Memory upgrade 4000 series problems

Similar Questions

• New HP Pavilion DM1 4000 series max memory card

  Hello

  I am looking to buy a new ultraportable laptop and like the look of the new series DM1-4000. However, it seems that there are two versions available in the United Kingdom - the 4004SA DM1 and DM1-4027SA. The data sheet pdf, the noticeable difference only seems to be the maximum amount of memory installed (4 GB in the 4004, 6 GB in the 4027). I don't understand not why HP would impose this limit as both have 2 user accessible so-DIMM slots - my preference would be to upgrade the memory 8 GB by replacing both of the 2 GB so - DIMMS with 4 GB (after installing W7 64-bit rather than the stock windows W7 32 bit, it comes with).

  My question is this - is correct these limits of 4 GB or 6 GB or is it just a marketing thing?

  Interesting, the Maintenance and Service Guide (PDF) DM1-4000 series indicates the memory installable max is 8 GB.

  Thanks in advance. Any ideas much appreciated.

  Edit: Also noted there is a model 4020SA and 4020EA... both specify also 4 GB memory Max.

  There is not much sense, it?

  The maintenance manual makes it clear that portable computers running AMD processor have 2 slots of memory each hold 4 GB of memory.  See Chapter 1, page 2.

  Now, the Intel PC base seems to indicate that they cannot contain only 4 GB maximum memory - affordable housing from a single client.

  http://h10032.www1.HP.com/CTG/manual/c03084091.PDF

  Paul

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• Veriton M498G memory upgrade problem

  I'm trying to age 5 years Veriton M498G memory upgrade my son of 4 GB to 12 GB now when I upgaded to Windows 7 64 bit.

  The original 2 GB key still works fine and the 2 GB key that I added back a bit works very well too (4 GB total).

  But when I remove all the sticks and put in a new 4 GB stick the computer crashes in the POST just after the BIO 1024Mo of RAM (!). Looks like that the BIOS does not like the 4 GB stick! Compensation of the BIOS did not help.

  Back original memory makes the computer works perfectly.

  I am well aware of the memory manufacturer/type compatibility issues.

  I tried 4 different memory of 4 GB sticks from 2 different sources with no luck.

  My questions are:

  1. the Veriton M498G motherboard or BIOS has any limitation on the size of the memory card?

  2 I missed a setup or configuration to let the BIOS see the 4 GB memery stick?

  3. a more recent BIOS help? (the computer uses the original BIOS from 2011)

  4. is there a solution runs the endless trial and error of purchase and return of USB keys?

  The system is:

  Acer Veriton M498G

  Processor: Intel i3

  S/N: PSVAQ03005 *.

  MFG date: 18/01/2001

  Thanks for your help.

  Michaud

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to all names, email addresses, telephone numbers, full of serial numbers, etc.]

  Hello

  The crucial memory modules too.

• Palvilion dv6-7138us memory upgrade

  Hello, I have problems finding the maximum memory a dv6-7138us support. If anyone knows this as the maximum amount of memory I can install or maybe a link to the news. Also did anyone knows no improvement with a faster memory or it is simply better to stick to 1600 MHz.  Thank you

  Hello

  Faster RAM can't help, you can have a very fast car the roads and the aunique laws allow you to go to something. What you can do, break the laws? Back to your machine, please use the very reliable seller next, they guarantee their RAM works:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+DV6+series/Pavilion+DV6-7138us-upgrades.html

  Kind regards.

• Dv7 1260us memory upgrade

  Hey guys I'm looking for to upgrade the memory of my laptop. It's a HP DV7 1260US. I went to a few local computer stores, but they don't have it. I am up in canada. Anyone have any idea where I can find the ram for it?

  I think it's what I'm looking for pc2 6400 sodimm 8 GB 2x4gb sticks

  

  Hello

  You can buy RAM from the following link or use the information (including the price) to buy also:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-1260us-upgrades.html

  Kind regards.

• HP 21-2014: HP 21-2014 in a computer, Ram memory upgrade question

  Hello, I have a HP 21 2014 all in one computer. He now has 4 GB Ram memory and an AMD processor. I was wondering how it would be possible to increase the Ram up to 8 GB. Is there a certain number of model or brand of Ram do I need to buy? I looked a few things on Frys Electronics, but obviously I'm naïve. I really want to upgrade memory because I have some games which really lag on this computer, even if it is new, and I know it takes more may work properly. I wanted to see if someone can point me in the right direction. Price is not really a problem, I just want to know what would be a better job for this specfic HP model. Thank you!

