Memory RAM in Elitebook 8560w

Similar Questions

• Where can I find a set of RAM for my Elitebook 8560w 2x16GB?

  The Elitebook 8560w is said to have 32 GB memory maximum capacity in two slots of RAM SO-DIMM 204 pins.  Unfortunately, I did not have chance to find a set of RAM 2x16GB with the correct specifications (1333 MHz or 1600 MHz). Can someone point me in the right direction?

  Hello
  I've yet to see a single 16GB sodimm module. The chipset can support 32 GB of RAM, but in case that the laptop has only 2 slots you are limited to 16 GB only. I've seen laptops with 4 memory locations, but they have been adapted...

• BSOD Atikmpag.sys Elitebook 8560w ati m5950

  Hi all

  I have problems with my Elitebook 8560w. I get the BSOD on startup all the time, when the login screen appears in windows 7. (atikmpag.sys)

  I have tried several things but I can't solve it, the laptop cannot start up if I use the standard vga driver.

  Things I've tried:

  Fresh install Windows 7 x 64, Windows 7 x 86, Windows XP x 64, Windows XP x 86

  Tried all versions of BIOS

  Tried all versions of drivers for video card, both HP and Ati with fres installs Windows.

  It's getting boring, please help me.

  Where can I get the latest version of the video Bios for my m5950? Who can solve my problem.

  Hello hlaca20. I understand that you have a problem with the blue screens that often occur during startup. Is this correct?

  You've tried quite a few steps to solve the problem. I think that the combination of the BIOS update, fresh install multiple operating systems and fresh drivers excluded the majority of software problems. Have you tried to test your equipment?

  If you have not deleted the partition of HP_Tools you can use the built-in tools that provides HP. You should test your memory and the hard disk to determine whether there are problems.

  This document describes how to run the hard drive test. Simply repeat the steps in selection of memory the second time to test the RAM.

  I'm waiting for your answer; have a great day!

• EliteBook 8560w: startup stops at the HP logo

  EliteBook 8560w, 8 MB ram, Intel i5 - 2540M to 2.6 Ghz, AMD over-pants M5950

  Computer was working fine without any problems. Windows Update, now stuck on startup with HP logo on the screen and the text "press the ESC key for startup menu '.

  • ESC key does nothing.
  • Removed the battery, held on substantive residual load lost power button
  • Holding F9 or F11 at startup does nothing.
  • Win7 32 disk turns but will not start.

  Which exhausts my troubleshooting led by Google, any ideas out there?

  Thank you

  Ken

  Try to get the hard drive to see if you can get into the BIOS with F10. If that gets you more far, he can point to hdd bad start to stop.

• Modernization of the EliteBook 8560w - NIVIDIA 1000 M K2000M or DDR3 PC3-10600, DDR3 PC3-12800?

  I have an EliteBook 8560w with 1000M installed.  Is anyone know offhand if I can pass the 1000M to a K2000M or should I stay with the 2000M?

  Also, I am eager to increase the RAM.  I went to Crucial to check their offers and they list DDR3 PC3-10600 and DDR3 PC3-12800.  Which one should I go with?

  Thank you!

  Hello

  Based on the following (July 2012)

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03424153/c03424153.PDF

  1. you can have Nividia 2000 M (page #84). The book shows you how.

  2. What is the least expensive because your machine is running only at 10600 (page #69)

  Kind regards.

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• 11 - inch MacBook Air can move 16 GB memory ram?

  Can a MacBook Air 11 inches go to 16 GB memory ram?

  If this is not the case, what Macbook can go up to 16GB of memory ram?

  I prefer to buy the cheapest and then buy my own ram put in me, but I've heard some macbooks now, you cannot install your own memory, must come installed in the factory.

  It is not possible to update the RAM after purchase on a MacBook Air, MacBook Pro with Retina display or a MacBook 2015 or newer. Click here for the list of possible RAM maximum for each Mac model.

  (144574)

• Pavilion DV6500: upgrade memory RAM of HP Pavilion DV6500

  Hi, I would like to upgrade memory RAM on this laptop:

  HP Pavilion dv6500

  p/n GV262EA #AKB

  Please could you provide me with information what kind of RAM I can use?

  Thank you in advance, best regards

  phav

  Hello

  It is an old machine, which

  Supports up to 4 GB of system RAM PC2-5300, DDRII (667 MHz)
  Supports the following configurations:
  ● 4096 (2048 × 2)
  ● 2048 (2 048 × 1, 1024 × 2).
  ● 1536 (1024 + 512)
  ● 1024 (1024 × 1, 2 × 512 MB)
  ● 512 (512 × 1)

  Kind regards.

