Satellite A660-18 bootmng is missing

Similar Questions

• Re: Satellite A660 - Toshiba - Web Camera missing Application utilities

  I have a new Satellite A660 with camera web inbuiilt, but there is no software of Toshiba (as stated in the manual) to run the web camera, nor face recognition software.

  I have not checked anything else yet, but not in the programs directory and nowhere in the start menu.

  Any help where to find the software?

  Hello

  Hmm. If the webcam is available on this laptop, good software must be installed as well.
  Please check all the programs-> Toshiba if the webcam is installed.
  In addition, you may visit the European driver Toshiba page and download the driver for the Webcam for Win 7 64 bit.
  Facial recognition software is also available on the driver page.

  PS: It's very interesting to know if the two applications would be available after the new recovery procedure. If you want you can try to recover the laptop using the HDD recovery procedure.

  Welcome them

• Satellite A660 Win7 - power management system action center is missing driver

  I replaced the battery on my laptop Toshiba A660-15J and a few months, is back with the battery high capacity and now Action Center 7 win keeps popping up with the message that I need to download and install the missing driver for power management system.

  The power supply has been replaced not at all, nothing has changed, except for the battery.

  Costs of light on the functions of the laptop, as it did before the battery change.
  It turns on and is red and after a few hours, it becomes white and the battery level shows that it is 100%

  The problem is that this center of windows 7 says that missing one driver ACER? -> WTF?

  The link to download it from DOES NOT

  It seems odd that the link that windows provides its on a site of acer, but since part´s manufacturers other´s manufacturers use it does not at all surprise me.

  I want just the clarification and confirmation of what I have to do here, and why to toshiba Service does not show this update?

  I read that the BIOS update can fix this, however there is NO bios update for my laptop.
  I have also contacted MICRO$ OFT but I'm still waiting for a response from them.

  I also read other messages on various toshiba forums that relate to this same problem, but they used to say that the model is not supported by toshiba in this country...

  I clicked on the link on this forum directly on the site of Toshiba Australia, so please do not tell me that my model is not supported on this forum of Toshiba Europe!

  The exact message:
  Download and install the driver for your power management system
  Your power management system is missing a driver.
  To resolve this issue, follow these steps:
  Press or click on to download the driver of the A + c + e + r society Web site
  Download and extract the driver files
  Type and click on save or save as, and then save the file to your desktop. If you can t choose where to save the file, you will need to find and copy it to your desktop. When you download files, most of the web browsers save them in the folder to download on your computer.

  > I replaced the battery on my laptop Toshiba A660-15J and a few months, is back with the battery high capacity and now Action Center 7 win keeps popping up with the message that I need to download and install the missing driver for power management system.

  Maybe that's the problem. The new battery is fully compatible?
  Satellite A660/15J is an Australian mobile phone model.
  Here, I found some accessories for this model:
  http://www.MyToshiba.com.au/products/computers/satellite/A660/psaw3a-15j06t/accessories

  Compatible battery are:
  Toshiba battery (12 cells / 9000mAh / Li-ion / 10.8V) PA3819U-1BRS
  Toshiba battery (6 cells / 5600mAh / Li-ion / 10.8V) PA3818U-1BRS

• Satellite A660-1FH fails to back off with Win7 64-bit

  Hi, a friend of mine asked me to watch his Satellite A660-1FH (PSAW3E). It is currently running windows 7 64 bit. There initially could not activate so I said I'd take a peek.

  It just would not start the power on, it would go beyond the initial screen then cursor would appear at the top on the left and flash a couple of times and freeze. I started and you press f2 to view the bios and the HARD drive was top of the list so I pressed f10 and saved and started. starts fine then he thought may have been an accident that has caused and continues in windows and update for him.
  then rebooted and froze! It seems when the restart is selected, it does not restart, everything freezes.

  I tried to use hirens resumed but it cannot see the HARD drive when it is started! weird. I got in the car and he ghosts for safety.

  Earlier I installed 8 company windows x 64, and it presents the same question. the drive works fine in other pc so you need another piece of equipment. I had already updated the BIOS under win7 and checked all drivers.

  I just got a strange win8 startup message saying that a boot or partition file was missing and could not start but him repressing the power button, it starts well.

  It does not always restart under a clean install of win8. I came here because I found a post with the same or similar issue. Any suggestions? Thanks Mark

  > it just would not start the power on, it would go beyond the initial screen then cursor appears at the top on the left and flash a couple of times and freeze

  The blinking cursor appears in the upper left corner indicates a malfunction or memory from HDD. I think you should check both sides.

  You said that the drive works fine in another PC. Do you hear the HARD drive?
  If so, then the HARD drive is OK and the RAM is probably the troublemaker.

• Satellite A660 HDD failure

  Hi all
  I've had the laptop for someone to look at.
  The laptop model is TOSHIBA SATELLITE A660, Windows 7 Home Premium 64-bit.
  This is not my laptop, I can't tell if the person has been using some software dengerous like spyware or any other, but I suppose that it is very likely.

