Measurement Studio has a least-squares method to solve the multiplication of matrices?

Similar Questions

• My cd/dvd drive has disappeared. All trying to solve the problems of the code 19 appears. How can I get the cd/dvd drive F?

  my cd/dvd drive has stopped working.  He said after a repair code 19.  How to restore the drive?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Toolbox of measurement Studio has now two points.

  The last time I checked the tool box was fine.  Now I have only two points inside.  I tried to reset the Toolbox to complete and devenv / setup and neither solved the problem.  When I select 'show all' I see the rest, but as they are disabled are greyed out.

  

  Michael Hey.

  Thiswould do you see?

  NickB

  National Instruments

• Comcast has a new IO program to solve the problems. It displays a 401 error code and will not install

  Comcast is offering a new PROGRAM to solve the problems of internet connection called.  My computer it does not open.  An said Comcast error code 401 error code.  Does anyone have an idea why it won't work?

  What internet connection problems that you think you are EasySolve of Comcast could correct?

  Related...

  http://www.broadbandreports.com/forum/r27178355-Comcast-EasySolve-

• My windows media player has become corrupted. How to solve the problem?

  Windows Vista 64-bit

  Hi Bill,

  1. do you get an error message when you use Windows Media Player?

  2. did you of recent changes on the computer?

  Also, follow the steps described in the article below:

  http://support.Microsoft.com/kb/925718

  I hope this helps!

• Measurement Studio 2015 Installer creator vs WIX

  What is the reasoning behind the development of the new measurement feature Studio Installer?  I have never had any problem using Wix for mixed deployment c#, C++ that use Measurement Studio products.  It just seems like an odd sense to send the development resources, opossed say, improve support WPF?  Or documentation of the product and samples for WPF?

  Mark DeArman

  Hi, Mark

  The reasons that we have dedicated development resources by creating a builder application to install for Measurement Studio are:
  1. Once Visual Studio has diminished in favour of their native installation project, the number of support requests involving the deployment of Measurement Studio has increased considerably.
  2. Apart from the Setup project, the only other method of deployment which Measurement Studio is fully supported is Windows Installer XML (WiX), which was not well received by customers. Almighty, WiX has a steep learning curve, even to accomplish a simple deployment.
  3 measurement Studio does not support InstallShield, among other popular solutions to WiX for the deployment.
  4. the supported deployment methods, no guide customers what drivers OR and components attached to their application to ensure good run time behavior.

  Builder installer helps to solve these problems and has already received positive feedback from many customers.

  Please let us know if you have any other questions about the Builder installer; We would be happy to help you!

  Thank you

• Measurement Studio 8.6 Setup error

  Hi, I get an "unknown error" in an attempt to upgrade of measurement Studio 8.5 to 8.6, which causes the installation fails.  I tried to uninstall all products of OR, but this has not helped (error persists).  I use Visual Studio 2008 and 2005 (2005 given that I needed controls ActiveX Studio measures in my projects and I was told it was the only way to do it: http://forums.ni.com/ni/board/message?board.id=232&message.id=7393#M7393).  Anyone have any ideas?

  So, I still is returned to the registry and removed any mention of National Instruments Measurement Studio or "nidaq.  This seems to have done the trick.  The MStudio and device drivers are install without "unknown error."

• Error of measurement Studio 2010 FxCop: location of Assembly reference OR

  Hello

  Please look at the snapshot attached for more details.  Basically, I have a project of Measurement Studio update, and I'm running FxCop on the compiled dll.  FxCop is looking for an older version of the NI.Common.dll that is referenced by OR. DAQmx.dll.

  Current versions of DLLs OR on the system:

  NationalInstruments.Common.dll - 9.0.35.362

  NationalInstruments.DAQmx.dll - 9.1.35.15

  Version of FxCop is looking for referenced by NationalInstruments.DAQmx - 8.9.35.302

  Any help would be appreciated!

  Thank you!

  -J

  Long story short, I advanced and uninstalled everything related to OR through the MsiBlast tool that I found on a different thread.  It turns out that some drivers were looking uninstall .msi files on a network drive that have since been moved to a different location.  Currently waiting for resettlement of Measurement Studio and I hope it will solve all my problems.  So I guess I'll consider cela a closed thread for now.  Thanks for all the help!

• Everything has been done to solve the problem with the FileVault have to be disabled in order to get the lights on the keyboard turns on at startup on the macbook pro?

  Everything has been done so far to solve the problem associated with the FileVault have to be disabled in order to get the keyboard lights turn on at startup on the macbook pro?

  I use FileVault. The keyboard on my MacBook Pro lights work perfectly. I'm under El Capitan 10.11.3.

• Chemometrics - Non-linear Iterative Partial Least Squares, MathScript and G-Native Code

  I worked with a client on a spectroscopy system and he asks me to do the analysis in components in the application I'm building for him. The current method, I found is what several people have built with MatLab scripts for least partial square. That's great and it works; However, I wanted to convert the native GCode script because I'm that guy.

  After a few days, I was finally able to get the results of the two screws is similar, but not the same thing. I was not able to find an explanation for it on the forums or elsewhere. The important thing I found is that LabVIEW breaks a little when you have a vector calculation as a ' * a, which should translate into a scalar value or a 1 x 1 matrix. When you use this value in another equation, such as the projection X'* a /(a'*a), LabVIEW works only on the first element of X'* a.

  Here, it's in the GCode with the work around to correct one ' * a result:

  

  It seems unusual that GCode treat a scalar result incorrectly. It was annoying, but I was able to go beyond that.

