Media card internal drive not seen by Windows 7 Pro 64

Similar Questions

• A satellite - DVD Drive not seen by Windows Explorer

  The DVD on D deive is not seen by windows Explorer. Used to work, it has now disappeared. The dvd hardwars starts at the start, then stop.

  Any ideas anyone?

  Hello

  You see the DVD drive in Device Manager and you then yellow exclamation points?
  Maybe you should just remove the drive from Device Manager and reboot the laptop. Select the drive in the Device Manager, right-click on it and choose uninstall. Then, restart the laptop.

  If it doesn't work try the workaround posted by Akuma to remove upper and lower filters.

  Good bye

• Secondary internal hard drive not seen by Windows

  added a secondary hard drive visible in bios, but not in the windows of the computer parameters. Win8 running.

  Moved from feedback

  Original title: secondary internal hard drive

  Hello

  Is this a new drive?... If so, she must probably INITIALIZED and formatted...

  You can do this by right-clicking on your DESKTOP and select MANAGE...

  On the screen that opens, you will see on the left DISK MANAGEMENT.

• DVD drive not seen by Windows 8

  I have a Dell Inspiron with Windows 7 537 originally. The installed and functional DVD drive is a TSST DVD +-RW TS-H653G ATA drive.

  I have recently installed WIndows 8 in dual boot. When I boot with Windows 8, the DVD drive is not seen. When I go to the Device Manager and I look at the properties of the DVD player, I have the following message appears in the device status area (here I give a translation of the message in french)

  This device is not actually connected to the computer (Code = 45).

  To correct this problem, reconnect the device to the computer.

  The fact is that the DVD still works fine when starting with Windows 7.

  Do I need a new driver or a new device or what else?

  Marcel Painchaud

  (mpainchaud67)

  
  

  Hi Marcel Painchaud,.

  I appreciate the time and effort you took to resolve the problem. Please do the following:

  1. run the command as administrator prompt. Type cmd in Windows 8 modern user interface and press HUMINT + shift + enter

  2 type following and say enter

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  3. reboot the system

  Once the system is restarted check if the DVD player works fine.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• Internal SATA II hard drive not recognized by Windows 7

  I upgraded to the i7 platform today and started with a new installation of windows 7, but I also kept my old 2 disks hard disk 0 (Hitatchi 250 GB) drive (Hitatchi 500 GB) 1 2 (Seagate 1 TB drive) - the 1 TB HARD drive is a new one. However, the BIOS recognizes all drives, Windows 7 does not recognize 1 TB HARD drive... Disk management is. Any Suggestions? I want to be able to use the walk that I have information on the 500, but it is 90% full... (Pulling my hair out trying to find a way for this drive be seen by windows 7).

  Intel LGA 1156 MB
  4 GB RAM DDR3 1066
  Intel Core i7 2.8 GHz
  MSI NVIDIA 250 GTS 512 MB video.

  I managed to solve the problem. I had EXACTLY the same problem and was able to resolve this down to a bug in Windows 7.

  Windows 7 SATA not recognized

  I did a blog post on this subject in which I linked above. However, I will also give you the solution here:

  The answer:
  Start-> right click computer-> properties
  Device Manager (left side)
  Click on the arrow of disks to view the list
  Find your reader you have installed here
  Make a right click on the drive-> uninstall
  After the HDD SATA disappears, click on action-> Scan for hardware changes menu

• U2413 SD card reader does not work with Windows 8.1

  My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?

  I have the same problem here too.

  The driver above does not work.

  

• Internal drive not found, trying to reinsert the hard drive Alienware R4

  I had a few problems leading to myself for buying a new drive hard drive for this reason "internal drive not found, try to reinstall the hard disk.

  I did a test of Epse and found that the hard drive had problems.

  so I went out and bought a new, replaced the old and the new and always with the same error "internal drive not found, trying to reinsert the hard drive."

  I ran the test Epse, there is no problem with anything, it was a successful test. So why am I still unable to cross the screen?...

  Anyone have by chance any suggestions as to why it is continue to happen? Can I get a helping hand please? :/

  OK, I think I'm making progress.

  I changed my starting uefi to legacy, now I'm on the screen of windows install! Woohoo

  one problem, I don't have a windows installation cd or anything, I have to buy windows 7?

  or is there something I can do to restore my original?...

• Home Media Network Hard Drive, Cloud Edition on windows 8

  Hello, I would like to know how to use disk hard mid with a computer running windows 8, instalation CD software doesn t work

  Hello, configure your Media Network Hard Drive Cloud home edition Windows 8 (.1) is quite easy.

  You can consider installing the update 8.1 for Windows first...

  But nonetheless go to the Lenovo Web site and download the latest version of the LenovoEMC Storage Manager.

  1.4.4.14439 worm.

  It works somewhat like the Iomega software former.

  (Assuming that your device has the latest firmware installed and everything is set up properly it should work fine.)

• KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  Today (Tuesday 22 may 2012), after seeing the yellow icon in the taskbar, I ran Windows Update and KB2633880 - KB2518864 - KB2572073 successfully installed, I turned off the PC by clicking on the red icon Turn Off with a shield icon, expected for all 3 updates to install, 4-color and for the PC to stop itself. It took a while, but everything went well. No error message.

