Memory of dc7600 SFF

Similar Questions

• HP dc7600 sff

  can someone please tell me if a XEON 3050 can be mounted on a HP DC7600 sff. BIOS has been updated with the latest firmware (Bios v 1.60). Thank you

  Hello:

  In a Word, no.

  Here is the list of processors suppored when the latest firmware is applied.

  Processor and speed *. One of the following values	Processors Intel Celeron D:
  Processor Intel Celeron D 331 (2.66 GHz, 256K L2 cache, 533 MHz FSB)	X

• DC 7600 SFF: Upgrading of power on my HP DC7600 SFF

  Hi, I have a DC 7600 Small Form Factor desktop computer and it comes with a power supply of 240 watts. I want to put a x 16 PCI express graphics card and that is why I want to upgrade the PSU for probably a higher with about 400-450 watts. Can someone please guide me which would correspond to what kind of power supply in this case of machine as ATX, mATX, PS3, PS2, etc. SFX. Any help would be greatly appreciated. Thank you guys!

  You are the very welcome.

  I don't think that is correct.

  The main power connector to the motherboard in a standard atx P/S has 24 pins and I believe that if you check the main power connector to the motherboard on your dc7600, it has only 20 pins.

  I know that the card with 1 GB of only prints 29 w.  One with 2 GB of memory probably attracts a little more.

  You must be well with the 1 GB and maybe very well with the 2 GB.

  I like to use this calculator power supply useful for determining if a card that I want to install is a good choice for me without upgrading the P/S.

  http://www.extreme.outervision.com/psucalculatorlite.jsp

• Compaq dc7600 sff keeps closing

  I have a problem with my sff compaq dc 7600 desktop top it keeps close & restart down. I can't put my finger on the problem because it is randomly .i have changed the ram & HDD & still the same thing happens I tested the temperature of the heatsink & apparently not warm all the fans are running. I did the test of memory (OK), I don't know if the bios may cause the problem? So any help would be welcome

  Jim Shepherd

  At any time, Jim.

  I am pleased to have been of assistance.

  Paul

• HP 7600 sff: update bios dc7600, ver 1.61

  can anyone share a link that works for an update of the bios to version 1.61 to the dc7600 sff... Thank you...

  I don't understand.

  You have the files I zipped to the top and attached below (as attachments), correct?

  You have a formatted in FAT32 USB flash drive, correct?

  I just opened the folder with the files it contains and opened the flash drive to an empty window.

  Then I selected all files in the folder, right-click, "copy", then toss above the window open the flash drive and right click "Paste".

  Then, they just copied on my FlashDrive with no problems.

  If I had a dc7600 in front of me right now, I'd be ready to Flash the BIOS.

• The dc7600 fan not slowed down speed

  I'm new here but I have no news for the repair of computers, a problem which therefore left me speechless!

  A customer brought me a Hp DC7600 SFF desktop computer and said that the thing is so loud it doen't want to use it.

  Card"Pentium 4 3.00 Ghz

  2 GB DDR2 533 memory

  320 GB HD

  Win 7

  I lit and was swept away, this thing is so strong that you does not think!

  I disconnected the chassis fan that he calmed down some but the CPU fan turns at 5400 RPM all the time, I can't get the fans to slow down! I tried to use the program Speedfan, it was a joke.

  I am at a loss for what to do and wondering if something on the Board that controls the speed of the fan go haywire. I also upgraded to the latest BIOS and that did nothing.

  When the computer starts, it seems frankly a small liquidation aircraft prepares for take-off!

  What to do, what to do? ANY suggestions would be most appreciated.

  Thank you for your comments/ideas and suggestions. I would recommend he get a newer system because I think it's history! We have done everything that we can and it's time to throw in the towel! Thank you so much!

• problems with ati radeon x 600 in dc7600

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  cpu201 wrote:
  

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  Hello

  I suggest to remove the card, reinstall the drivers for the integrated graphics card and using the onboard graphics for a week as a test.

  If the white screen start and stops disappear then you have found the culprit.

  If you do not need higher resolution graphics, you are definitely better with the embedded video solution. I suggest using the original drivers.

  What dc7600 do you have? (CMT, SFF, or ultra-Slim form factor are the three versions)

  Best regards

  ERICO

• Laptop Hard Drive 3.5 SATA hard disk (please fast response)

  I have a major problem. There is a HP Compaq DC7600 SFF on Ebay that ive been watching for a while. I have DDR2 RAM for her and a 60 GB laptop hard drive. Im going to be to put Windows Xp on the computer. The problem is to a SATA 3.5 hard drive. Is there an adapter for it? I'll need to get a new drive?

  Here is the link: http://www.ebay.com/itm/HP-DC7600-SFF-Pentium-4-HT-2-8Ghz-512Mb-No-HD-/271103764174?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D3652700529279890050%26pid%3D100011%26prg%3D1005%26rk%3D1%26sd%3D280958745061%26
  Help, please

  Hi Ryan,

  Thanks for posting in the Microsoft Community.

