memory card not read on a4316f

Similar Questions

• Smartphones blackBerry media card not read

  Hello

  New to the forum and received the "BOLD" yesterday... Awesome!

  I buy a memory card of 8 GB and when it is inserted the "BOLD" displays a little message "Media card inserted."  But when I look in the Setup program, memory, it says media card can not be read.  The card is readable on a pc.  I checked the map to find errors.  Very confident the card is good.  In options on "BOLD", media card support: ON, the encryption Mode: None, Mass storage mode support: WE, Auto enable mass storage mode when connected: WE... Help!

  In addition, AT & T could not understand this last night.  Even try a second card multimedia!  This would be a "BOLD" problem?

  Thanks in advance

  I don't think not is a "BOLD" problem, what happens if you connect the device to the pc with the blackberry desktop software, you can see the memory card?

  Check if you can transfer any file between the device memory and the memory first.

• Memory card not seen by Windows XP computer using the USB card reader portable

  I use XP SP2 and have recently had a problem where my laptop does not recognize a card of memory a camera when the USB card reader is connected. It automatically launch an Adobe image management application, but I think that the operating system would still see the USB card reader.

  Hello BSW58,

  Thank you for your message.  We will try to take a look at your AutoPlay settings.

  Plug your camera card.
  Conclusion Adobe once it opened.
  Click 'Start' > click 'my computer '.
  Right click on your card > select ' Autoplay > Adobe is listed as default application?  If so, you can change it here.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• DM4 memory card reader won't read the Extreme Pro Sandisk SDHC card

  I have a dm4-1201us and the built-in memory card reader will not read my Sandisk 16 GB SDHC Extreme Pro memory card. I can read with an external drive, but prefer to use the internal drive. I think that HP needs to update the memory card driver reade.

  I solved the problem by inserting the memory card into the internal drive. Then I opened the Device Manager and found the drive, which was a mistake on the Bill. I deleted this device and check the 'delete the driver '. I did a restart and now it reads SDHC cards.

• Can not format the memory card

  Canon that PowerShot SX 10 IS reformatted not 16 GB SanDisk Ultra.  Camera says memory card error.  Everything else seems to work on the camera.  Is there a way to fix this?

  Your camera specifications say that it will work with the following cards, memory card SD/SDHC, MultiMediaCard, MMC Plus card, HC MMC Plus card.

  Some memory cards note their speeds by a "class." Canon cameras are recommended to be used with nominal class cards 4 to SD (Standard-definition movies) and class 6 for HD (high definition movies) or more because of the large amount of data written to the card. As long as map meets the following standards for the card, the memory card must be compatible regardless of class or the speed rating.

  SD	Standard Secure Digital card supports up to 2 GB capacity.
  SDHC	Secure Digital High Capacity currently supports up to 32 GB capacity.
  MMC	Multimedia card supports up to 1 GB capacities.
  MMCPlus	MultiMediaCardPlus supports up to 4 GB currently.
  HC MMCPlus	High capacity MultiMediaCardPlus supports up to 8 GB now.

• memory card slot problems

  The memory card slot reads 'no photos on memory card' when it is inserted into the slot... He used to work very well... it just started it a month or two it y a. I have a HP psc 2175 all-in-one printer. Is - fixable? Thank you

  Have you tried another card?

  If the card used to work have tried in any other device to see if it will read it?

  If you buy another card SD Please note

  New memory cards are SD HC card, if they are greater than 2 GB.

  This printer will not read SD HC, that they were not avalible when this printer was designed originally.

  The printer will show 1 GB and 2 GB cards very well that these are not the high capacity cards, there are some 4 GB not HC cards around, but they are very rare.

  Sorry it's a physical restraint of an older printer.

• When I insert the camera memory card into the SD/MMC slot, nothing transfers

  Original title: camera to computer Trouble

  When I insert the camera memory card into the slot SD/MMC, no transfers.  Do I need to connect the camera too?  If so, why?  Thank you.

  Hi Paula Sommers,.