  Hello

  Yes, you can upgrade to 16 GB:

  Memory upgrade information

  • Memory channel architecture

• LaserJet 4000 TN: The printer HP Laserjet 4000 Series PCL5: error state &amp; quot; message &amp; quot;

  I sent the following message to Microsoft after a ' update:

  I have a printer HP Laserjet 4000 Series PCL5 TN which worked beautifully "black only" for many years. A recent update (Windows 10:12 / 22/15) seemed to put the printer in the "printer error state", when you try to print a simple document. It has been my default printer for a long time. I followed the suggestions of printer "windows 10", that is, unplug and plug - check cable (not USB) connections, remove the printer from the list of print devices /, reinstall drivers HP for Windows 10 (following suggestions from HP on HP site) - nothing seems to work. It has a network cable connection, but it is directly connected to my computer, no other computers are connected. See screen capture below. I even did a "recovery" of before 12/22! Any suggestions? Thank you. GM

  I received instructions from Microsoft:

  You run the printer Troubleshooter and identify the cause?

  If this isn't the case, we will do that by visiting the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Check also the update (KB number) has recently been installed on your computer.

  You can also restore printer drivers and check.

  To restore the driver, you can follow the steps below:

  • Press Windows + R on the desktop screen.
  • Type devmgmt.msc and press ENTER.
  • Expand the printer drivers and do a right-click on the driver and select Properties.
  • Go to the driver tab and click driver RollBack.

  Can I assume that you use a parallel cable to connect the printer to the computer.  If you do this is a known problem that can be solved.  Go to Device Manager and then click ports.  Double-click the lpt for the printer port, and then click on device settings at the top.  Change the default setting of the middle box checked in the box below to use any available interruption. I would also check the legacy down.  If necessary, turn the computer off and then turn it back on, but most of the time this solves the problem without a reboot.

• HP Probook b 6450 memory upgrade question

  Hi all

  I seem to have a strange question seeks to upgrade the memory in a HP 6450 b probook (i5 - 480 m & ATI card). The laptop came with 2 GB of sps p/n 598856-002, which is ram 1333 mhz 1.5V with the manufacturer being ramaxel. I ordered and installed a few sticks of kingston 4 GB

  http://h30094.www3.HP.com/product/SKU/10473659/mfg_partno/KTH-X3BS/4G

  Mounted to them and all appeared to be as well as the operating system (win 7 32 bit pro) showed the recognized as 8 GB stick and 3 GB usable, the bios also reported 8 GB as well. However the moment that a 64 bit OS (Linux or Windows) is tempted to run just the laptop falls down or crashes

  I already tried this upgrade with two sticks of crucial memory but had exactly the same problem, so think about crucial memory was the question I put to the supplier and ordered the kingstons rather.

  I saw very similar question mentioned here:

  http://www.TomsHardware.co.UK/Forum/328016-30-memory-upgrade-ProBook

  and

  http://superuser.com/questions/580512/HP-ProBook-6450b-not-booting-after-memory-upgrade

  My instinct suggests this notebook can be very picky about the memory chips, it may have to be a 4 GB key 16 chip versus chip 8 4 GB sticks.

  Thoughts and help on this would be greatly appreciated.

  Thank you

  You are the very welcome.

  Yes, I have never, ever install any module of memory in my notebooks from HP that does not 16 chips.

  All the chips I use - 2 gigs and up, have 16 chips (8 on each side).

  Never had a problem.

• HP dm1 4000 series keyboards

  Hi, I bought the HP dm1-4310nr U.S. netbook and are having a problem.

  As you know WE use different keyboard configuration that we have here in Europe.

  I was hoping to replace my pc keyboard by purchasing the Northern version of ebay.

  Only flaw is that it is not any version of this keyboard model says in the market if.

  Some other 4000-series keyboard is compatible with it?

  Hello

  There are many keyboards for dm1 machines, they are the same SIZE with yours, but as mentioned on my first answer: you have bought a very special, not available on other markets so same size but may not work. For the keyboard from another supplier, sorry I don't know.

  Good luck.

• HP LaserJet P2015dn printer range: printer LaserJet P2015 memory upgrade

  In HP "LaserJet P2015 [c00623611) series User Guide" which was packed with the printer, I learned that the memory upgrade chips are 100 pins minimum speed of 66 MHz.

