user_projects/domains/base_domain/bin/startWebLogic.sh
  

  In this case we see that the process 7836 is the node Manager.

• Check btn is disabled in the display manage attachments for guest users

  We observed that this (new) check-in button in a fixing solution eats is DISABLED in our UAT environment for users who do not have a specified group.

  However this restriction is not in our dev environment (IE everyone can check in documents in dev).

  Can you please ask us where is this deactivation is setup and how to remove it?

  WebCenter content Imaging Version is 11.1.1.9

  Found the fix,

  UCM, one of the "role permissions" did not appear in the UAT environment.

  Role AFWrite did not have the RW permissions.

• Second NETWORK card takes over the management network

  I have a lab of dev ESXI 5.5 on a Dell PowerEdge 2950 with a dual port GbE NIC (Broadcom NetXtreme II BCM5708).

  My basic configuration was a port of configured NIC (vmnic0) with a switch (vSwitch0) Standard.  vSwitch0 was a group of Virtual Machine (for VMS) ports and a VMkernel Port (for the management network).  Everything worked well at this point.

  When I try to configure the second NIC (vmnic1) to a different network switch port and different to connect to iSCSI, network range vmnic1 took over the management network even if it does not show as being the management network.  After that, I'm more able to connect or ping the IP of vmnic0.

  When you configure the vmnic1, I added connection Type of VMkernel.  I did not choose to use the port for traffic management group.

  When I look at the console and choose to configure the management network I see only being vmnic0selected network adapter.

  Am I misunderstood the management network configuration?  If not, does anyone have a suggestion on what may be wrong or how I can diagnose?

  Thank you for your comments!

  -Sean

  I think I knew what was going on.

  I had my VMkernel for networking (192.168.2.0/24) in a different subnet to the VMkernel for iscsi link port (192.168.1.0/24).  The problem was due to the existence of a network trace unidirectional from 192.168.1.0/24 to 192.168.2.0/24 (but not in the opposite direction). As stated in the post of the blog below and elsewhere, if there are two VMkernels in networks with a direct route, the esxi host will be simply choose one of the VMkernels to act as the management network (no matter if only one of the VMkernels has active network management).

  I thought my networks did not have a direct route because of the impossibility (192.168.2.0/24) management network to communicate with the network of liaison port iscsi (192.168.1.0/24) but because the 192.168.1.0/24 network may route to 192.168.2.0/24, he made the two viable VMKernels to act as the point of view of the host management networks.

  After that I moved the post iscsi binding to a switch with no network route, my problem has been resolved.

  Re-reading the following is a blog post that helped me to understand my problem.

  http://blogs.VMware.com/kb/2013/02/challenges-with-multiple-VMkernel-ports-in-the-same-subnet.html

  Thanks to those who took the time to review and respond to my problem.

• Intermittently after the reboot, the option "Hide when minimized" in the Task Manager Win XP is too effective; the CPU usage icon does not appear in the notification area. Sometimes restart heals, sometimes not.

  The Options menu of the Windows Task Manager includes "hide when minimzed ', to display an icon in the area of notification, but not on the traskbar. I leave that option checked all the time to control the percentage of processor; but sometimes without apparent cause, after I reboot there is no icon in the area. Is there a way to fix this?

  Hello ronks,

  Thank you for visiting the Microsoft answers community.

  The reason for which the icon is not in the system tray is because the Task Manager is closed not minimized when you start your computer. To do this, you could do the following:

  -Go to my computer > C: > Windows > System32
  -Locate in Taskmgr
  -Create a shortcut > right click on the shortcut > click on cut
  -Navigate to my computer > C: > Documents and Settings > username (your username) > Start Menu > programs > startup
  -Paste in the startup folder

  -Right click on the shortcut > click Properties
  -Less run > pull down the menu and select Minimized > click OK > close window

  Now every time that you restart the Task Manager will be launched in a minimized state.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I put/pin a shortcut to "manage network connections" in the start menu?

  The window "manage network connections", I want to talk about is one that can be found on the left side of the window "Network and sharing Center", placed under the heading 'Tasks'

  Manually open to this place...  All the way you want to manage the connections then.

  Drag the icon in the 'address bar' above to your desktop or start menu, or the taskbar, etc...  It will create a shortcut.

• Will be communicating with VTEP and NSX flow controller (for example the NAV VTEP) network vmkernel management?

  Hello

  I have question concerning communication with the controller VTEP and NSX.

  Will be communicating with workflows VTEP and controller within the network vmkernel management NSX?

  Alternatively, it empties the VTEP network? (Network VXLAN?)

