Meetings of synchronization and error in the sychronsing. Unknown error.

Similar Questions

• LABVIEW USART synchronization and one of the stm32

  Hi all!

  I try to control stm32 usart using labview to send the USART for example the baud rate settings. so to make things clear, I will give an example:

  at the beginning of the stm32 and labview two baudrate 9600, the user chose 115200 (on the labview interface) to communicate with the baudrate for the next operation. the problem is that I can't change baud rate to 115200 visa because stm32 still set to 9600.

  so I had an idea:

  -J' I send information 115200 without changing baud rate of visa (yet to 9600)

  -stm32 receive 115200 information but do not change the configuration of the usart (always 9600) because labview that he will solve his USART

  -stm32 send (with 9600 baud) to labview that he will solve his USART

  -labview already becomes his baudrate 115200 (then stm32 changed his USART at 115 200 baud)

  ==> now both of them are set up to 115200 baud

  my problems are:

  -is the right solution?

  -If yes how labview change baud rate and making him choose between the former baudrate (9600) and the new one (115200)?

  I'll be greatfull if someone helpe me and make me some tips?

  Best regards

  What you're basically describing is a method of exchanging simple confirmation. LabVIEW tells the micro to change its transmission speed. The microphone responds by saying "OK, I'll change." Your LabVIEW application assumes while the microphone has changed its flow baud rate, so he goes ahead and alters its baud rate to match. Without doubt, you have a simple "are you is order" who can be sent to the microphone to check the baud rate change. If this isn't the case, it is probably worth investigating.

  As to your question concerning the change of rate of baud in LabVIEW, a simple solution is to close the existing session of VISA and call the VISA VI set up the Serial Port with the new baud rate.

• How do update you the "cloud-copy" of bookmarks in sync-ed, etc. (assuming that 'sync' only allows you to synchronize your device with the cloud

  The machine used for the first set up a sync account seems to provide the cloud 'Captain' at the time of installation. Subsequent operations 'sync now' any device seem to download this cloud 'master' on the devices. But how to update the 'master' cloud and it can be done (transferred to) by the device of your choice?

  Hi Igbortaz,
  This ONLY happens when you join the account the first device. After that, all devices connected to the account synchronization and merge with the stored then replaces the local profile. Unfortunately, at the moment it doesn't have a function to choose the device that is the master.

  And before any changes, I recommend you make a backup of your profile.

• Stop synchronization of windows with the file is no longer available

  How to prevent synchronization of windows trying to sync with a folder that no longer exists? I'm working on a windows XP computer that had a network folder shared on our old domain controller. It was created to "work offline". This former DC has since died, but the XP machine is still trying to synchronize with him whenever he disconnects or connects.

  I tried to delete all the files temporary/offline, I tried windows Explorer and go to tools > Synchronize and then unchecking the file that does not exist. I tried to go to the configuration of the synchronization and UN-checking the folder to synchronize when connected to the LAN. Nothing seems to prevent synchronization attempt. There are also other folders that exist that I want to keep the synchronization with, so I don't want to completely disable synchronization. Does anyone know how to make so that he can stop sync with just this file?

  Hello

  You can try the troubleshooting steps provided in the link below in case you haven't tried them already.

  How to use offline files in Windows XP
  http://support.Microsoft.com/kb/307853

  For more assistance, you can publish the isuse on the link below.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Error in deployment of Simulator for the 10 Blacbkerry 'synchronization and application launch.

  I use Momentics® IDE for BlackBerry Version: 2.0 Build id: v201310251603 with Simulator10.1.0.4828.

  Momentics seems to connect and paired with success to the Simulator. When I click "Run", it starts the process of packaging and deployment, but get the error in "synchronization and launch the application" part. There are different errors but no useful information in the dialog box. Here are two samples

  Failure of deployment: Info: failed to get a connection QConn, sync disabled
  Info: Sync disabled, packaging full bar required for installation
  Info: Sending request: INSTALL_AND_LAUNCH
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 304312
  Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
  Info: Treatment 304312 bytes

  #2

  Failure of deployment: Info: try using the synchronization failed: connection reset
  Info: Sync disabled, packaging full bar required for installation
  Info: Sending request: INSTALL_AND_LAUNCH
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 304312
  Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
  Info: Treatment 304312 bytes

   

  Please refer to this article for more information about this problem and a workaround.  Note that this problem is resolved in the new versions of BlackBerry 10.

