Closed during the operation "memory diagnostic tool"

Similar Questions

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• Error: Provider GL is closed during the operation of staggering accrual

  Hi all
  
  I am trying to create a number of expenses of the class 'Transaction' and ' reverse expenditures in a period Future "flag set.
  When I release the batch processing system is giving error "period of provider GL for the stunning Accounting Transaction is closed.
  
  Please help solve the problem.
  
  Kind regards
  Sanjay

  Hello

  If you enter expenses for October, check that October and November are open.

  Dina

• My laptop loses its STARTUP information after it was closed during the night

  original title: STUMPER! My laptop loses its STARTUP information after it was closed during the night?

  I have a problem very intrigueing that I can't understand. I can do a clean install of Vista Ultimate(32 or 64 bit), on my gateway M285 - E Tablet PC. Once it's done and I did not yet updates, if I stop the system at night, I wake up and you try to boot the system and get a blue screen (which finally tells me that my "disk.sys" file is missing. I tried plugging it down in increments to see when this file, in fact, is lost. I stopped for about 1 1/2 hours and it will start fine, but during the night, it won't.

  Then I tried a fresh install and did all the updates available, same thing. I tried to start a "memory test and everything is fine." I even did the memory more intense test (which takes forever, by the way... lol). I also did "chkdsk", as well as all viruses and malware, etc. tests with Norton first Edition.

  I got to the point where I now have 3 separate "disk images" that I created to save time in my software I want to use this system of loading. We're just a clean install, that no update, other clean install available updates. and the last with a clean install with all my software MS Office, Adobe Creative Suite and Autodesk Entertainment and all of their updates.

  I did this for if I'll actually somehow solve this problem I can easily use the "disk image" I want... No...

  Oh yes, I also all my drivers up to date etc.

  Any help on this issue would be greatly appreciated.

  EDIT:

  Another problem related to this situation, it's the hard drive becomes undetectable, so I have to use a software such as Ubunta starting vehicle, which has its own operating system, so I can actually format my hard drive to start the installation process. (otherwise my Vista installation won the same recognize I have a hard drive, not to mention operating system to try to resolve, such as startup repair, System Restore, etc.)

  I finally figured it... xD is a hard drive diver who has been desgned for WinXP and for some reason any were never changed during the installation of Vista on this system or automatic updates.

  It was actually the IDE ATA/ATAPI controllers, specifically the Intel SATA AHCI Controller. I used "Driver Whiz/Detective", which would install most drivers via a base file system are integrated.

  The controller AHCI SATA Intel(r) has not, it only downloaded a .zip file that contains the following files:

  IaStor.sys
  iaAHCI.cat
  iaAHCI.inf

  These were to actually be manually installed. "Even if I had downloaded and extracted the files, when I tried to update the driver"Intel SATA AHCI controller"via Device Manager" through the command of newer driver search. It does not always detect it them, stating that I already had the best and latest drivers already installed.

  Then, for some reason that just kept on bothering me, because "Driver Whiz/Detective kept indicating that it was the best version of the driver for my system.

  So, I finally tried to update the drivers manually by specifying exactly where these files are located on my system. Then he finally recognized them and installed them.

  According to me, given that this system is an older model 'Gateway M285-E Tablet PC', even if it is Vista compatible, he has always maintained the operating system higher available for WinXP, through any auto detect in the BIOS. Even in the settings of the BIOS OS I tried assigning 'Other', because the only other options were Win95, Win98, WinMe, Win2000 and WinXP.

  So having not the 'Intel(r) SATA AHCI controller"recognizing a Vista OS after be closed for a period of time, it would try to load a Windows XP operating system, and have failed to do. Strange, but is the only explanation I can offer for her.

  Thanks for the help,

  Wayne

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• Memory Diagnostic tool

  I copied the tool to my hardrive and then burned it to a CD and then shut down the computer and restarted with the disc in the drive, but nothing happened. I tried to open the file but message says windows cannot open the file. I need to download a file opener to run this tool?