  In HP HP Support Center "Printer LaserJet P2015 Series - specifications of the printer" I have been informed that the memory upgrade chips are 144 pins minimum speed of 66 MHz.

  What document of HP is correct?

  Aren't we glad the Boeing team who did as 747 you and I fly on doesn't have that same attitude on the correction of the inaccurate documents from 10 years. Programmers (I used a) and tech writers waste popping popcorn, drinking coffee and put on day of NCAA brackets in a day it would take to change all the various translations of a pdf most time.

  It is not surprising that HP stock has declined 80% in the last 4 years if the employee point of view prevailing.

  But thank you for the passage of my suggestion/request/grumble along their.

  I think we can close this discussion.

• HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

  I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

  Hello:

  Please see if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

  Paul

• cannot start win8 after memory upgrade

  Hi I have a HP Pavilion P6813w

  It came with win 7 64 bit installed with 6 GB of ram
  I created a duel with victory 8 boot
  It was working fine until I got my 16 GB of ram today
  Well I got the 16 GB in and turn on the computer to get to this
  Recovery
  your pc needs to be repaired
  the application or the operating system could not
  be loaded because a required file is missing or
  contains errors.
  file:\Windows\system32\winload.exe
  error code 0 xC0000001
  but when I'm out of 8 GB it starts and displays the 8 gb of ram.
  I tried to do the repair installation dvd options since the win8 and even tried it recover usb option
  When I use the usb option I get error 22 grub 1.5
  so my question is why win8 will not load with additional memory
  and even win 7 does not load
  It gives me the same error
  my computer shows he takes supporting up to 16 GB
  4 GB ram sticks
  IM experience pc users and cela just stem me
  any idea what could be the problem

  Hi Wallace,

  There is a limit of memory for Windows 8. For version 512 GB for 64 - bit and 32-bit maximum 4 GB is allowed.

  For more information, see the links.

  Limits of memory for Windows versions 

  The memory upgrade (RAM): HP Pavilion p6813w Desktop PC support

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• 9150 memory Upgrade - Question once again

  Good day to all,

  I have 2, Dimension 9150 who receive upgrades. The first machine was fine with OS WIN 7 / 32 PRO. Updated BIOS (A07), not installed the required software, no problem, everything no problem. RAID driver install also, no problem. Problem I have is the memory upgrade. Get machine 2 update, but not until this problem is resolved.

  Been revised post old topic of memory and still has not found an absolute remedy to my question. Machine (1 and 2) are 2 GB; 4 512 PC2-4200 (all locations showing on bios config).  I installed 4; 1 GB PC2-5300. Problem? Must not like system accepts 4 GB maximum and is also accepted speed Max.

  My problem is 2 GB in slot 1-2 (white) are good, no problems (boots to windows without error beeps). Check the BIOS and find sticks of memory are reading fix it. When I add the other 2 sticks of 3-4 (black), error on boot beeps and lights 1-3 lights telling me memory error.

  I recently updated a dimension 4700 and used memory not dell Komputer Bay. Could see all the modules and showed 3.76, so I bought the same memory for this machine. I know that in the past, Dell machines are "FINICKY" when it comes to memory.

  Is this the case? If so, Crucial memory has been discussed and I might add 2 (2 GB each)? That's what I was not able to see the answers. Part of the crucial says Yes, post only memory. The other Yes was that I could use sticks of 2 GB. Spec note 1 GB is max stick, per slot.

  I am at a loss, if you're looking for an idea on a direction.

  Yes, low density 2 rank INTEL chipset compatible ram works fine. The other way to say it isn't that 380 Precsion ecc ram works fine.   The GX620 has the same problem where we will see more ram by the bios but total ram is limited to 4 concerts by the chipset.  Upgrade to a precision 380 allows a full 8 gigabytes of ram.

  You could put 4 x 2 gig and he would show even in the bios but the ram would not be usable and the machine does not start with 64 bit OS.

• Alienware Area 51 R2 memory upgrade help

  Hello

  I recently ordered an Alienware R2 with 16 GB of memory. It is still being built / shipped. I have decided to upgrade the memory up to 32 GB, however, I can't find any information to see if there are homes of free memory opened on the computer when it comes with 16 GB? Could someone tell me?

  In addition, because I don't have yet a series number, I couldn't find the memory upgrade to this unit on the Dell Web site. Could someone tell me a reference number for the upgrade of memory? 2 x 8 GB

  Thank you very much for the help!

  You will probably get a better response if you re - this post in the forum of Alienware Club where people hang out.