  Application deployment can hang or fail after OTA update to 10.1

• Time synchronization error ESX and VMs despite the existence of the NTP server

  Last time the ESX Server system was wrong, and some virtual machines (windows and linux) took the time ESX as their time.

  The weird part is that these virtual machines have been synchronized with a physical server, and the time synchronization tool VMware has been disabled!

  No idea why this happens?

  Thanks in advance

  ... and the option synchronize tools vmware ESX server has been disabled

  I understand that. However, the KB article, there is a difference between 'disabled' and 'completely disabled.

  André

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• synchronize the inputs and outputs on the USB-4431

  Hello

  I have an application that needs to send a signal on the USB-4431 and then capture it with an entry on the same device.

  Aware that I use two tasks to do this, one for input and one for output. I discovered that a trigger (on the RTSI bus) can cycles of sending/capture sychronisé departure operations so that it can be a constant offset between the captured signal and the output signal.

  Unfortunately, the code I found is for Matlab. I can't find an equivalent for it in the C API of NIdaq. The method is described here; http://www.mathworks.in/help/daq/synchronize-analog-input-and-output-using-rtsi.html.

  What I can't understand is how to implement this on the analog input:

  ai.ExternalTriggerDriveLine = 'RTSI0';
  

  Can someone shed light on how to do it?

  The rest of the things described here, seems to be feasible with a normal trigger:

  ao.TriggerType = 'HwDigital';
  ao.HwDigitalTriggerSource = 'RTSI0';
  ao.TriggerCondition = 'PositiveEdge';
  

  Thank you

  Nirvtek

  You can synchronize the HAVE and AO by sharing the start of relaxation between your two tasks.

  Choose one of your tasks as the "master" and the other to be the "slave" (any).

  Set up a trigger to start of digital dashboard on the task of the slave, and set the source of the trigger to be the trigger of the master's departure.

  Assume the following:

  The name of your device is 'Dev1 '.

  I is the main task

  AO is the task of the slave

  Here's what you would do to sync the two:

  (1) create the tasks I and AO in order that you want to

  (2) set up "timing" on the tasks of HAVE it and AO (you choose the sampling rates must be the same or power-of-2 many of the other (for example 100 K, 50 K, 25 K, 12.5 K, etc...))

  (3) configure your slave (the task of AO) task to have a numerical advantage start trigger and make the source is the trigger for the start of the task of the master (the task to HAVE it). In our case, "Dev1, AI, StartTrigger.

  (4) write data (a sine wave, presumably) to your task AO

  (5) start the task from the slave (the task of AO).  The task of the AO is now in the 'Started' State, but given that you've set up a digital trigger early, it won't actually generate data until he sees a numerical advantage of 'Dev1, AI, StartTrigger.

  (6) to start the main task (task to HAVE it).  The task of the AI does not have a trigger digital early, so the software will immediately generate a start trigger, which also causes a numerical advantage on "StartTrigger/AI/Dev1", which causes the task AO start at the same time.

  7) read your job to HAVE.

  You will notice a few 0 at the beginning of your data to HAVE. It's a result of something called "Filter Delay" and it is an inherent characteristic of all DSA devices - see the manual to use DSA and this article for more information on what is and how to cope.

  I hope this helps.

  EDIT: I just noticed that you pointed out an existing C example. It's exactly what you want. I don't know why you have a resource error booked - I tried it myself and (after changing the AO will of +/-10V to +/-3 .5V), it works beautifully.  Try to reset your device to the MAX (or DAQmxResetDevice() of your program)

• error code 80072F8F - synchronization of clocks on the internet

  original title: get error code 80072F8F. I ran the repair and maintenance of the diagnostic system. He cannot find any fault with my score clocks. When I run synchronize clocks of internet it says there is an error and can not synchronize.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Windows update does not work

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• "Some impossible to synchronize files" error - 72 files fails repeatedly to synchronize with the server

  I see several files synchronize errors - 72 files currently. I checked the KB and looked at the usual causes - it is no strange characters in the filename, excessively long paths, nor files in use by other applications.

