Maximally connected in a workgroup - Windows 7 Home Edition basic members

Similar Questions

• Can't activate Windows 7 Home Edition Basic, as it has been activated on a different processor and motherboard

  I have genuine windows 7 Home Basic cd but I can't activate it because I enabled it on another panel of processior with the mother, but now I have improved my processior and the motherboard. I used the automated phonesystem but cannot connect because he had said technical problem.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Reinstall Windows 7 Home Edition Basic, is not installation media

  Original title: can someone help me

  I have WINDOWS 7 HOME BASIC 64 - bit version of license with key in my laptop. I want to reinstall my windows but don't have CD or DVD.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• Error message "Windows cannot be installed on this computer" when trying to install Windows 7 Professional on laptop HP Envy 4 comes preloaded with Windows 7 Home Edition basic

  I bought a new hp envy 4 portable that this laptop is coming with the preload windows 7 Home Basic when I try to install windows 7 32-bit professional, but when it is copied all of the files at the end of the installation of finishing it showing error message that windows could not be installed on this computer hardware. Please suggest the best solution.

  Thank you
  Vishal

  Have you tried using Anytime Upgrade?

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• I tried to update Windows Vista Home Edition basic and now it says my version of windows is not genuine, even if I enabled it for years.

  I got my version of windows activated for about 3 years.  I did a bunch of windows updates yesterday when he arrived to service pack 2, it installed and most of it then told me that my version of windows is not genuine.  I'm also infallibly get error messeges that my installer of Modules of Windows has stopped working.   I went to the windows genuine activation tool, and he said he couldn't tell if my windows was genuine or not.  I have a sticker with the product key on the side of my computer.  I tried to call the Activation Center by following the instructions to get the phone number, but my windows vista won't take me to the screen with the support of activation phone numbers.

  Can I get the phone number for support?

  Thank you

  Lisa

  Hi, Uridicy,

  Try to post here:

  http://www.Microsoft.com/genuine/diag/

  Microsoft Product Activation Solution Center

  http://support.Microsoft.com/contactus/cu_sc_prodact_master?WS=OAS#TAB4

  How to find the phone number for Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929/

• I lose the connection Wireless for Windows XP Home Edition

  Hi, my first question here!  I have a laptop Toshiba Satellite with Windows XP Home Edition.  I have a Linksys wireless router.  Regularly, when the laptop hibernates or sleeps and turns the WiFi connection is lost.  Trying to 'fix' or 'connect' is usually unsuccessful.  Most of the time, after the reboot, it reconnects. Any suggestions?
  Thank you very much!
  Ken

  Assumed as replied, without other added messages

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP

• ____2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection? __othervise how?

  • I can't share internet and file simultaneously? If I share internet file sharing and disappear on the other PC if I share folder and run I can't share internet...
  • 2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection?
  • othervise how?

  Remote Desktop connection is not available in Vista Home: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  I need more info on how your network is configured to answer the question on the other.  How is the computer connected to the internet?  It connects wireless or cable to the router or modem or through ICS from another computer or what?  How do you change between the sharing of internet connection currently?  What happens when you try to enable both connections at the same time (or do not have two connections)?

  Thank you.  The answers above, I can be able to understand the problem, because right now I really don't know how you setup and I need as much information as you can provide about it.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After sysytem restored in windows 7 Home Edition, laptop can't connect to the internet.

  Personal salvation of support
  I have a lenovo laptop with windows 7 Home Edition on it, whenever I have a system restore I have following problem with network connection.

  • WiFi: the problem with the Wi - Fi connection is it says it has limited connection to the internet, the system receives a valid ip address of modem/router (DHCP). But system is unable to ping the address of the router (gateway address), similarly it cannot ping localhost or 127.0.0.1. It says general failure. Then I try to give the IP address manually on the wireless card, but I have the same problems
  • Wired: when I turn off the wireless connection and want to connect to the laptop via a network cable to the router I have the same problem, it cannot ping the localhost or 127.0.0.1.

  I tried the following, but it didn't work.

  • ipconfig enough and ipconfig/renew
  • Flushing the DNS system
  • netsh winsock reset all.
  • netsh int ip reset all.

  I saw several online forums, but couldn't find the solution to this problem, the only solution is to restore the system to factory setting, and then it works. Wired and wireless network works fine

  What is the solution to this problem, this is not an appropriate solution, is it a windows M S for this solution.

  Your help is highly appreciated

  Thank you

  Tahir

  Hello

  Open network and sharing Center, click on your wireless network connection.
  Click Properties, double-click Internet Version 4 Protocol.
  Select obtain an IP automatically, and select obtain dns server address automatically.
  check if it works
  method 2:
  This is perhaps a problem with your wifi driver.

  Open Control Panel, click hardware and sound. under devices and printers, click Device Manager. Expand network adapters and then double-click your network adapter. go to the driver tab and then click on set to update driver (leave the pc it automatically searches). Once he did try if everything has worked.
  see this page for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  I hope that helps!

• See 4.6 Client installed on Windows 7 Home edition does not connect to the Manager

  Dear friends,

  I just joined this communitity, need help with a small problem of debugging that arrested me in the track.

