MEMORIA USB

Similar Questions

• Problem to eject memory usb and HDD extern

  Whenever I used a usb memory stick or my external hard drive, it is impossible to eject. I try to make 'safe' way but get the answer it is in use, even though I closed all the programs in which I used the memory or the player.
  When I did a safe security on a DVD-disc had used ROXIO and try to eject the DVD I got the answer "enhetsfel", which translated into English would be mistake unity?
  This is a real nuisance.
  My computer is Dell, I have Windows 7 Pro and I only used it for a few months and the problem has been there all the time.
  kindly
  Ingrid Seeger

  With the USB key or external hard drive, it may depend on what you have installed on these readers whether if a winning process accesses these files, for example indexing can be current or you may have installed a program, as opposed to just the data on the disks

  I can't answer for the Roxio err

• O tarjeta memoria usb device

  Necesito UN saber como quito the seguridad contra escritura en mi memoria en el windows targeta 8

  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• Problem USB with Satellite P100-219

  I have problem with USB on my Toshiba. USB peripheral Al are working except memory usb and external hard drive. USB and hard are OK. When I connect to them it says device not recognized USB. I have win 7 ultimate, but I also try XP and it does not work on XP or Win7.

  Can it be related BIOS. BIOS is Phoenix 4.80, Toshiba support was last updated. Motherboard drivers are also updated. But I don't see any fucntion USB in the BIOS?

  Someone has an idea? (all common as uninstalling the drivers or similar metodhs are already done)

  THX in advance

  Tom

  Hey,.

  Load default settings in the BIOS after update BIOS?

  In your case, I would also try updating the chipset driver. You can find the newest one on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Los puertos usb mi pc no retomarse las usb than hago para corregir esto

  Los puertos usb mi pc no reconosen las memorias usb, if miro los puertos usb me dicen as how no reconoce pero correctamente las memorias usb, aunque TR reconoce el control... that debo hacer juegos para

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• How can you transfer photos from external memory card to internal memory frame kodak easyshare ex811?

  Need to transfer photos from an external memory card to memory internal under photo Kodak EX811?  Surely it can be done?

  Need to transfer photos from an external memory card to memory internal under photo Kodak EX811?  Surely it can be done?

  =================================================
  See page 15 of the following guide.

  Frame EX1011 digital camera Kodak EasyShare - for EX811 wireless,
  http://resources.kodak.com/support/PDF/en/manuals/urg00820/Frames_EX_UG_GLB_en.PDF

  The manual States the following:

  ===
  On your computer, open desktop or Windows
  Solution Explorer.

  The image appears as a removable drives
  drive for each connected in the framework, photo source in
  the present arrested: internal memory, memory, USB cards
  devices.
  ===

  So... All you have to do to copy photos inside
  the memory is to drag and drop on the correct drive letter.

  I was wondering why the memory card is not sufficient?

• How to create a USB bootable Windows XP to reinstall Windows?

  The blue screen of death - I need to re - install XP Home.

  There is a download to diskette available but is there a download to a memory/usb stick?

  There is a download to diskette available but is there a download to a memory/usb stick?

  If these are the disks you are referring to:
  How to get the installation discs for Windows XP for installation of boot floppies Those who are not complete installation Windows XP...

  You still need a CD Windows XP Home edition - which should be bootable.  The disks are machines which cannot BOOT from CD - and these machines probably aren't going to boot from USB.  ;-)

• Windows 7 usb dvd download tool

  I downloaded the usb tool but it does not recognize the external hard drive that I plugged in usb. I know the drive works as I transferred my files from document ok. any suggestions

  It will not use a disc external hard USB would have liked. It erases and reformats the disk before making it bootable.

  It works with the key memory USB flash as it can be a boot device.

