Measures for the Stop & start only one node.

Similar Questions

• I have Adobe Cloud and use CC2014, LR, bridge etc. One of my machines (one of two) was stolen. I have another machine and you want to enable these programs on the new machine. For the moment it only give me a 30 day trial.

  I have Adobe Cloud and use CC2014, LR, bridge etc. One of my machines (one of two) was stolen. I have another machine and you want to enable these programs on the new machine. For the moment it only give me a 30 day trial.

  Hi Peter,.

  have you tried my clue at the top?

  Your serial number or an Adobe ID ready, then contact us.

  See contact http://helpx.Adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing-a summary

  Or please click through http://helpx.adobe.com/contact.html and so "open" Please use the cat, I had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

  However, you can use ' phone numbers for customer service and technical support Adobe worldwide. "

  > https://www.adobe.com/eeurope/elicensing/licensemanagement/alm/contact.html (I used the link of Europe, but that makes no difference).

  Good luck!

  Hans-Günter

• How can I change the default zoom for the new tab only?

  The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?

  I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.

  https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

  I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.

  https://addons.Mozilla.org/firefox/addon/stylish/

• My computer takes much longer for the initial start as before?

  Original title: startup

  my computer takes much longer for the initial start as before?

  I suggest to do the following:

  (1) Windows Update and install all updates

  (2) run disk clean up and defragnment

  Check disk run 3)

  Check 4) Add/Remove programs and uninstall programs you want

  (5) run full system scan, with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also take a look at:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Dynadock: displays preferences are stored in the stop/restart only

  Hello fans of Toshiba and experts.

  I have a problem with * Dynadock DVI * and laptop computer from a different manufacture (with Vista Enterprise).

  I want to use this combination to eliminate the need for a typical desktop computer in office (without multimedia applications or 3D) environment, where * external monitor is defined as main display *, and * LCD internal as an extension of office *.
  This work of setting as planned, the main screen moves between external and internal monitor according to the (UN) Dynadock connection. However, this behavior lasts only until the stop/restart is performed. Then, the configuration is completely random. In some cases, it works as before, in other cases, the default mode is applied - internal LCD becomes the main screen and the image is mirrored on external monitor.

  The whole situation seems to depend on computer with the Dynadock is used. I found the laptop (also Vista) running solid rock with Dynadock.
  All used the drivers were in the latest versions - freshly downloaded, Vista Enterprise SP1 version of the Dynadock 2.3 software update.
  Is there a way to force Dynadock software to use the built-in views configuration whenever the docking station is plugged?

  Thank you...
  Petr Kopecek

  It could be a display driver problem, have you updated display driver and the BIOS of the laptop?

• taskbar, not seen on the button start only are seen

  on vista, the task bar is not seen. We see only the Start button. Auto-hide, it is locked. and receive point cursor with double arrow head anywhere on the desktop. Please help me.

  ,

  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  Create a new user account and verify. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  Now search for the question.
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Method 2:

  If the problem persists, you can collect a color screenshot 256 and transfer it to the http://skydrive.live.com/ using your Live ID and I'll check it:
  Screenshot
  ========
  1. press the button print screen (print screen) on your keyboard.
  2. click on the "Start" menu, type "mspaint" in the search bar and press ENTER.
  3. in the Paint program, click on the "Edit" menu, click on 'Paste', click on the 'File' menu and click 'save '.
  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".
  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box 'Save as type', click Desktop in the left pane, and then click"Save ".
  
  ===========================================================
  See the discussion that follows for more information on how to display a capture in screen answers forum:

  How can I post screenshots of my question in the Forum of answers?
  http://social.answers.Microsoft.com/forums/en-us/vistaassistant/thread/ca5463aa-ec2f-4497-8cc4-cfe7fd5861e6

• Search for items that are in one node to a date given (responses/dashboard)

  Hi and thanks for reading,
  
  I have the following problem:
  An element is in arriving at a node and starting from this node a little later. In my table, I have the finish and the start datetime. Now, I would like to create a guest/filter on the dashboard, so that I give in a datetime and the dashboard shows me all the elements that are there to this date. For the moment I have two guests for arrival is less than the given date and departure is larger than the given date. But I would like to have a single table that filters for all the elements that are there to this date.
  