  + WHAT IS THE PROBLEM? +
  There is a problem with the HARD disk, a message all the time, SMART 'failure predicted on hard drive '. PC is running, but slow, and not always to start Windows. Has more no guarantee on the computer, the store where it was purchased no longer exists. I don't have a recovery CD and Windows is stored in the recovery partition.
  The owner of the PC complained of strange noises from PC for a while, but I didn't hear myself.

  + WHAT I'VE DONE SO FAR? +
  I searched the forums for an answer, but I have not found.
  I tried to look at the HARD drive, it is stable, not loose and seems fixed correctly.
  First thing I tried was the disk check, but it wasn't even to start. When I restarted the PC once I gave a chkdsk command, there was a black screen with info, it will start the process in 10,9,8... 1 sec, he stuck to 1 sec and never begun the process. After some time I left he thinks, PC off by itself (AC adapter / CC was pulged in all time).
  I tried to find the computer, I brought to the factory settings, but it did not help. The problem is always present and laptop is terribly slow. BTW, I had to try twice, once there was an error: error F3-FFCC-0006, I discovered, that the error appears when the AC adapter / CC was missing, but it is pluged in all the time.
  I brought the BIOS to its factory settings, which is probably not relevant.

  + WHAT I WANT TO KNOW? +
  Is there a possible way to repair the HARD drive?
  OK, I agree that I probably need to buy a new HARD drive, there is only one thing I would like to know. How can I get WIN7 installed without the CD? I know that I have the CD key and license, but how do I get the CD? I do purchuase CD from Microsoft? Purchuased of TOSHIBA recovery CD solve my problem?

  Thanks for any help.
  I will appreciate it asap, cause this laptop is required by the owner of that an option to send the laptop to the service and wait weeks for some 'help' is not an option.

  > Is there a way to repair the HARD drive?

  No, what you can do is to repair / fix the bad sectors on the HARD drive, but if there is a physical problem, it will not help

  > How can I get WIN7 installed without the CD? I know that I have the CD key and license, but how do I get the CD?

  The key belongs to the image of Toshiba that I n t think that it will work to activate the system installed using MS Win 7 disc
  However, you can download Windows 7 image of page Microsoft (google for it)
  Then you can burn the image to disk using Nero or other burning application supporting iso burning and could use this disc to install Windows 7

  Otherwise, you can order the Toshiba recover drive here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A660-047 - lack of WAN Miniport drivers

  I have a Toshiba Satellite A660-047 PSAW3C-047017 running Windows 7 Professional 64 - bit.

  I just downloaded Norton Ghost 15 ISO, created the installation CD, installed Ghost and ran the validation pilot of the installation CD. I received the following message:

  > Following devices have no drivers in the Symantec Recovery Disk.
  >
  > WAN Miniport (IKEv2)
  >
  > Detailed information on these devices are given below
  >
  > Description: WAN Miniport (IKEv2)
  > Class: Net
  > Class Guid: {4d36e972-e325-11ce-bfc1-08002be10318}
  > Material Id: ms_agilevpnminiport
  > Material Id: MS_AgileVpnMiniport

  It seems a little research on Google, it's more than a level higher than a real hardware device interface. I don't really know what it's for, or what is the probability I will miss it in the case of a recovery. Should I spend time worry right now?

  The thread said http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/wan-miniport-sstp-driver-problem/f83493ae-8127-47dd-a7b7-7e5b3460b6a6 should not 'more often' but I was wondering if exceptions could be encountered during recovery (when I want to use WiFi to browse and restore my system to the State non - factory, as well as to make diagnoses on a HARD drive may be bad).

  Hello

  AFAIK Miniport WAN is a part of the Ethernet controller and you will need to install the LAN / Wlan driver.
  You should go to control panel-> network-> Lan-> properties control.
  Here, you should check if all protocols are installed.

  But as you have already said: it of not really a necessary point

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Satellite A660-158 want covers do not

  Since I bought the laptop (17.09.2010) I'm not using the recovery option. But once I want to use them he does not leave. Not on F8, not on F12, not on F11, not on 0 (zero). The utility called Toshiba Recovery Disk Creator tell me it's something wrong with the hard disk drivers, but I do not install the disk drivers, they are original.

  Anyway I have install the clean Windows 7 from the MSDN DVD and use my number series, all is well here, but the ECO button want does not. All buttons works fine but not touch ECO. It will beep, but is not and the Eco utility (program and all the drivers installed). Finally, with the score HDDRECOVERY all right - it is the first partition on the disk and hidden.

  Why I can't start the recovery? I am now pressed a lot a lot of buttons one by one, but recovery not starting not not... :(

  > Why I can't start the recovery?
  Your answer is:
  >.. .i install Windows 7 clean from the MSDN DVD and use my serial number
  When you install own OS the created recovery options Toshiba and bootloader is rewritten, so there is no way to start the HARD drive recovery process because the option fix my computer in advanced startup option will be missing.

  In the history I n t understand the first part. When you get the new Satellite A660 you will have factory settings. When you start for the first time you will be able to create using recovery disk pre-installed Toshiba Recovery Disk Creator. Have you created this disk?
  By default, recovery image is saved on a small partition of HARD drive. It is not visible in windows Explorer, but in the disk management options and if you change something here, this Toshiba tool will be not have full access to this small partition.