  After turning on the PC, I went back to Windows Update and was surprised to see Windows Update suggests to install... KB2633880 - KB2518864 - KB2572073 which is the same three components I have installed successfully.

  I ran Microsoft Fix It that 1 issue (update of Windows components needs to be repaired (next line) repair of components Windows Update.) I clicked Next. Everything went well. I had a green check mark 'Fixed '.  I turned off the PC (without having to install 3 updates which I have already installed).

  I turned on the PC and went to Windows Update, asking me to install KB2633880 - KB2518864 - KB2572073. It's like Windows Update does not "see" that these 3 elements have already been installed.

  Note: I have the same problem on another PC. The two PC XP SP3 and are stand-alone PC. One is a desktop computer. The other laptop.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Vodaphone VMB Lite will not install on Windows 8 Pro clean install

  Vodafone Dongle (Huawei K3770) advertising software. NetFramework 3.5 (versions 2 & 3 inc) must be installed via the internet - download 3.5 full version via Windows 7 will not install on Windows 8 Pro - tick Windows 8 Pro add features to install also calls to access the Internet - this own is almost useless without internet access and must be considered incompatible with Vodaphone Dongles and combination of dual-boot.

  The upgrade on Windows 7 H & P (providing 7 is fully updated) works ok but degrades to the operating speed of the Hp Pavilion dv7 3111ea

  Hi, I have activated. NETFramework 3.5 as explained above. The driver of the Vodafone Dongle loaded but when I connect, the PC gives the following error message and reboot: bad_pool_caller

  What can I do?

• I bought a laptop computer with non-genuine windows 7 I have the windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd.

  I bought a laptop computer with non-genuine windows 7. I have the original windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd.  Help me, please!

  You will need to either buy a version authentic retail Windows XP, with its key sales, to a true scource or visit the site of laptop manufacturers, support for your model and see what versions of win are taken care of, then buy a commercial version of this o/s.

  The key on the base of the laptop is the recovery key that requires that the recovery disks provided by the manufacturer.

  You could phone manufacturers to support to see if they have the origonal recovery cd send you, for which it maybe a small fee.

• Hitachi external hard drive not detected on Windows 7. Disk Management displays "No Media"

  OP: New computer with Windows 7 cannot display files on external hard drive Hitachi

  My Hitachi hard drive is compatible with Windows 7.  This hard drive was working properly with my old computer using Windows XP.  I can see the device in the Device Manager, but I can't view the files.  In disk management, the drive is listed at the bottom of the screen, but said "No Media", however there is almost 50 GB of data stored.

  The hard drive shows in the list of devices and printers when I opened that folder, but does not appear in the list of hard drives on my computer.

  I still don't understand what happened, but I've decided how to fix it.

  After trying my hard drive locked on 4 computers with Windows installed (two with Windows 7) and two with XP and having no success, I decided to plug it into a computer using a Linyx OS (Obuntu).  The computer recognizes my hard drive and open.  Then I was able to use the Windows System.  I managed to freeze hard drive again and he cured the same way.  Maybe this will help also, if you have access to a computer with this operating system.  Maybe a mac would also work.

• Periodically not seen by windows CD/DVD drive

  When you use iTunes, I started to notice that the program was telling me the burner or software disk was not found and iTunes would freeze. Then I checked to see if the disc has been recognized on the computer devices... it wasn't. I tried several updates and removal of the CD driver and restart... without change the computer does not see my CD/DVD drive. Any help would be greatly appreciated.

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Read the part about iTunes:

  If you cannot play or access a CD or a DVD, you may have to reinstall programs. Some programs are may not be able to use your CD or DVD drive until you reinstall these programs. If the problem persists when you install or uninstall these programs, contact the manufacturer of the program to see if an update is available that solves the problem. Some examples of programs that might be affected are:

  • Apple's iTunes software
  • Software Nero Nero Inc.
  • Roxio Creator of Sonic Solutions software
  • Microsoft Zune software

  See you soon.

  Mick Murphy - Microsoft partner

• Tecra M2 - card reader does not work on Windows 7

  Hi all

  I installed Win 7 on my TECRA M2 and everything worked well at the same time... except for one thing! The SD card reader is not recognized (works well with XP).
  Hint please?

  Thanks in advance

  JP

  Hello!

  The card reader is listed in the device with the yellow exclamation point Manager?

  Normally, I suggest that you should try the Windows Vista driver card reader, but there is no driver on Vista card reader available on the Toshiba site.

  So it seems that you have to live with this problem or you try a driver from another laptop computer card reader

  Good bye

• SD card slot does not work on Windows Vista

  I just installed Windows Vista RC1, which has just been published

  Just about everything works except the secure digital memory card slot.

  Until I installed Vista I ran the Compatibility Wizard and he said a few things that may not work, but the one that stood out was "SD Memory Card Format Utility.

  I guess that's why the memory card slot is not working?

  Anyone know how to operate? This isn't the end of the world because I can use the docking station, but his practice which he just work directly at the exit.

  Any help would be great.

  Thank you

  Maybe the new operating system Vista doesn t include the compatible driver for the SD card controller.
  Right now the Vista is not supported by Toshiba because this OS is not official on the market.