  Pause and restart synchronization of file does not resolve the problem. Or a full restart of the machine.

  Please notify.

  [EDIT] - I forgot to mention that this occurs on a computer that is running Windows 8.1.

  Thank you...

  Karen

  Hello

  There are not a lot of information in your very short log file. I received your email. Please follow the steps exactly (without restarting your PC)

  1. close Creative low cloud full, make sure there is no Adobe process running in Task Manager.

  2. go in C:\Users\\AppData\Roaming\Adobe\CoreSync

  3. delete all files ending with .db or the .db-shm or the .db-wal

  4 re start creative cloud

  Thank you

  Warner

• I broke my screen, and now cannot drag to open it.  I have an alarm that don't go.  I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  I broke my screen, and now cannot drag to open it.  I have an alarm that don't go. I can let the battery die I know but I really want to be able to access and examine what are the texts I received today. I think that my ICloud is can be disabled. I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  Without entering your access code, it is not possible, unless your time is in iCloud. If this is the case, connect to iCloud.com to check your calendar.

  Good luck.

• synchronization: How can I store the mails for different accounts remotely and manually copy the most important e-mails in local folders on both devices?

  Hello. I have two machines and two accounts, so what I want is this:
  I want only to store mail from two accounts in a remote place and copy more important mails to local folders.

           (I will be grateful for any ideas as to where/how this "cloud" can be - specially free places)
           * Can I have a copy of these local folders in both devices and the remote storage?
           * Could i synchronize devices so that: when i move a mail to a local folder in any device, its copied to the same folders in
              the other device and the remote storage place?
           * The remote storage place will have many other folders. When I open Thunderbird, I also want to see these and the mail
              inside, and also be able to move mail from the inbox to these folders.
            * One of the accounts is gmail. In Account Setting tool, there is an option for synchronization. If there is no easier way, I can have mail for other account copied to gmail, and just syncronize gmail mail. For this, how will I copy my present folder structure to gmail. And how can I syncronize the local folders on the two devices?
  

  Thanks in advance.

  The first awkwardness that I see is that there is no clear format in which to store the messages remotely such that you can work with them in an email client. It may be possible to set the option "Local Directory" of the account in Thunderbird to point to a remote folder (DropBox comes to mind) but I've never tried, and I'd be nervous about what happens if the connection cannot be established, or if you happened to access it simultaneously from two different locations. The other concern is that mail stores are fast becoming big, and you would be forever download and download large files (several gigabytes). Thunderbird stores what looks like a folder that contains many messages separated as one big file, so there is no simple possibility of incremental changes to load up/down.

  The idea of local folders in Thunderbird is to detach messages from servers, therefore they do not follow what is happening on the servers. I say this to emphasize the distinction between files stored locally and permanently ("Local Folders"), against copies cached files online ("synchronized"). It is not sure to consider your folders synchronized as permanent.

  So folders synchronized on an IMAP server are "mirrored" in Thunderbird you do not have a local (although temporary and transitional) copy of messages. This is done primarily to avoid download repeatedly the messages if you re-read, and it makes the fastest search more effective. But these "synchronized" track of message that are deployed on the server, and so if they are deleted from anywhere, all devices that are synchronized at one point also see messages deleted endangered. (Except if you have saved a local copy on the local folders account).

  I use a gmail account quite as much as you described; Copy or move messages to this account, so that they are visible in my phone, my tablet, my own laptop and my computer works. It's free, and it is "in the cloud"; the only reservation I have is her private life. There are other suppliers (e.g. 1 & 1/gmx) who do not seem to have the fetish of collecting data that google thrives.

  It's pretty simple to create filters in Thunderbird to automatically copy messages to your account "cloud." even better is to implement the translation of rules on the servers of other accounts, to ensure that your messages are automatically sent and waiting for you when you log in next time, already in the cloud account.

• The pages won't load right not and error OSCP

  I'm having two issues probably related. The first is that Firefox is oddly loading some pages: e.g. addons.mozilla.org while in other browsers that they load fine. The second is that some pages not be loading not at all like the https://addons.cdn.mozilla.net/storage/public-staging/3682/add_to_search_bar-2.2-fx.xpi which gives me this strange error
  "Secure connection failed".
  An error occurred during a connection to addons.cdn.mozilla.net. The OCSP response is not yet valid (contains a date in the future). (Error code: sec_error_ocsp_future_response)

   The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.". 
  