  My next question is there is some apparent rounded differences between GCode and MathScript that I was not able to explain. This difference amounts to about 1% in the data I have to analyze. I've included the project where I worked to compare the two methods. In the NIPALS_Conversion_LV.vi the left side of the block diagram has a loop structure For which is where the model is generated using the NIPALS and the right side is the application of the model. The NIPALS_Converison.vi contains the original code of MathScript where I worked with.

  Note that the difference between the two results is due to the calculation of you and matrices of B, which are related to each other because of the u. I probed the two vi extensively and everything is equal between them until the calculation of the elements in u. The equation in question is u = Y * ((Y'*t1) / |) (Y'* t1) |), even if it is expressed somewhat differently in the code.

  Any help on this would be greatly appreciated.

  Thank you

  Drew

  Drew,

  I took a quick glance to your project and for me, it seems that you have correctly translated the MathScript in its equivalent in the graphical representation.

  My first inclination on why you see this slight rounding error, is that the functions used in LabVIEW and MathScript can be different (from different DLLs). How these functions given floating point rounding may be different and spreading them error thanks to each iteration of the loop. I suspect that you notice that the error at this time in the program. If you compare every step of the script from the execution of LabVIEW and look out past 10 or if the bits of accuracy, I think you will see this error increase slightly after each step.

  If you can find a specific function during which a significant difference between the script and LabVIEW execution occurs, I'd be happy to review the functions and the differences between the LabVIEW MathScript implementations of functions.

  -Nick-

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• Measurement Studio 2015 under VS2012 c# IntelliSense does not

  I upgraqded my MS2013 MS2015 and now intellisense on MS all controls is no longer works. For all other controls language intellisense works normally. When I open an existing project using MS control (Gauage, plots, etc.) all the properties of control NOR and methods are of red color. When I press period after an instance control no properties or methods appear. Exisitng with methods and properties valid projects still compile without error.

  Hi Frank334,

  I tried to recreate what you see by creating a project using measures Studio 2013 for Visual Studio 2012 that mimics the code in your screenshot, installation of measurement Studio for Visual Studio 2012 2015 and again opening the project. Here's what I see:

  

  Everything seems to work. Can you walk us through the process you used to update to Measurement Studio 2015? Have you tried anything to refresh the IntelliSense information for your project? I found this article of stack overflow that can help: http://stackoverflow.com/questions/13375961/visual-studio-2012-intellisense-sometimes-disappearing-b...

• The difference between Measurement Studio and NiDAQmx?

  What is the main difference in Measurement Studio and NIDAQmx. I have a DAQ software, which was originally developed in Visual C++ 2003 M, who initially used Measurement Studio. Now, I want to replace involved studio by NIDAQmx latest version. It is Possible to do?

  Hello

  Measurement Studio is an extension for Visal Studio, which contains a variety of libraries for measurement applications as well as user interface such as graphics.

  DAQmx is the setting for hardware drivers for Multifunction DAQ devices of NOR. If you are using a DAQ card, you need this driver to access with any environment programming (LabVIEW, CVI, C, C++, .NET).

  This means that you can access the material, also with Visual Studio, which has no Measurement Studio installed. Although Measurement Studio is analyze and present the data acquired much easier.

  Kind regards

  Robert H

  OR Germany

• Measurement Studio

  Hello NO,.

  in the past Measurement Studio was included in the SDS CVI - has made this change or is-wrong this document ?

  Thank you!

  Hi, Wolfgang

  The SSP for LabWindows/CVI 2015 letter reads as follows:

  Note: Measurement Studio is no longer included in the complete edition of LabWindows/CVI. For more information, please contact customer service at the 1-866-519-6285.

  On the page you have linked, I don't see what a contradiction to this policy change so I think that the information is correct.

  I hope that helps!

• Methods available for the storage of custom measurements

  Just a general question.
  
  With the help of 11g. If I have a complex program of DML, which calculates the values using the existing measures stored in the cube and want to store the final result of the values calculated during the delivery of my program. What methods are available?
  
  My program must be run under the DBMS_CUBE package, part of a maintenance script? I appreciate any info on this.

  $LOOP_VAR is the name of a VARIABLE that is the basis of the loop. A simple example if your DML formula is

  SALES * 100
  

  $LOOP_VAR must be 'SALES', because ' SALES * 100 "has a value if and only if the SALE has a value.

  $LOOP_DENSE allows you to specify that one or more of the dimensions of the $LOOP_VAR should be closed densely even if they are not dense in the variable itself. This is useful for calculating the time of series which may have values even when the base variable does not. The simplest example is a DML formula which means "year to date SALES." (I won't give any real OLAP DML for this because there are many formulations and it would only mask the issue.) Now, let's assume that your variable base, SALES, has a value for Jan 1, 2012", but for any other day in 2012. If you simply set $LOOP_VAR to be 'DIRTY' and then 'year to date SALES' would be NULL for all other days in 2012. It is clearly false from a commercial point of view. The solution must also set '$LOOP_DENSE' to 'TIME', where TIME is the time dimension. The formula now return values for all the days in 2012. You can think of this in terms SQL as an outer join partitioned between the $LOOP_VAR 'table of facts' and the $LOOP_DENSE 'table dimension.

  SELECT ...
  FROM
    sales_fact
      PARTITION BY (...other dims..)
      RIGHT OUTER JOIN time_dim
      ON ...condition...