Max Memory are not on specifications

Similar Questions

• New Shapren, noise, & memory are not an option.

  Hi there-

  All the imported images are under the process of 2012. * I tried to use processes 2010 just to see if the options will appear, but they did not *.

  Running Win 7 / 64 bit/12 GB/Core i7 / running as an admin - and NONE of the files are read/write only.

  In the 6 files that I imported, not a single image has the ability to adjust sharpness, noise, moire. Sharpness feature is longer than down in the base column, but - it that these cursors appear they not where it belongs.

  I saw them in the videos of Julian Kost as the last 3 sliders under the BASIC word in the mod to develop.

  If anyone can help?

  I still can't delete anything either. Wheter its with the delete NOR right click and using the option delete photos key. It just says: can not move or photos in the trash.

  And I have uninstalled and reinstalled 2 x already.

  Thank you very much.

  They are in the premises of adjustment.

• Last imported files are not in Lightroom 6 - unless I have Lightroom start by entering the memory card into the reader

  I encountered this problem a few times. Earlier I see the pattern more clearly, so that I can report.

  I imported a large number of files of several memory cards. The files are added to several files in my Windows - using Lightrooms import directory.

  After that, I made some sort / rating / editing etc. - a lot of work.

  Everything seems to be.

  But when I start then Lightroom newer forlders aren't in the LR catalog - records are not presented for me, the last import appears as an greater import at all at the time.

  New files are always hard disk - but seems to be "forgotten" by Lightroom - and all my editing etc seems to be lost!

  Only if I start Lightroom by entering the memory card in the card reader, which automatically start Lightroom, I can see the files and my new editing work in Lightroom.

  I tried several times with or without the memory card. The boss agrees.

  I checked: no data was written on the card during the import or change, so I don't understand about the effect of the memory card.

  I need help to understand and solve this problem.

  Your show screen says 5 Lightroom but your post title says Lightroom 6.  You have both installed?  Perhaps the fault is opened.  You show also 197 missing pictures. Just right-click one of them and don't 'Show in Explorer.

  

• Hello... I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other

  I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other credentials?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I want to enter the information specific to my camera and lens corrections lens P options'shop 2014 and 2015 the room but they are not on the list. (D-750 of Nikon with 24-120 lens). How can I fix it?

  I recently upgraded to a Nikon D 7000 to a D-750 with the Nikkor 24-120 mm, but they are not on the list of options in P'shop or Lightroom under profiles of cameras and objectives. Since every tutorial I've read on the suggested 24-120 lens fixing distortion problems in P'shop, how to make the choice without these specific products being on the list? (P'shop, 2014, 2015 the room)

  In Lightroom, have you tried the automatic correction of profile? In addition, I don't think that there are and the support profile of correction for digital SLRs so you shoot JPEG.

  Benjamin

• Specific preferences are not save

  Cookies settings are not saved.

  Since around August 22, 2014 my cookies settings are not be saved; After a browser restart "do not accept cookies" setting always happening to "Accept cookies from sites" and "accept third-party cookies: never". This is the only setting of preference it is not saved and versions prior to August 22, 2014 (or about) my cookies settings have been saved.

  Around this date, I chose an option in the program 2.4 Spybot-SD ( http://www.safer-networking.org/mirrors/ ) for 'third-party cookies should never be allowed', maybe that's what changes my settings, but maybe it's something else. There is no option in Spybot for inverting the selection.

  I contacted Spybot but many of the suggestions and changes on my system later the remains of the question, and Spybot gave up.

  I don't have any installed programs that are known to force Firefox to use parameters, as shown in https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save .

  So far, I have:

  -on the URL about: config, change the value of network.cookie.cookieBehavior to 2,
  -delete all lines in the user.js file,
  -uninstalled Spybot completely,

  but none of these things have solved the problem.

  I do not want to reset or reinstall Firefox unless it's the last option. Please let know us if there is another option to solve this problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• My WIFI and 4G are not work with specific applications, even though I have access to both?

  After the new update, the applications on my phone are not connected to my 4G or WIFI network home. I tried to reset my phone, but the problem persists. I am still able to call and text, but it's using my data even when I'm at home. I don't know how to solve this problem. This would have something to do with a new application that has appeared in my settings: (null)?

  Hello Mia,.

  I understand that you are having multiple problems with your applications and data connection. You also see an option to Null in the settings app. For me, it looks like you need to restore your iPhone. Let's go over how to do this and then sync thing back above.

  I would like to start with updates on your iPhone. It will be particularly to the research in the App Store, as well as in settings > General > software update. If it's all the goo, then you want to transfer iTunes purchases to have a safe copy of them. Once that is done, is to reset your iPhone in settings > General > reset > erase all content and settings. Let it finish and then start downloading or synchronization of the applications one at a time to test. If it works, you can speed up and synchronize the rest of the file content.

  After erasing and setting up as a new device, your device is now in a factory setting. Try again what you were trying when you first found the question to determine if erasing and setting up a new device solves the problem. Contents of the device could have caused the unexpected behavior.