  Welcome to the Microsoft community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  ·         What is the brand and model of the computer?

  ·         Did you try to connect to the memory card on another computer and check if it works?

  ·         You get the error message?

  ·         Memory card not detected on the computer?

  ·         You use any application to transfer files from a memory card?

  ·         Were there any changes made on the computer before the show?

  I suggest you to follow the steps in this article and check if it helps:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• Satellite Pro P100-327: memory card reader does not read the Memory Stick Duo

  I just received a P100-327
  aShop http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=121991&Toshib = true)
  According to this page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick®, Memory Stick Pro, MultiMedia Card, xD-Picture Card)", but the pdf manual that comes with it says that it supports not the Memory Stick Duo, Memory Stick Pro Duo or mini-SD.

  However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter, and the reader can't read one of them (they both count as Memory Stick Pro, which should be readable, right?)

  Would I be able to read my Memory Stick Pro cards? Why I can't because it says that I should be able to? Should I install something first?

  Hello

  To my knowledge and according to the manual of bridge housing media supports media type
  -SD memory card
  -MultiMediaCard, xD-Picture Card
  -Memory Stick
  -Memory Stick Pro

  Please note that the Memory Stick and Memory Stick Pro are not the same in the Memory stick Duo and Memory Stick Pro Duo.
  Don t mix.

• memory card reader does not

  Compaq Presaro CQ3000 model series CQ3420AN memory card reader does not read SD cards.

  Where can I find download original driver.

  HP have replaced the Flash drive since it was a hardware failure. Now it's working.

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• My memory card is not read

  Hello!

  I'm having a small problem. My computer has a location where it says SD/MMC, so I inserted my memory card, but nothing has popped up. I went to my computer and apparently it don't the had not read. What should I do? There is a small green light on the computer indicating that it recognizes that there is a card in there, but not on the monitor. Help?

  -Naomi

  Naomi, welcome to the forum.

  When a help request, you must always include the brand / model of the computer or the monitor. This information is necessary for us to review the specifications for them.

  Are you sure that the memory card is the correct format for the reader?  It is the most common problem, we see.  In addition, the reader has read the card in the past?

• USB card reader does not detect memory cards

  memory card

  I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?

  Hello

  If you can't get the working card reader, you can use a card reader that is
  not expensive.

  -------------------------------------------------------------

  To check your version of Windows.

  Check with the manufacturer of system and their forums (if any) for known issues.

  Your other USB devices work?

  Try a system restore to before the drive stopped working if possible.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

• Built-in memory card reader does not

  Hi all
  I use an Acer aspire one 533 with windows xp sp2. My has netbook with a built-in memory card reader that does not detect my memory cards (SD cards).
  FYI, the laptop has recently been recreated!
  Please help me! I am in critical need of it as most of the work on readers of SD.

  It is very possible that you need a driver.  The first place to look is the Acer site.  I couldn't find your model (533) in the list but I found a 5330 model at the following link which includes drivers for the card reader:
     <>http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=52 >
  Start your search here:
     <>http://support.Acer.com/us/en/default.aspx >

  If this does not help, do the Device Manager:
  Start-> Run-> "devmgmt.msc".
  Find your card reader in the list, double-click it to obtain information on the manufacturer and model, and then search for a driver from the manufacturer's website.

  HTH,
  JW

• my card reader will not read my sony memory card

  my computer will not read my memory card from sony camera

  If you go to... Start / my computer... and right click on the removable disk
  letter that represents the location of the memory card is... can you choose
  Explore and see the files on the card?

• Windows thinks flash drive memory card reader - will not let me import the photos.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  ====================================
  Just guess... could this be a hardware problem?

  If you have more than one port... try USB to another.

  Maybe you can connect the camera to your laptop via
  USB cable and see if you can download your photos.

  Maybe the following article offers some ideas:

  (310575) advanced troubleshooting tips for
  General problems of USB in Windows XP
  http://support.Microsoft.com/?kbid=310575

  Good luck finding the solution.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.