  I recenty view upgrade 4.5 to 4.6 view, upgrade some services don't prevent not problems, but I have overcome by reading the blogs on the internet. After the upgarde I can't connect to connection Manager from the view of my Client to view 4.6 - Vesrion - 4.6.0 366101. Only thing I can think that my view client 4.6 is installed on Windows 7 Home Edition. But I had no problem connecting to the connection manager when I saw 4.5 client installed on the same workstation.

  Any help will be much appreciated...

  In VMware View Administrator go to

  Display Configuration > servers > discovers the connection to the server > edit.

  Uncheck the box for «use a tunnel connection is secure on the desktop»

  then restart the view connection server service

• Reinstalled windows xp home edition in HP Compaq nx6110 No Internet!

  I reinstalled windows XP Home Edition in HP Compaq nx6110 and the drivers appear in yellow

  Ethernet

  Multimedia Audio

  Network controller

  Modem PCI

  Video controller

  Video controller (VGA compatible)

  I can't connect to the Internet, no sound.

  Please help me,

  Thank you very much!!

  You are the very welcome.

  You have to have XP SP3 installed for the wireless to work right, or you must have this patch for SP 2.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  The link I provided has all of the XP drivers you need.

  You must select the XP operating system from the menu drop down.

• On Satellite A200 (PSAE6E) FN key works only with Windows XP Home edition

  Hello

  I just get my Toshiba Satellite A200-2BH, (PSAE6E), included with windows Vista. I'm not comfortable with that OS so I formatted the hard drive and install win XP pro SP3 all seem to be fine with the driver downloaded from driver support Toshiba on the line, but the FN key do not work in certain combinations, for example:
  FN + F5 or + F6 or + F7 do not work
  someone say online in this forum that I should install updated BIOS, but this note on the Toshiba support website me resist:

  * "This Bios update adds functionality to your system *."
  * This Bios is NOT compatible for notebook computers equipped with Windows Vista! "*

  What should I do?
  My current setup is:
  Satellite A200 PSAE6E with WXP PRO SP3 with the FN key does not
  Should I install this update to fix this problem?

  Please help me with the path I should follow
  Thank you very much

  FN feature under Windows XP Home edition is supported with the latest version of the BIOS update. So don't be afraid. Download the right BIOS update and update Windows XP Home edition.
  Before start you BIOS updated to close all running applications and make sure that the laptop is connected to the power supply do not do this with battery power!

• I installed Windows XP Home Edition. Can not find the wireless network drive

  I installed Windows XP Home Edition on my spare PC.  Now I have wireless network card in the computer and problems to find the drivers for it, and I don't know what brand it is, so I know it's kind of makes it harder too.  Then I also have to start the computer, but if I press F1, the computer starts well

  I was just wondering how can I get rid of this?

  

  Disable all devices that can connect to your router (wired or wireless)...

  • PCs
  • Laptops
  • Tablets
  • Smartphones
  • Smart TV
  • Printers
  • Networked storage
  • Another thing that I have not mentioned above!

  Put on your router and wait for the normal light distribution. Then turn on all devices.

  I hope that your ip address conflict went away. Generally ip conflicts can happen when the router is running again without doing the same with all devices later.

  If you have even an ip address conflict, it is possible that you forgot something above or can someone use your router without your knowledge.

  Your router's wireless network is secure? Ideally with WPA2 encryption?

  Tricky

• Where can I find the full list of the features of Windows XP Home Edition and Windows XP Professional

  Could you please direct me to the Microsoft Documents where I can find detailed specifications and characteristics of the two operating systems:

  (1) Windows XP Home Edition

  (2) Windows XP Professional Edition

  Thank you

  Hello Roman

  Thanks for the clarification on the "new computer".

  If, as you say, the card mother and any other material is compatible XP then by all means install Windows XP on this machine. As you said you "my idea is to get the XP and keep as long as possible, even after support ceased in 2014, because I like it better than any other operating system." You have been made aware of possible problems concerning the lack of support and you are ready to accept those. The only problem is to get a copy of Windows XP from a reliable source. Unfortunately, I can't help you with that. Personally, I prefer to get my software direct from the manufacturer or by a reliable retailer. As no other retailer has copies of Windows XP you are, unfortunately, has left the search for credible resource on the web.

  My note to the subject of sticking with Windows 7 or 8 on your new computer has been in regards to your initial comment to a "new computer". I have two computers that are running Windows 7 and Windows 8, but then again maybe I need the additional machines and you do not have.

  I have to admit that Windows XP is a great operating system, and to be honest, I also use it on a virtual machine on one of my PC. However it is more for support reasons than the generalization on my part.

  Windows 7 get some getting used to, but I found it a usable operating system. Windows 8, however, is an altogether different beast. You love or hate it and judging by the comments on the Microsoft forums many people hate everything simply. Yet once I used it since the first beta of the operating system, so I'm used to it.

  I agree with voluntary J on Windows XP Mode. This is useful if you have applications that are not compatible with Windows 7. However, as you said in your reply to J to volunteer, you must upgrade to Windows 7 Professional. You can run Windows XP on a virtual machine, with, say, Microsoft Virtual PC 2007 (as a free option); However, you should always buy a copy of XP and new Virtual Machines have some restrictions, especially when it comes to certain types of hardware connected to your PC. Maybe your best bet, if you prefer to upgrade would be to use Windows XP from Windows 7 mode.

  I hope that you succeed in your quest for a reliable copy of Windows XP

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com