• USB ports not working no-Windows 7 on Imac

  Hello

  I ve just installed Windows 7 on an Imac end 2012, using an external hard drive and running in Bootcamp.
  Everything went well, Win 7 works perfectly, but all USB ports do not work. Everything I plug into their t doesn't get recognized (flash memory usb cards, mouse usb, external drives...).   They work in OSX.
  All other ports (ethernet, audio, output Thunderbolt) work very well under Win 7.
  What I tried, no still no usb operation:
  -Reinstall Win 7 (just to check that I used a mouse usb, what worked very well right up until the last reboot needed to complete the installation.) Subsequently died)
  -reinstall all software Bootcamp (actually, fix, that you can't just unninstall and reinstall) has done that several times...
  -tried to uninstall the usb ports in Device Manager, I couldn't use my Apple wireless mouse more, so I had to restart after the first. Yes, after a restart, he says it's to install the missing disks, yes they are all perfectly... However - install no USB
  -No, no problems appear in the resolution of the problems of the unit
  Do you have any other ideas I could try?
  Thank you very much.
  Marian Nedelcu
  Here is my config Imac. in case it helps:
  IMac 27 inch Quad-core

  3.4 GHz I7,

  32 GB OF RAM,

  3 to FusionDrive,

  NVIDIA GTX 680MX 2 GB,

  Magic Mouse, Apple wireless keyboard

  Hello

  I suggest you to contact the Apple support and check if it helps.

  http://www.Apple.com/support/Mac/

  Hope this information is useful.

• Device drive hard outside conectado don't con usb no works,.

  tengo un nuevo para el uso como con formatiado hard drive memoria usb cable, the computer accepted el device y me da unknown information design y codigo 43, el disc hard tiene el nr. of mja2160bh SER modelo. Nr. k94nta12tueh're UN toshiba, el device works probado en otra computadora, como resolver is can este problema?

  Look at the entire Web page

  

  Look in the lower left corner of the page.

  

  Where we see English, click on it.

  Then select your language from the list.

  

  OR

  http://support.Microsoft.com/common/international.aspx

• How to fix my usb ports? Not correctly recognize the iPod and other devices of storage correctly.

  I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7.  It works very well but all of a sudden stopped working.  When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes.  Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
  All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple).  The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.

  As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified.  When I click the first device it freezes the computer for awhile.
  I tried to move the ipod to different USB ports that make no difference.  However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially.  These two seem to have resolved themselves in Device Manager...

  In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?

  Hello

  Thanks to community Microsoft can help you with your concern for Windows!

  You are facing problems with the USB ports on the computer.

  Method 1:

  Run the troubleshooter of material and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3:

  You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• Difference between Ready Boost with the virtual memory in Advance system setting

  forward-who knows the difference between Ready Boost with virtual memory, system setting, detail response, ex: ready boost improves memory VGA and RAM, virtual memory only for RAM< example,="" i="" need="" the="" real="" answer,="">

  Hi Kenny,

  Which is defined as virtual memory USB flash drive works as a battering ram. However, they are not as fast as the RAM memory installed real sticks. These flash drives operate much more quickly than the hard drive.

  Thank you.

• ya need to ready boost like thing for the video card memory

  an if there are something like that out there... where?

  I have the alienware i7 - up to 3.5 Ghz with 16 GB of RAM and 80 GB SSD. The laptop is fast enough.  But I still wanted to make it faster. So, I use card memory 32 GB as a readyboost. I found that speed up really. Before using readyboost, it is best to ensure a speed reading / writing of USB or the memory card is high, otherwise you will have not the advantage of readyboost because the bottleneck of folklore.

  In my case, I used the class 10 SDHC memory card for my readyboost. The memory card is still able to take 3D videos and capable of storing video shooting 3D. My conclusion is don't blame the blessing of readyboost, just you have to find the right type of memory/USB with your existing laptop / computer.

  Use readyboost and enjoy the best performance

• Cannot install SP2 because of Win update, error 8024402C

  Can someone please?

  Just a new player 160hard had put in my laptop Toshiba, place the recovery disc, all works well tried to connect to internet (wireless) would not work. We called AOL tells me that I need to get service pack 2.

  Tried to update windows telling me error 8024402 c. I know only a little about computers and any advice would be helpful and right AOL saying I need service pack 2. Wi - Fi was working fine before I put the new hard drive and recovery disk in.

  Thank you

  Hello

  You can download SP2 manually from the Microsoft Web page

  Choose the right (32-bit or 64-bit) SP2 to the system that you are using here.
  You can save this on USB and can install this memory USB flash on your computer.