Merge 4.1.1 and Win8 Bootcamp

Similar Questions

• Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

  Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

  I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

  Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

  I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

  Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
  Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

  If someone could have some drivers or set which will slow down the fan under 64-bit windows?

  T.

  Hello

  You can set Windows Power plan settings in order to improve the cooling system.

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

  Try this settings:
  Plan (Toshiba power save) optimised battery
  Technology Intel Turbo Boost (BIOS) - disable
  The CPU always low frequency

  From my experience, this should reduce the noise.

• TouchSmart IQ500 and Win8?

  Hello.

  

  HP TouchSmart IQ500.

  System #: FK936AA-ABG

  Serial No.: 3CR - B32 (hidden for security)

  Model #: IQ518a

  What is the position of HP on this machine and Win8?

  I have one of these machines running Win8 64-bit, but it often gives problems.

  Problems of video driver with the screen going white (which I learned by reading the other messages, is quite a common problem with Win8 on TouchSmart machines), and recently, problems, where the sound cuts just by itself, and there is nothing you can do to make his work again made hear.  Sometimes if you wait awhile it works again, but the sound can fail just half way through a movie without apparent reason.  There is NO sound alert, weird or anything - he just died and you can't have her again from there.  SOMETIMES reboot solves the problem, but only with about a 75 percent success rate.  It isn't the application to the origin of the problem with the sound - no application that uses sound not coming out-even the his Windows in the Control Panel application.

  Thus, at the end of the day, can someone at HP please confirm me if this model machine is actually compatible with Win8?

  I'm guessing that it's NOT supported at the moment, because I was not able to find drivers specific for this model machine Win8, unless I'm not looking for the right place, and it is quite possible!

  Thanks for any response.

  Graeme1974,

  It is a forum for users of peer-to-peer supported. HP maintain no official presence on this forum. Any response received by an employee is one who is clean and not HPS.

  It is position of HP on Windows 8 and any computer Windows 8 non-HP;

  Not all the features of Windows 8 may be available on all PCs.

  Your specific experience with Windows 8 will be determined by the capabilities of your PC.

  HP provides upgrade instructions and the drivers will be available for the majority of Windows 7 systems sold after October 1, 2011.

  If you want to restore the original operating system after the upgrade, you must create HP recovery before you put on level support.

  Please note that if you purchased your system before October 1, 2011, HP has not tested these PCs or developed the drivers for them or upgrade of Windows 8 instructions. The upgrade of these systems can be difficult, if not impossible.

  Please send Bravo

• Bootsect.exe in Win7 and Win8 installation disc

  Hi, I would like to know what is the different between Win7 (build 7600) and Win8 bootsect.exe (build 9200)? It's all both are the same version to run this command bootsect nt60 to create bootable USB drive? Thank you.

  Hello

  The question you posted would be better suited in TechNet IT Pro support. I suggest you to check it out with TechNet Pro support for more information.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=w8itpro&Forum

• Every time I try to use HDR Pro images merge but then disappear and do not appear on the screen

  The last three or four times that I tried to use HDR Pro images I choose merge but then disappear and do not appear on the screen?  If I convert to TIFF and opens in HDR Pro images will appear and I can do my corrections.   What gives?

  Try a reset first preference: Hold Ctrl + Alt + Shift / Cmd + Opt + shift as you start Photoshop start. Select 'Yes' when asked if you want to continue with reset.

  Benjamin

• Synchronization between XP and Win8.1, both on FF 32.0.1 does not work, why?

  I'm trying to get the new synchronization to work. I have two machines, one XP and other Win8.1; both have FireFox 32.0.1 (and say they are completely up to date).

  Sync on each machine goes to the same account. 'Manage' the settings are the same. The machines are on the same network segment.

  I get to the point where I believe that this is the case: "After log you in, Firefox Sync will begin synchronizing your information on your devices connected.", but nothing does.

  Why am I missing a step, a button, some security settings?

  Whereas, my thought is that Sync has not been installed on this PC yet.

  When you click the button open the Menu ' 3-bar ' , which appears under the white area with the icons above to customize?
  Sign in to Sync?

• Satellite L755-129 and Win8.1 - cannot access the BIOS settings

  Hello

  I have a L755-129 satellite and I have the version of windows 8.1 update in my laptop. I want to open the bios of my computer and I can't do it?