• computer laptop 15r-005tx: memory (ram) and storage (hard drive or replace it with SSD) upgrade.

  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  edd609 wrote:
  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  Hello

  Below are the specifications of your computer:

  http://support.HP.com/au-en/document/c04337709

  1. for the RAM:

  housing for module customer accessible/upgradable memory 1 or 2 (depending on model)
  2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the)(Bay Trail processors) DDR3-1333
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the DDR3-1066)(Bay Trail processors)
  Supports dual-channel memory
  Supports up to 16 GB of RAM in the following configurations:
  ● 16384 MB total system memory (8192 × 2) or (4096 × 2) (No 32-bit OS or Windows 7 Home)
  ● total system 12288 MB memory (8192 × 4096 + 1 × 1) (not for 32-bit OS or Windows 7 Home)
  ● 8192 MB total system memory (8192 × 1.) or (4096 × (2) No 32-bit operating system)
  System memory total 6144 MB (4096 × 1 + 2 048 × 1) ● (not 32-bit operating system)
  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)
  ● total 2048 MB system memory (2 048 × 1).

  (Your machine uses 1.7 GHz Intel Core i3-4010U with Intel HD Graphics 4400 so it has 2 slots). Please use the manual next (page 76) to the part number het to buy good RAM. The manual also shows you how add/replace RAM

  http://h10032.www1.HP.com/CTG/manual/c04409502.ppdf

  2 SSD:

  Yes, you can replace the current drive with a good brand, standard SSD for laptops and hardware wise, please use the #59 manual page to replace the HARD drive.

  The fast and easiest way is to buy with at least 512 GB SSDS, clone the SSD HARD drive and install in Bay HARD drive as shown on the #59 page.

  Kind regards.

• Pavilion s3100n: upgrade memory ram

  Two weeks ago, I got my backup to restore the system in the mail, I installed .i have windows vista 32 bit so I installed windows 7 64 bit and works only question is my ram memory says I have 1.00 GB(895_MB_usable).my question can I upgrade my ram 1.00 GB GB 4.00 or higher memory before buying a different memory ram on ebay? Oops I forgot to mention that my old desktop is a HP pavilion slimline s3100n.sorry

  Hello

  Your device supports 2GB maximum:

  Memory upgrade information

  • Architecture memory dual channel (1 DIMM per channel)

• G62 A35ER: memory RAM Max for G62 a35er

  Hi, in the manual for my a35er G62 (http://h10032.www1.hp.com/ctg/Manual/c02542102) says that it can to support up to 8 GB of memory RAM, but the supported higher in the manual configuration is 2x2gb (4 GB).

  How can I know what kind of config my phone supports? (2 x 4 GB - 8 GB total / 2x8GB - 16GB total)

  Right in the manual, the bottom of page 1:

  Supports up to 8 GB of memory system

  Example configurations that they give the list just means that it has been sold, so apparently it was sold only with up to 4 GB of memory, but can use and accept 8 GB (2 x 4).

  This is the memory class module:

  4 GB (only for model 1.1) 599092-001

  https://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1468495663&SR=8-1&keywords=599092-001

  For the 1st generation Intel Core laptop computers, it is important that you use low density 8 black blocks by memory side only.

• Problem updating Windows on Hp EliteBook 8560w - HP ProtectTools Security Manager 8.1

  When I ' try to update Windows 8 Preview of Windows 8.1 on a laptop HP EliteBook 8560w, I ' am getting this error message: "before upgrade you to Windows 8.1 Preview, uninstall these apps: HP ProtectTools Security manager, HP WebCam.

  Hp ProtectTools 8.0.2.1341 Security Manager is installed with the password manager and Credential Manager.

  Someone had this problem and fixed it yet?

  Thank ' s!

  Hello!
  Thanks for posting in the HP support forum!

  8.1 Microsoft Windows (although very good and big update ) is still in BETA (testing) phase and is not officially supported.

  Windows has features upgrade analysis and that it has detected that HP ProtectTools are not (yet) compatible with the new operating system (new update) - still in test.

  Note that this OS is still in beta and may contain bugs. In addition, he brings a few changes that any other 3rd party suppliers must take into account and it will take a while until the program is compatible.

  I recommend - if you want to test the new operating system, install fresh on another computer to test (processing Edition), not a production machine. Otherwise, for your laptops of business - use only the final versions of the software (such as Windows 7 SP1 or Windows 8).