  • If the problem persists, you can contact the Support technique Apple.
  • If the problem is resolved, a type of synchronization of content both on the device. For example, if you had a problem reading music, add songs to iTunes and confirm that they will play. If your contacts have not been loaded successfully, you can add contacts to the rear. After each sync, test to see if the problem is back.

  Take a look at the article below to learn more in-depth details on how to do this.

  How to clear your iOS device and then set up as a new device or restore from backups
  https://support.Apple.com/en-us/HT204686

  Take care

• Why the acquired data are not from min to max (DAQmxCreateAIVoltageChan, PXI-4472) values

  Hello

  I'm developing a program for the PXI-4472 acquisition on opensuse 11.4 device (linux 2.6.34).

  I try to acquire analog data and to read in a wav file.

  Configure the task of acquisition with the following functions:

  DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","OnboardClock",DAQmx_Val_Cfg_Default,-10.0f,10.0f,DAQmx_Val_Volts,NULL);
  DAQmxCfgSampClkTiming(taskHandle,"",48000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,48000);

  DAQmxDisableStartTrig (taskHandle);

  I don't understand why the data stored in the wav file are not-10V,-10V but-5V, 5V... (the value of the gain is 0dB). (Perhaps a scale of 0.5?...)

  Thanks for your help,

  Amandine

  You're right, in my example, I considered as unsigned data.

  Concerning

• IdeaPad 710 S-13ISK - 80SW003NGE / / there a RAM slot, or the memory is not expandable?

  Hello!

  I am planing to buy a new laptop computer and found the 710 s-13ISK (80SW003NGE) interesting. There are 5 different configurations, with different processors and amount of memory. The least expensive is the only one that I could afford it, and there the lowest CPU i3-6100U, which is not matter at all, but it has only 4 GB of the DDR3L. I want to buy this one, but only if I am able to upgrade memory one day to 8 GB, where the 4 GB are not enough for my usage scenarios.

  Unfortunately I can't find any specific information, whether the mother card features a RAM slot (so the 4 GB might be replaced by greater 8 GB), or memory is soldered directly on the motherboard (it is not replaceable).

  Someone has this particular laptop and could give me some feedback on this one?

  Thanks much, much in advance!

  I found this link to a site with a review on this model and it added to my previous post, and it seems that the RAM is indeed on board and is maxed out at 4 GB

  This sheet of sites seems to confirm that the RAM is welded on board.

  http://ICEcat.us/us/p/Lenovo/80sw003nge/laptops-notebooks-33134032.html#

• Taken Max memory supported by HP G62-b50SQ.

  Hello.

  4 months ago I needed a laptop, and my choice was HP G62-b50sq. I am happy with my choice, but it came with only 3 GB of memory, and it is simply not enough for me.

  I read a lot of reviews and specifications of this particular configuration, and in each of them, he says that the accepted maximum memory is 4 GB. Here's the question: why? The processor P6100, then it has a controller integrated DDR3-1066 memory and it supports 8 GB of RAM, so why this particular cell takes in charge only half? Or there is not enough physical space for double side slots inside to adapt?

  Thank you.

  Specifications:

  HP G62-b50sq

  Intel P6100 @ 2.00GHz

  3 GB DDR3 - 1066

  ATi Radeon 5470 512 MB DDR3

  Seagate 500 GB HARD drive

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02542102.PDF

  There is conflicting info on the product specifications page and the service manual.

  State of care product max is 4 GB.

  Service manual says max is 8 GB (2 x 4 GB).

  My advice:

  Download and run the free memory Crucial Analyzer.  That will tell you how much memory you can install on your laptop.

  http://www.crucial.com/systemscanner/

  I'm sure he'll come back and tell you that you can install 8 GB.

  If for some unforeseen reason it does not work, then you can still play and buy a 4 GB chip and install it and see what happens.

  Chips 4 GB DDR3 are not too expensive (under $ 20.00).

  Paul

• Satellite L755D - Web cam/mic are not detected by Skype

  Good evening everyone,

  I just noticed that when I install and open Skype, my built-in webcam and microphone are not detected by the application. He has worked in the past, but I've not had to use Skype for more than a year, so never noticed until now.

  I checked the Device Manager and there is no webcam or microphone listed. I tried to search for new hardware, but it found nothing.

  Specifications of systems:

  OS: Windows 8.1 Pro
  Processor: AMD A8 - 3500M
  Memory: 8 GB of RAM (2 x 4 GB Kingston sticks)
  HARD drive: 750 GB Seagate Barracuda
  The version of the BIOS: Insyde Corp. 2.10 (28/06/2012)

  If any other info is needed to help diagnose and solve this problem, then please ask and I will provide.

  Thank you very much

  Michael

  I guess the laptop not was not preinstalled with Win 8.1 but updated you the Win 7 system to Win 8.1.
  Is this correct?

  I m application because it would be interesting to know if the webcam worked correctly using Win 7.
  The driver for the webcam using Win 7 to be installed to get the webcam recognised.

  To help to win 8.1 additional webcam driver is not necessary because it s already part of the Win 8.1 System. That is why the webcam should appear in the Device Manager without installation of the webcam driver.