  The file image diagnostic tool (Memtest 86 +) must be burned as a CD on a drive with an ISO burning tool.  Then, you will need to set the BIOS to boot from the CD drive.

• Windows memory diagnostic tools does not work

  Why doesn't windows memory diagnostic tools?

  www.memtest.org . for a free bootable memory testing utility

• Reinstall the hp hardware diagnostic tool

  I don't know what happened to my HP hardware diagnostic tool. I used it once when I got this computer and sometimes since 2010. It happens in the start menu, but do not work. How can I reinstall it?

  Thank you, Ken

  Hi Ken,

  This tool is a tool of Hewlett-Packard. Get you from HP.com. Its updated regularly, then you are better off to go to get the latest version anyway. Just enter your HP product drivers of the help section, and then select your operating system and get the download of the resulting list.

  If you have any specific questions, post it here and I will help you. Let me know how you fare.

  Kind regards

  BearPup

• "The Bank bank of Baroda" site said during the operation 'Java script disabled', but is enabled in preferences > content > enable java script. Help, please

  I use linux (ubunut 10.04). My operation is not complete, during the transaction, the site of the Bank says 'java script disabled', but in edition > Preferences > content > enable java is marked as a control. So, what's the problem? , But this site is running in Windows XP internet explore.

  URL of affected sites

  https://www.bobibanking.com/BankAwayRetail/%28S%28cyyknx5510ur3d55gfjnfpbt%29%29/Web/L001/retail/JSP/user/RetailSignOn.aspx?RequestId=40497583

  you have the Options JavaScript, JavaScript Debugger, JavaScript Deobfuscator NoScript and installed QuickJava.

  Is it possible that one or several are at the origin of the problem?
  Do you know how to use these points?
  U of tried to turn all these OFF, restart FF, visit the site and see if it works?

• Loading screen is not animated, during the operation, but after

  Hi all!

  Here's my problem: I am display a gif animated using the class presented here.

  It is used in a specific class loader that perform an action, while the gif is displayed (the gif is a spinner). Only once the operation is completed, the LoadingScreen came out of the screen.

  Here's my class loader:

  public class LoadingScreen extends MainScreen {
  
      /**
       * The action to be processed during the loading.
       */
      Runnable action = null;
  
      private AnimatedGIFField _image;
  
      /**
       * Default constructor.
       *
       * @param action the action to manage.
       */
      public LoadingScreen(Runnable action)
      {
          super(FIELD_VCENTER);
          this.setTitle(CommonTools.initTitleBar());
          this.action = action;
  
          displayAnimation();
  
          if(this.action != null)
          {
              UiApplication.getUiApplication().invokeLater(this.action);
          }
      }
  
      /**
       * Display the animation during the loading process.
       */
      private void displayAnimation()
      {
          EncodedImage encImg =
              GIFEncodedImage.getEncodedImageResource("loading.gif");
          GIFEncodedImage img = (GIFEncodedImage) encImg;
  
          _image = new AnimatedGIFField(img);
  
          getMainManager().setBackground(BackgroundFactory.createSolidBackground(Color.BLACK));
  
          LabelField label = new LabelField("Connect..."){
              public void paint(Graphics g)
              {
                  g.setColor(Color.WHITE);
                  super.paint(g);
                  }
          };
  
          HorizontalFieldManager containerSpin = new HorizontalFieldManager(FIELD_HCENTER);
          HorizontalFieldManager containerLabel = new HorizontalFieldManager(FIELD_HCENTER);
          containerSpin.add(_image);
          containerLabel.add(label);
  
          containerSpin.setPadding(Display.getHeight()>>2, 0, 0, 0);
  
          this.add(containerSpin);
          this.add(containerLabel);
  
          KasualApplication.isLoading = true;
      }
  }
  

  The problem is that the gif is not animated, while the action runs. But if I have a popup appears at the end of the action to let the loading screen, I see that the gif is animated. As well as the animation starts when the action is complete.

  I think something is wrong in the clock of my son, but I don't see that.

  Could you please help me?

  Thanks in advance.

  It's ok, the solution is described here.