  What is going on? Also I can't find in the windows recovery Panel. Key F2 and F12 does not work, when I press it, the laptop starts beeping beep and starts in windows.
  Can someone help me? I don't want windows 7 I like windows 8.1.

  Thank you for your help

  It's really good that you posted this question. So far on this forum many people ask the same questions, but all have been at the origin of new machines of Win8.
  Now we have the situation with the old machine Win7 but with Win8 preinstalled.

  Solution for other people needed to proceed to a complete stop and after doing this, it was possible to enter the BIOS settings. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  This situation does not for me so here's a question for you:
  When you start your laptop, I guess you can see the Toshiba start screen. With F2 option is shown on the bottom of the screen?

• How to merge two partitions, C and D

  Hello

  I HAVE A HARD DRIVE BUT ITS IN TWO SEPARATE PARTITIONS, ALL MY EXISTING FILES AND PROGRAMS ARE ON DRIVE C:\, DRIVE D:\ IS EMPTY. I WANT TO MERGE D:\ BY C:\ SO MY LAPTOP DISPLAYS ONLY A READER.

  HOW CAN I DO THIS WITHOUT LOSING ANYTHING ON C:\ DRIVE?

  Thank you.

  Hello

  I recommend also using the Partitions Magic 8.
  I use this software for and I m very happy. It of very easy to use.
  This application also contains a management of partitions. You can change the sizes, create partitions for the use of Linux or join the partitions.

  If you google a bit for this software, you will find that a demo free downloads.
  If you can test it.

• Satellite C855 and Win8.1 - Webcam does not work

  I have problems with my webcam. using windows 8.1.

  When I start the Toshiba Web Camera Application it comes up with a window of Toshiba saying ' web camera initialization failed. you check the legacy of camera and restart the application or device "."

  I download different drivers from the toshiba site, but when I try and open the zip file, it says "windows cannot open this file, the zip file is not valid".

  Any suggestion please?

  > When I start the Toshiba Web Camera Application...
  Can you please tell us which version do you have installed? I can't find this tool for your laptop available for Win8.1 model.

• Qosmio X 870 - 15 d and Win8.1 - pop-up message "Test Version of Flash Cards.

  Hi eveyone!

  Since I've updated my X 870 - 15 d native Windows 8 for Windows 8.1, I get a popup message saying: "+ * TOSHIBA Flash Cards * + (title) + * Win8-TestVersion * +" and two buttons 'OK' and 'Cancel', whenever I start; all that I have the button click, disappears from the pop-up

  How can I get rid of this irritating popup please?

  Hello

  This issue is not known to me, but can you please tell us something:
  Have you updated Windows by following the instructions in http://www.toshiba.eu/innovation/generic/windows8_1-message/?
  You have reinstalled a few tools specific to Toshiba and utilities Toshiba download page (updated Win8.1)?

• Satellite L300-1AP and Win8 - black screen on startup

  Hello

  My computer starts as usual, the first screens come well and it will also in the journal of the user on the fine screen.

  However when he was usually in the Windows 8 home screen it goes just a black screen.

  The mouse icon is still there and the work, but the only thing that I can get up is the Task Manager.

  No idea what it is? Eventually a failure of a Windows 8 pilot as everything else seems to work?

  Thank you!

  I agree with Timox; It would be interesting to know if the laptop is working correctly by using another system; in the best case with the system pre-installed and pre-configured by Toshiba or Windows 7.

  I m interested also in the installation procedure you install Win8? Did move you from Win 7 to 8 Win or did you do a fresh install?

• Apple Support communities / software Windows / Boot Camp upgraded to El Capitan and now Bootcamp windows does not start

  First of all, thanks for all the help I get.  I upgraded a couple of days to ELC.  After that, the boatman partition disappeared.   I managed to get bootcamp to be visible again in the Finder with a reconstruction of my GPT4.  But when I try to rebuild my MBR, I see only 3 partitions and non of them are the bootcamp partition.  Here are the results of the different queries can help the expert here what I'm doing wrong.