  I suggest using your favorite search engine and look for adapter that will allow you to do. You can also contact the manufacturer and check the availability of these adapters.

  Hope this information is helpful and let us know if you need help with Windows. We will be happy to help you.

• video tearing watching the HD video

  Video problem

  I have a hp compaq dc7600 SFF with intel GMA 950, pentium 4 HT dual core 3.0GHZ and 2 GB ram and I'm pretty sure that this GPU is capable of up to 720 p videos, but even on lower quality videos video flies over and half top video is always a little ahead of the bottom in modes full screen

  first of all, I would reinstall the software driver and video film from the place of origin.  There may be a version update available with a fix.

  Secondly, I would then adjust the system by a check disk and Defrag.

  Thirdly, I temporarily disable all startups and services non-microsoft via a clean boot and also disconnect from the internet during playback of the video.

  If all goes well, trying all the above him video playback will be stable.   If Yes, then you can begin to try to understand of the above did the trick on your system.

  If this isn't the case, then you will probably get graphics performance improved via the pci of high-end graphics card.

• My USB Ports suddenly stopped working

  Hello

  I connect a second hard drive on my desktop (hp dc7600 sff) and everything was going well until I was prompted to press F1 to save changes to new material. I realized my mouse and my keyboard are not 'read' via connected USB ports. I tried to change the ports but still nothing, so in the end, I was unable to choose the F1 for the recording of the new HARD drive. I tried all the other ports, but still, nothing.

  I am now faced with a dilemma, I can't go through the login screen because none of my input devices can be connected to the PC, as all modules are connected USB.

  Help. I need to return to my beloved PC usage.

  Hello

  According to the description, I understand that the USB ports do not work.

  I would like to know some information.

  1. Have you tried using the keyboard of the screen?

  Try to use your computer using the keyboard of the screen and check.

  http://Windows.Microsoft.com/en-us/Windows/type-without-keyboard#type-without-keyboard=Windows-7

  We can refer to the suggestions by Mohammed Raieed said on June 1, 2011 and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/why-did-my-USB-ports-stop-working-suddenly/11303612-0809-4A3B-a2ba-c0c6b1234e97

  You can also check:

  https://support.Microsoft.com/en-us/KB/953367

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• HP dc 7900 sff memory update

  Hello, this week the team here helped me to update my BIOS for my Compaq HP DC 7900 SFF. I have four available memory slots, and the computer's specifications say that it can have a total of 16 GB of memory. I could not find the specifications of the type of memory should I use.

  Can anyone here point me in the right direction for a memory upgrade?

  Thank you in advance,

  Peace,

  Mark

  Thank you as always, I paid 90 million dollars for the dc 7900 with 4 GB of ram, burner light scribe, two core 8400 processor. 250 GB hard drive, only really bad thing is that each of the modules 4 memory are a different speed, and it comes up as unknown. I think that this computer can only run as fast as the module of memory of slowese. I'll probably get 4 GB memory and keep it for now, it works great and I like it better than my gateway 560 Gr. I am running windows 7 ultra 64-bit. and I'm happy. I think that if I change the memory, it will peform better year and the next update to the hp 8200. They go for about $300 used on e - bay, and hp/compaq has always been my brand.

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• Compaq elite 8300 sff: upgrade memory for compaq elite 8300 core i5 3570

  Hi experts,
  
  I m using compaq elite 8300 sff on win 7 x 64.
  He has already double 2 GB pc3-12800 (800 MHz). I want to spend at least 8 GB. I m thinking about buying 2 x 4 GB of the same type, is it possible to do?
  I can't find any specs for its bus speed, so what is the fastest, it can handle in case I want to replace the double memory?
  
  Thank you.

  Hello

  Yes it will work as well.

• Memory RAM replacement hp compaq 6200 pro sff

  I have hp compaq 6200 pro SFF, now has only 2 GB of RAM memory and I want to add more to it. where can I find what I need? I have a couple of old computers here, but need to know if I can use these memoirs RAM for this computer. I can't find it.

  Hello:

  Here is the link to the quickspecs for your model...

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04123261

  Info upgrade memory are on page 7.

  Note that you can install 4 x 8 GB PC3-10600 memory, even if the configuration table only 4 x 4 GB.

• Compaq dc7600 CMT acknowledges no more than 3 MB of memory

  I have a Compaq dc7600 CMT.  If I load more than 3 MB of memory in the 4 slots, it only recongnizes 3328.  The bios sees 4 but when memory test jumps after 3328.  In windows, it said 3.24 MB.  Any suggestions?

  Hello:

  This is quite normal and can only be changed if you have installed a system of exploitation 32 or 64-bit.

  System memory gets reserved mainly for sharing memory video and other uses.

  Only desktop with the will of chipset 965 or newer Windows based on the Intel 'see and use' all 4 GB of memory with a 64-bit operating system installed.

  The dc7600 has a 945 chipset.

  And you want to leave the modules 4 x 1 GB in there for the memory works in DDR mode for better performance.

  Or install 1 GB - 512 MB - 1 GB - 512 MB if you do not see the 3/4 GB of memory disappear.