• There are errors during the operation of sanitation

  What started as a quick and easy update turned into a mess. I wanted to update my host esx 3 lab. The first host was a running iSCSI device and the three hosts connect to this target. Now, I forgot first well remove the target on the three hosts. So when I stop this unit the three hosts lost their target and froze. The article KB 1016291 talks about this behavior and I was about to be updated because of this hotfix

  Now, since the first host was trying to go into maintenance mode, but never did, I had to kill the virtual and also rebooted the host machine. Now it seems I broke Update Manager. When I try to remedy or organize one of the three hosts, I immediately get an error: "There are errors during the clean-up operation".

  On the vCenter server, I checked the logs in C:\Users\All Users\VMware\VMware Manager\Logs update but I can't find no manifest error. However, I give some log files that has changed today.

  At this point I don't know where to look now. Restarted host, restart services, etc, etc..

  Any help is appreciated.

  Gabrié

  
  
  http://www.GabesVirtualWorld.com

  Check the var/log/vmware/esxupdate.log. Probably, you will find information more useful.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Laptop stuck closed during the restoration of the system

  Laptop is stuck during the system restore? If I turn off computer manually by pressing the power button / stop it will mess up computer?  How can I fix it? The display shows 'Shutting Down' he was slaughtered like that for 2 hours now. Help, please?

  It is likely mean restoration of the system has failed for any reason any and therefore find it difficult to restart because of this.

  You may want to wait for someone a little more expert than me but normally peak I power the laptop through the main switch off and restart it.  At the start of the computer laptop once again he can ask you to start windows normally or in safe mode and you can then happily that we restart the PC and the system of cancellation/restore again.

• How to pre-fill the user information during the operation to assign tasks

  Hello

  I have a requrirement to pre-fill fields of the form (name, Email, phone etc) when a task is assigned to a user. Users are dynamically specified, so I use the user to find and services to assign tasks to locate and assign them to the user. Since I was a user variable that is the result of the operation of the user to find, I was hoping to get the user information with the attributes of the type of user.

  I tried to use the service to set the value to set the form field (Email) with the email of the user that is object type attribute

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User/email-> /process_data/facilityAuthority/object/@email

  However I get the following error when I try to do - com.adobe.idp.dsc.util.InvalidCoercionException: can not compel object: [B@335d of the type: [B type: interface org.w3c.dom.Document.]]

  Is it possible to retrieve information from the user to the user object? If yes how values for the attributes of the user (name, Email and phone etc...) so that I can fill in the form?

  Thank you
  Nicolas

  Hello

  Please cast chain e-mail before you assign it.

  Example of

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User / email-> string (process_data/facilityAuthority/object/@email)

  For more details, please refer to the forum http://forums.adobe.com/thread/492826

  Thank you

• Move during the cloning and adj. tool brush

  When I use the clone tool or the adjustment brush I have especially this, either to the "fill"-view or 1:1. "»

  Often the Clone tool / adjustment brush must be applied to an area of the image that is larger than what shows in the 1:1 or "Fill".

  But there is no way to drag the image as long as the Clone of long distance / Adj. brush is active, because the hand tool disappears. There is no bar or scroll.

  I wish that the hand tool would be available without closing the tool Clone / Adj. Brush - perhaps by pressing < Ctrl/Cmd > since < Alt > is already taken.

  Or have I missed something?

  WW

  Try holding down the space bar

• IndexWriter is closed during the &amp; quot; Search for occurrences &amp; quot;

  From the FB 3 Beta, I get eclipse material errors indicating:
  
  An internal error occurred during: "find the occurrences.
  This IndexWriter is closed
  
  This seems to happen as a result of the IDE process to highlight other words in the current document that is the word that my cursor is currently focused. The error happens right away, however. I can usually get 30-45 minutes out of the IDE before the problem starts to occur and if I restart it, the problem becomes clear. Is there a way to disable this particular feature highlighting? I'm not really crazy about it anyway...
  
  -Cooking table

  Too bad... I found... that it is the "highlighter" icon in the toolbar at the top.