  However, some models of laptop supports additional webcam POWER setting in the BIOS.
  Please check this option in the BIOS.

• Dv6t 2000 CTO Entertainment Notebook with i7 processor 72QM to Max memory upgrade?

  I have a dv6t with i7 720 m build processory about 3 years ago. I think there clarksfield CPU. I have a 2 x 2 gig installed for total of 4gig from the original version.   I wonder (assuming that Win 7 64 bit family premium that takes in charge until 16gig), this laptop only supports 8gig?  I ran a tool and it has a reference to logic/Chipset memory banks maximum installable memory of 32gig and a reference to the controller memory memory install Max 8gig.  So, what gives? The laptop will support the sticks of memory 2x8gig or just the sticks of memory 2x4gig?  The laptop DV6T 2000 CTO Entertainment.  If it supports 16 gig, I would just buy one of the sticks 8gig rather than 2x4gig. And maybe try to use 2 concerts with the 8gig send me a 10gig for now... or just wait to see if I need a 2nd 8gig.  And an upgrade of the bios will support the 16 gig?

  I thought I would update my own question with the truth and the response of work that hopefully someone other than stubmles help in this.  But in a nutshell the CTO of 2000 models DV6t you could order 2009 about DO DO support 16gig and NOT only 8 GB. I have 2 slots. I have the quad 720QM first edition, yes first edition. The Intel site and the sites of Auditor memory are FALSE!  The saying has been 1st gen Quad cpu supports no more than 2x4gig = 8gigs.  In fact, one of my tools suggests that I can put in up to 32gig assuming I can find sticks of memory 2 x 16gig I don't even think is still for sale not to mention affordability. Spread the word because I hope this helps others. I bought memory to geek and thought that I would be lucky since I read several comments and observations at various locations, which suggests that they were trying to 16gig and indeed he has worked for the 720QM processor.  I did have to update my BIOS HP offers that I have to install to 2010ish, as opposed to the 4 or so that are available today for my model, but I think that have been updated to support my model didn't require much more. I carried out memory tests too in 5 iterations without problem, and in fact it starts immediately without any problem with WIN 7 home premium, recognizing the sticks. I also checked the CPU64z tool for the memory tab.

• Max Memory 4GB or 8GB G62 - B10SD?

  Hello

  For my studies, I bought a laptop G62-B10SD about a month ago. In the new project, we started, we need to virtualize servers. Currently, my laptop works with 4 GB of memory. It is not enough to run several servers at the same time.

  I want to upgrade my laptop to 8 GB memory. HP said that my laptop can support a maximum of 4 GB. But some memory company sells 8 GB for my laptop. Is it possible to extend the max memory you accepted in my notebook?

  I really need the memory to work on my homework.

  Thanks in advance,

  Jeroen

  Your laptop supports up to 8 GB of memory system... Specifications memory would be DDR3 1066 MHz

• Pavilion DV5 2050CA: upgrade memory does not not about DV5 2050 this laptop computer

  The upgrade of 2 x 4 GB 2x2gb memory does not work. After installing the new memory modules, it starts and the HP Quickweb are visible. As a result, if I try to load Windows 7, he returned to the screen of Quickweb. If I install only these new memories (1x4Go config), I get the error Badpool header.

  The NOTE book details are:

  Model - DV2050CA

  Produnt number - WQ748UA #ABC,

  2.26 GHz, Intel i3 - 350 M processor

  Max - 8 GB of memory

  Details of the memory module are:

  Kingston ValueRAm-2 x 4 GB, PC-10600 1333 Mhz, DDR3, SDRAM, CL9 SoDIMM.

  Can some please help me make it work?

  Yes, computers laptops HP prefer the variety of low density of memory. This means that 8 black blocks of memory on the side of the chip, not 4.

  4 GB 599092-001

  Above is the part number of HP for a 4 GB module.

  

  http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1446634397&SR=8-1&keywords=599092-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Gel application - "the required samples are not yet acquired.

  Hello

  I have a vi that controls a test bench. The vi was created using Labview 8.6. Vi works fine and controls to the test correctly when running on the pc where it was created in the full version of software development (which is not converted into a stand-alone executable).

  The problem occurs when I create an executable file and try to run it in another pc. Initially the application seems to work ok but then after a random time (anything between 30 seconds and 12 hours), the application starts to turn slowly and then loses communication with the hardware (cDAQ-9178). After what happened when I opened MAX and try to run the task I get an error message that says that «some of the requested samples are not yet acquired...» »

  When the application starts to slow down, I see a reduction of the available physical memory and one of the CPU usage increases to 100%.

  I built the application using Labview 2012 and use MAX 5.3.1 on the pc hosting the executable file.

  Below, I have included a screenshot of the area of the block diagram which is probably more relevant to solve this problem. In MAX, the task is set to continuous samples, 1 k samples read at the rate of 1 k.

  Anyone have any suggestions for me to try please?

  Thank you

  So now, you can try what BCL@Servodan suggested. Create and launch tasks with DAQmx before your loop and see if it helps. Remove the timed loop would be also advised, and you set the sampling frequency before the normal while loop, as in the official example.

  This would not require too much effort and can help...