  Yet once again, I don't have this problem with other browsers - unless you count waterfox who has these same problems that probably should since it is built off the coast of firefox. I tried to uninstall and reinstall and clear the cache and cookies, none of this has had no effect. These two problems started at the same time. Seems to me to get the problem loading error on all XPI links, or at the very least, I saw, for instance, I had to grasp the info manually troubleshooting because when I clicked on the link to automatically add it got the same error (https://addons.mozilla.org/firefox/downloads/latest/426841/addon-426841-latest.xpi) but it is not only get links that contains .xml files for example I first noticed the problem a similar site to the newsletter, I wish I could understand the name or even had my story, so I could find it. I don't know if the problem is limited to https or not because at the point where I had the addon https only and don't have it test the reinstallation. I looked in the settings of validation and the first 'use the OSCP to confirm the validity of the certificates' but the second one "when oscp server fails to treat the certificate as invalid has been unchecked. I unchecked the first box and I still don't have the same error that really baffles me.

  The application databases

  Name: Firefox
  Version: 28.0
  User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; RV:28.0) Gecko/20100101 Firefox/28.0

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Linksicle
  Version: 1.8.2.0
  Enabled: false
  ID: [email protected]

  Important change preferences

  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.Disk.smart_size_cached_value: 358400
  browser.places.smartBookmarksVersion: 6
  browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
  Browser.Startup.homepage_override.buildid: 20140314220517
  Browser.Startup.homepage_override.mstone: 28.0
  dom.mozApps.used: true
  extensions.lastAppVersion: 28.0
  GFX. Direct3D.last_used_feature_level_idx: 0
  Keyword.URL: http://search.yahoo.com/search?fr=greentree_ff1 & ei = utf - 8 & ilc = 12 & type = 586383 & p =
  network.cookie.prefsMigrated: true
  places.database.lastMaintenance: 1397415422
  places. History.expiration.transient_current_max_pages: 104498
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  privacy.sanitize.migrateFx3Prefs: true
  Security. OCSP.enabled: 0
  social. Enabled: true
  Storage.vacuum.Last.index: 0
  Storage.vacuum.Last.places.sqlite: 1397415422

  Graphics

  Description of the adapter: Intel(r) HD Graphics
  Drivers: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
  RAM card: unknown
  Device ID: 0 x 0106
  Direct2D Enabled: true
  DirectWrite Enabled: true (6.3.9600.16384)
  Driver date: 29/01/2014
  Driver version: 9.17.10.3347
  GPU #2 Active: false
  GPU accelerated Windows: 2/2 Direct3D 10
  Vendor ID: 0 x 8086
  WebGL Renderer: Google Inc. - ANGLE (Intel(r) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
  windowLayerManagerRemote: false
  AzureCanvasBackend: direct2d
  AzureContentBackend: direct2d
  AzureFallbackCanvasBackend: Cairo
  AzureSkiaAccelerated: 0

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: true
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.3
  Version: 4.10.3

  NSS
  The expected minimum version: 3.15.5 based ECC
  Version: 3.15.5 based ECC

  NSSSMIME
  The expected minimum version: 3.15.5 based ECC
  Version: 3.15.5 based ECC

  NSSSSL
  The expected minimum version: 3.15.5 based ECC
  Version: 3.15.5 based ECC

  NSSUTIL
  The expected minimum version: 3.15.5
  Version: 3,15.5

  Check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can try to reload webpages and ignore the cache to refresh possibly obsolete or damaged files.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Log in to the App Store and look under the purchases tab.

• I got two sources of camera the same audio recording - how to use multicam to audio synchronization and display TWO cameras simultaneously

  I had two sources of camera recording the same audio - I want to be able to do is use mulitcam SYNCHRONIZE the audio and video at the same time and be able to use the two clips simultaneously in a video - multicam - how can we use the TWO videos? In Multicam, I can only go to one video at a time - is to detach anyway, so I can trim two camera responsition camera and 1 on a 16:9 screen? What would be the best way to do this? Any help would be welcome - Ty

  

  Two PPut copies the multicam in editing element, one on the other.