  I think it is by the vmkernel management network, as ESXi host with controller NSX need not always have

  VTEP (or Logical switches) segment.

  I thought that it could flow within the segment of NSX controller if it is independent of the normal (communication of host of ESXi and vCenter)

  management vmkernel, but I think that there are restrictions which network of the controller must be in the same segment of layer 2.

  I tried to find some document but nothing of any document clearly states what network port group transmits VTEP and NSX flow controller.

  I'll be very happy if the experts give me answer.

  BR

  As far as I know: you're right - this traffic is via the host management network and a connection routed between controllers it is not currently supported with NSX - v.

• Unable to activate the management network...

  I'm new and VMWare VSphere and I tried to connect to a server with VSphere ESXi 4 but I kept getting hung up on the screen «Download tools to manage this host From...» ». I disabled the management network, hoping it would allow me to bypass the connection and enter the server, but he clung to the option 'download... Tools '. "the screen again, but this time with a 0.0.0.0 IP. I tried to activate the network again, but now I get the error, "Management Network Interface was not found". I don't know what this means and I'm having a devil of a time to discover.

  Hello

  The screen you see (yellow screen with 'download... Tools) is the screen of the ESXi server. to manage the ESXi server and the virtual machines installed on it, you need to connect to a windows box, navigate to the IP address (using a web browser) indicated on the yellow screen and then download the VSphere client tool, of course ensure your network working properly. The VSphere client tool will then connect to the ESXi and manage accordingl.

  Hope this helps

  James

• Unable to connect to the console of enterprise manager

  Hi all
  I have already give the grant option cnnect resource to scott, but it does not connect to enter the console Manager Oracle database 11 GR 1 material Inlet. I get this error when connecting
  "The application requires more privileges to database that you got currently. Click Help for more version specific information.
  
  When I give scott dba rights, then it connects.
  but I can't give rights dba to scott.
  
  so, how / what is the specific command to give scott permission to connect to enter the decision-making Manager console.
  
  Pls answer...

  Extreme dear,

  Please visit the following link;

  http://www.orafaq.com/Forum/t/85708/0/

  The answer is the role of select_catalog_role. You don't have to grant the DBA role to the user SCOTT.

  Kind regards.

  Ogan

• Host has no redundancy management network but it doesn't...

  Hi all

  Does anyone know if the host 5.0.0,469512 ESX configuration now requires two network adapters are associated with on Vswitch0 for redundancy of the network management?

  I created a separate console on a separate subnet vSwitch, attached to a separate physical network adapter on a separate switch, this can be contacted via TCP/IP and can evacuate in penetration.

  The features of network working on this interface.

  Use for network management is checked, and that's it for the vSwitch.

  It is using frames marked for the network in question and has thus a vlan id as it should.

  But I still get the warning, according to the article of VMware http://kb.vmware.com/selfservice/documentLinkInt.do?micrositeID= & popup = true & languageId = & externalID = 1002641 I only need to configure:

  Solution

  To resolve this problem, you can configure a console of additional service for redundancy. Have an additional service on a separate vSwitch console, linked to a different vmnic which is attached to a different physical switch, ensure that VMware HA does not power off virtual machines if the base of the console service network goes down. If the failure of the primary service console network, it continues operating using the second service console.

  This has worked well for me in 4.1 and 4.0, but does not seem to make the warning go away in 5.0. The questions are. I have something configured incorrectly? 5.0.0 WARNING only disappears if you have a Nic team on the main service console management vSwitch? Or is this a bug?

  Any information would be very useful.

  Concerning

  Ben

  Hit "reconfigure HA" on the host?

• Unable to connect to the console of the virtual computer after dns change

  I finished just change of my VM and VC servers esx hosts to use the new dns servers. In addition the area changed as follows

  from vm1.subdom1.xxx.com to vm1.subdom2.xxx.com the esx hosts and vCenter server all underwent this change at the same time although ip addresses have remained the same.

  In vCenter but I do not see "cannot connect to MKS: address for server vm1subdom1.xxx.com host lookup failed: no host is unknown.»

  If I log into the esx vSphere Client with server can't connect to the console where I can say vCenter to use the new name of the virtual machine instead of the old host? I can ping and resolve the vm from the vCenter server and RDP to DNS so it works but vCenter is still going to the old address.

  Any help?

  To access the Console of the virtual machines... the vCenter does not really rely on the DNS config. It communicates only through ports 902/903

  This problem could have arisen due to some misconfig while changing the DNS... .pls try below

  Remove and re-add the vCenter ESX Server

  Restart the ESX management services... #Service mgmt-vmware restart

  -All the best