  My mac is a 2010 MBA.

  sudo fdisk/dev/rdisk0

  Password:

  Disk: geometry / dev/rdisk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-174512312] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [174921952-1269536]

  04:00 0 0 0-0 0 0 [0-0] unused

  Sabri-MacBook: ~ bb_504$ sudo TPG - r - vv show/dev/rdisk0

  See the TPG: / dev/rdisk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/rdisk0: MBR suspicious to sector 0

  See the TPG: / dev/rdisk0: Pri GPT to sector 1

  See the TPG: / dev/rdisk0: GPT Sec at sector 236978175

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 174512312 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  174921952 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  176191488 60786655 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  sudo gdisk/dev/rdisk0

  Password:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): P

  Disk/dev/rdisk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 00005B53-75AE-0000-2978-0000C1210000

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 6 sectors (3.0 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 MiB EF00 EFI system partition

  2 409640 174921951 83.2 giB customer AF00

  3 174921952 176191487 619.9 MiB AB00 Recovery HD

  4 176191488 236978142 Microsoft giB 0700 29,0 base data

  Command (? for help): R

  Recovery/processing command (? for help): O

  Size of the disk is 236978176 sectors (113.0 GiB)

  MBR disk identifier: 0x0000121F

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 174921951 primary 0xAF

  3 174921952 176191487 primary 0xAB

  1 Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  2. using the 'o' command 'r' menu shows you the current MBR (that matches your output of Fdisk). Two of them contain 3 entries. When you use the command 'h' and provide the list of partitions to Gdisk, it will build a new MBR to match your GPT based on what you provide in the partition list.  Please see No Bootable Device Error - early 2014 Macbook Air for example.

• Creates a new partition and now bootcamp is not recognized

  Hi, I hope someone can help me.  I saw the thread here (repair Boot Camp after having created the new partition), but I had a suite of wire trouble and my setup may be different.

  I have an iMac with boot camp and created a new partiiton.  Now my windows boot camp does not start.  I see it in system preferences > startup in startup option disk, but when I have if I get the message 'no bootable disk '.

  If I restart and hold down the option, I see that my mac to start drive and not the windows partition

  Here is my system info:

  Boot camp is disk0s5

  

  

  

  I would appreciate it so no guidance in getting my new bootable Bootcamp.

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

• How to merge the C drive and unallocated space

  I recently had a new 1 TB HDD in my count and then I had to download Windows XP Pro as my old hard drive crashed. In under disk 0 disk management, I (c :)) 128.00 GB and to the right, I have not allocated 803,52 GB.)  I'm not sure how it happened.  I guess that something I had put on Windows XP Pro.

  My question is that I can combine the two together.  The C drive and the unallocated space.  There are no other disks shown but C.  Thanks Reta

  It happened because you have installed a copy of "gold" Windows XP, (an original version without a service pack).  Released as Windows XP did not support 48-bit LBA so it truncated the disc to 137 GB (128 GB binary) and the rest of the unallocated disk, slipstreaming of service packs for the Windows XP CD would have allowed windows to correctly see the entire disk.  The only way to solve this problem now is to use a third-party partititionneur.  You can use the free trial version of BootItNG to merge partitions.  You do not need to install BootItNG, when you get to the Setup screen simply cancel the installation and you will enter the maintenance mode where you will be able to partition work.

  John

• While the research on how to correct an error in the observer of events, W32 tried merging a .reg file and got an error message saying could not access the registry, why?

  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  Hello, I'm under win xp pro svc pk 3, ie 8, x32bit.

  I received an error in the Event Viewer system for time synchronization W32. Help box said not to worry if it's a computer for the home user, but I'm tired of doing all the time, every day, so I tried to find a way to get rid of it. On bing, I found the above Web site and tried to merge the nist servers in my registry but I kept getting msg. :

  Impossible to import c:\doc and set\adm\dsktop\timeservers.reg: the specified file is not a registry script. You can only import binary registry files in the registry editor.

  the first msg not acceding, and I guess it was because I had the registry open at the same time. Anyway after that I couldn't import, just add the items in the registry manually.

  My question is, really, was performed correctly by the copy of the list of servers of time in the text, paste it into a file and you try to merge?

  Appreciate any assistance with this issue.

  Just for info:

  If you see a message similar to the following:

  Impossible to import c:\Documents and Settings\Jose\Desktop\enableit.reg: the specified file is not a registry script.
  You can only import binary registry files in the registry editor.

  That means either that your registry import file is missing the top line (or it's the wrong syntax):

  Windows Registry Editor Version 5.00

  or the file you are trying to import is not a valid registry import file.