  Any suggestions are appreciated
  
  Evgeny

  You also have another solution.

  You can use a command prompt and set a variable presentation date then in your report filter:

  arrival is smaller than the presentation variable and departure is bigger than the presentation variable
  

  Check here how to set a variable of presentation:
  http://gerardnico.com/wiki/dat/OBIEE/obiee_setting_variable

  Click here for the file server:
  http://gerardnico.com/wiki/dat/OBIEE/presentation_service/obiee_presentation_variable_area#filter

  And here for the format of the default mask:
  http://gerardnico.com/wiki/dat/OBIEE/logical_sql/obiee_date_variable

  See you soon
  Nico

• burn video fails to recognize the drive. audio only one third registered

  I use windows media player. for video recording - imation dvd + R 16 x 4.7 GB.. FOR AUDIO - IMATION CD - R 1 x-52 x. 700 mb. I have Ares. I'm going to file transfer. then try tro do drag the file identified in all, clicking on combustion, it tells me to insert a writable disc. I have windows media player, is also useful. Never had the problem before you download the media player. my e drive respond inconsistently.

  What version of Windows are you using?

  To clarify, you say that dvd discs are not recognized and that the cd disks are recognized but will not let you complete combustion?

  The drive reads discs retail normally?

  Assuming that I understand your problem, I tend to point to the drive itself. If there is problems reading discs of detail, a bad drive is the most likely case.

  You can try to perform a system restore before the problem started:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• design for the touch screen only

  Is it possible to design and apply a suitable for touch-screen devices bb 10? I don't want to create my application for non - touch screen devices is possible or would he rejected for the restoration doesn't not for resolution of 720 x 720?

  You can certainly, if you're just a question in general.

  If you also want to get the certification built for BlackBerry, however, you at some point will have to update the application to add support for screen 720 x 720 and possibly other unique features for phones with keyboard. (At least, if the application is not one that would be useless on the small screen for a reason any.)

  Details on when that might be is not yet known. I think that the terms and Conditions of the BFB program talk about how long you will need to submit the update, etc, if that's what you're talking about.

• CAN'T PIN THE UPDADES OF WINDOWS FOR THE MENU START OR THE TASKBAR

  How do I can pin button updates of windows for the startmenu or the taskbar... Thank you

  Hello andre1264,

  Thank you for visiting the Microsoft answers community.

  PIN Windows Update in the start menu:

  -Click on Start Orb > click on all programs > click and hold Windows Update > drag the start Orb and gout

  It's going to pin Windows Update in your Start menu.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• new SSD HP Pavilion HPE win 7 home Premium Error: Driver_Power_State_Failure Bluescreen from 30 to 45 minutes waiting for the stop down.

  Hello all, there

  I recently installed a new SSD in a HP Pavilion HPE with windows 7 Home premium. After this event I get bluescreen Driver_Power_State_Failure after about 30-45 minutes waiting for the computer to stop. I have a minidump file if this will be useful and I would be very grateful if someone could help me solve this problem :D

  Minidump: http://www.mediafire.com/?hy7so6n9af5f73v

  I hope this helps and all support is most appreciated!

  The tihub3.sys seems to be in question:

  BUCKET_ID: X64_0x9F_3_POWER_DOWN_IMAGE_tihub3.sys

  The tihub3.sys, which is dated January 14, 2011, is a Texas Instruments USB 3.0 driver so try to update this driver by installing the next update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-108667-1&CC=UK&DLC=en&LC=en&os=4063&Product=5144370&sw_lang=

• How do I swap a symbol for the layer not only for a Tween?

  So I want to replace an arm of a guy with another arm. The layer is made up of many interpolations. I have replace one symbol (arm) with another (the other arm) interpolation by interpolation. I wonder if there is a way to replace a symbol for the layer at the same time.

  I'm new to Flash so my question may strike some as absurd. Please, let me know if this is the case.