  Let me know if I can help you further!

  IT_WinSec

  Please, take into consideration my location (Europe) and time zones. I'll try to give the answer as soon as possible.

• HP EliteBook 8560w Win8.1 does not fingerprint IE11

  CZE: Hi,

  Vlastnim for laptop HP EliteBook 8560w u Saada jsem provedl update na CZE Win 8.1 Pro x 64. Bohužel in. installation nastroje HP Password Manager 8.0.1.1328 a jeho současti v IE11 přihlašovani nefunguje mi. Přihlašeni počitače funguje v pořadku, ale v IE11 to sice objevi ikóna tohoto nastroje, ikóna problikne, že byl načten, ale do formulaře learn otisk is nic nevyplni.

  I chyba mě, nebo s neni IE11 kompatibilni nastroj u?

  ----------------------------------------------------------------

  Google translation to ENG: Hello,.
  I have a laptop computer Watt HP EliteBook 8560 with whom I made the update 8.1 for Win x 64 in English unfortunately, after installing the HP Password Manager 8.0.1.1328 and part of me does not connect in IE11. Connect you to the computer works fine, but in IE11, well as the icon flashes of this tool icon, fingerprint was loaded, but the form page does not do anything.
  It is a mistake for me or tool is not compatible with IE11?

  Ignore the box below this one. This site won't let me edit or input text from my smart phone without using the code box. I got my fingerprint reader to work in Windows 8.1 (both windows login and in an internet browser) using the blog that I mention in my post at this link: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-J070CA-Windows-8-1-Validity-Fingerprint-Reader/td-p/3025495/highlight/true/page/3 . It's, I believe, the sixth (6th) post by Melissa_01 (me) on the page in the link.
  

  Hey, I got it to work for me. Read what I posted in another thread (page 3) and see if it works for you too. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy stems-and-Software/HP-J070CA-Windows-8-1-Validity-...
  

• HP 14-r046tu: adding memory / RAM

  Hello

  I bought a HP 14 Notebook PC (14-r046tu) sometimes in November 2014 and after a while, I noticed that little by little, he began to slow down on me. I already uninstalled the software that I don't normally use and clean up disk space, but he gave little improvement. Research, an option I can use to improve performance is to increase the memory (RAM) of this machine. If I can ask for opinion/s about this if this is possible for my machine or if there are other ways to improve the performance of my machine.

  Thanks in advance

  Hello

  RAM: Please use the following site to scan your machine. It will tell you exactly what you need and where to buy, or you can also use the information to buy elsewhere:

  http://www.crucial.com/USA/en/systemscanner

  The following specification is for your machine:

  http://support.HP.com/us-en/document/c04382942

  It's a basic machine, cheap, low end. I wouldn't have money to improve this machine, save money and buy a better machine will be much cheaper in the end.

  Kind regards.

• Can not open opening Adobe Photo DeLuxe 4.0 said not enough memory RAM

  Original title: opening Adobe Photo DeLuxe 4.0

  Does not open, says not enough memory RAM. I have 6 GB of RAM!

  Hello

  ·        What operating system is installed on your computer?

  ·        You did changes to the computer before the show?

  ·        What is the full error message that you receive?

  Try it out below mentioned suggestions and check if this may help:

  Method 1: Change the memory allocation for PhotoDeluxe Business Edition:

  a. start PhotoDeluxe Business Edition.

  b. Choose file > Preferences > discs to work.

  (c) in the use of physical memory section, change the used by PhotoDeluxe set to 75%, and then click

  d. OK.

  e. restart PhotoDeluxe Business Edition.

  Method 2: Rebuild and resize the Windows swap file:

  a. close all applications.

  b. right-click on my computer and choose Properties from the context menu.

  c. click on the performance tab, and then click virtual memory.

  d. Select the option 'Let Me specify my own virtual memory settings'.

  e. set the Minimum and Maximum virtual memory to a value equal to twice the amount of

  your computer's installed RAM, but it is not greater than 64 MB. For example, if you have 16 MB of RAM, the value

  the Minimum values and Maximum to 32 MB. If you have 48 MB of RAM, set the Minimum and

  A maximum of 64 MB. (Do not include any RAM for a RAM, such as Connectix RAM expansion utility

  Doubler).

  f. click OK, then click Yes in the dialog box confirm virtual memory settings.

  g. click close in the System Properties dialog box.

  h. click Yes in the dialog to change system settings to restart the computer.

  Contact the Adobe Photo Deluxe forum to get help.

  http://forums.Adobe.com/thread/360663