  The buttons at the bottom of the timeline is a (tip aide said "Change markers") button and another button, 'change multiple images '. Turn on edit multiple images, then in menu markers to change choose marker range all. Now, click in the layer that you want to change, and change in the menu, choose symbol symbol/Swap... You can now purchase the other symbol in the library, and all the symbols in this layer will be swapped. Disable Edit several images when you are finished.

• How width measured for the forms and the stroke is converted?

  How is the width and the height calculated in the Panel processing for an object? Should I use an average? An example can be seen in the first picture. The lines are not a uniform width.

  In addition, how are traits converted from pts to pxls? For example, if I make one related 2.3 pt, when I expand the subject of the width of the transformation Panel will say 2.3px; However, I thought that the point conversion pixel (even for a screen resolution of 72 dpi) was different. An example can be seen in the last two images, where a line was made with a width of line specified and then expanded.

  

  

  Ah, dasikins.

  For an extended object as described and illustrated, I think that you can get a medium width.

  Approximate simple, which is near when you have a relatively long object, divide the area (A) of the length (L) the path trajectory and multiply by two (2 * A/L).

  For most of the versions (up to CS4 and CS6), you can use the free Patharea filter (which provides you with an area and length available here)

  http://www.Telegraphics.com.au/SW/browse/filters

  and I think that the latest versions have the information in a range of information.

• Problem with headphone selection if the table has only one row

  Hi all
  
  I have developed a table in which I use selection listener to perform a task when a line is selected.
  It works fine when I have more than 1 row in the table, but when I did that one line in the table, the listener of selection do not call the corresponding method in the bean.
  I understand this selection event is raised only when the line is changed, but in the case of use when only one line is there, what do I do to make the listener of selection work?
  
  The selection listener I wrote the code to make the line selected as current line and perform the required task.
  
  Please suggest a way out of this situation.
  
  Thanks in advance.

  Hello

  try to remove this table attr

  selectedRowKeys="#{bindings.xxx_VO1.collectionModel.selectedRow}"
  

• Appropriate measures for the first review of Apple without stress

  This forum is really a great source, thanks!

  We have 2 loan editorial magazine (garden design). Tomorrow, my colleague will subscribe the professional account.

  We want a multiple issue with subscription (retail). I have a question about the correct order of the steps to do:

  (a) account settings (DPS App Builder account the application administrator account).

  (b) publication of the free folio as free (we just ios developer)

  (c) publish the folio of detail (I know that the in-app purchases are not easy)

  (d) build a viewer (multi-probleme with subscription) and send it to Apple for review

  I read that Apple does not approve the Viewer without content and for that, we expect and we have now 2 small magazine ready.

  The questions are: how Apple can check my two magazine if I send for review only the Viewer? (I am a new customer of Apple and do not know my content). And: can I publish only the free folio or it is better to publish also the retail trade?

  Mary

  Looks like you want to create an application that allows users to buy two individual sheets or subscribe to folios. To do this, you must use iTunes Connect to create two kinds of in-app purchases. (1) create an in-app purchase for each folio of detail you want to sell.  (2) create in-app purchases for each subscription term you want to offer.

  You specify only the in-app purchases for the individual sheets whenever you publish a folio. When you publish a folio, you specify Public and retail, and you specify the same exact product ID you specify in iTunes Connect when you create in-app purchase. We recommend that you use the com.mycompany.myappname.issue name format. Once again, you'll need a different product for each different folio ID. In other words, your problems from January and February require different product ID, and the different in-app purchases. If you create a "renditions" folio (such as folios of 1024 x 768 and 2048 x 1536), use the same name of sheet, product ID, and Date of Publication for the renderings.

  As I said, you also create product ID in iTunes Connect for the duration of your subscription. We recommend that you use the com.mycompany.myappname.duration format. You specify these DPS App Builder product ID.

  To turn on the newsstand, follow the instructions in the accompanying guide. To do a few things to make it work.

  I don't think you want to test a custom Viewer if it is not happy. Published a folio of detail for the tests. Folios of detail appear in the viewer of development that you create even though Apple has not approved the in-app purchase. They do not appear in the public version of the application unless the IPA is approved.