• Satellite A660 - Bluetooth problem - disappeared from the bar of the State etc.

  Dear all,

  frustrated newbie.

  Bluetooth has disappeared from the system on my Satellite A660 tray and I can't work out how to get it back.
  It worked a few months ago, but since I don't use it everyday,
  I did not notice when he disappeared.

  I tried the fsquirt.exe thing, but the icon opens a window that does nothing (it seems to me that bluetooth is off but I can't find where to turn it on and Fn + F8 does not work).

  I have downloaded the driver atheros, which is extracted to a temporary folder and then does nothing.
  I think I need to uninstall - reinstall but do not know how to proceed.

  Any ideas appreciated.

  arghh

  Arfur

  All this is a bit complicated on your laptop. I assume that stick Toshiba BT (BT software) is always pre-installed on your machine. Can you please check?

  Using the FN key combination you can toggle WIFI and BT. When you say that it does not work how to understand this? Can you turn on WLAN on/off? BT option IS missing? You can use the WLAN button placed between the keyboard and display (function keys)?

  Please check such fundamental things in first and post more details. Later we continue to discuss reinstalling drivers.

• Satellite A660-1FM - maximum resolution of the display of the external monitor

  Hi all

  Maybe it is (probably) an easy question to answer, but I have a Satellite A660-1FM and want to use it with my external screen Samsung Syncmaster (forgot model). I got a HDMI-> DVI - D adapter and everything is going well, but here's my question:

  The page of specifications of toshiba for my laptop (http://uk.computers.toshiba-europe.com/innovation/product/Satellite-A660-1FM/1096013/toshibaShop/false/) shows a capacity of external resolution of:
  Maximum resolution: 2 048 x 1 536
  Max refresh rate: 100 Hz
  Resolution No interlaced with the maximum refresh rate: 1920 x 1 200

  But I get what I call resolution HDMI standard (no wonder, I guess) when connected HDMI-> DVI - D to my external monitor. I have already run this monitor on my desk at highest resolution of 1080 p, so the monitor is capable.
  Wondering what I'm missing here, or is that a matter of graphics card specification is more than possible to the output of the laptop?

  Thanks for any help
  Andy

  Hi Khaled,

  What is the native screen resolution of your external display?
  Can you connect your laptop and monitor with HDMI cable only why you need an adapter?

  To be honest I don't understand your question. If you already have the Full HD screen resolution why do you need more?

• I can't get my Satellite A660 - 11M

  I have a Toshiba Satellite A660 - 11M.

  I want to wipe it to factory settings. I tried to do this using a disc I made when I got the laptop. However, when I use this, I access the menu screen is but do not have the HDDRecovery option at the bottom. I tried to make a new disc using Toshiba HDD Recoery but he says he has «no area HARD drive recovery»

  I have a feeling that the problem is that my score HDDRECOVERY was damaged. How can it be solved?

  A few weeks ago a program I used wrote the disk D: (HDDRECOVERY). I didn't want him, but it was a program stupid lol. Has it caused irreparable damage?

  I really need to wipe it quickly, can you help me please fix it?

  Hello

  This missing option occurs if you want to install the recovery image using installation of HARD drive and it has nothing to do with the use of recovery disks.
  When you use recovery discs, you will see another menu on the screen.

  I put t know what have you done in the past, but obviously recovery image stored on your laptop is not used or damaged. So only option is installation with recovery DVDs.

  How al it works you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  If you have any other questions you are welcome.

• Re: Satellite C650D-12J - BOOTMGR is missing

  See previous thread Re: Satellite C650D-12J - recovery of missing HARD disk image
  Posted the: 06-Aug-2011 16:07 in response to: bobmc

  I am back with another problem.
  I ordered a Toshiba Recovery arrived ok.
  I inserted in the drive and follow the instructions.
  Everything is fine but when he got to the F = u = \HDDRecovery\SWImg \ZZImg\11675XSP5_swm copy (5/8)
  He said 0 file copied
  ERROR = copy of splitpart or CRC failed
  Press a key to continue.
  I pressed a button and the screen went white.

  Now when I try to start, I get a message:
  BOOTMGR is missing
  Press Ctrl + Alt + Delete to restart
  whenever I do this, I get the same message.

  Any thoughts on what to do next?

  Check my answer to your first thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=248800

  BOOTMNG is missing error is displayed because the installation of the OS was not successful.

  Try to boot from the recovery disc once more, perhaps you will be able to install the operating system.
  If this isn't the case, you must check if the HARD drive is OK. For this, you can use a tool called Drive Fitness Test. This s free software which would test the HARD drive.

  If the HARD drive is ok and you still can't install the OS by using the new recovery disc, then it means the recovery disk is defective. In this case, you will need to replace this drive.

• Satellite A660 - display problems, very dark display

  Hello

  I'm at the end of help please.

  I have a Toshiba Satellite A660 PSAW3A-07P00R.

  recently, it has been very, very dark display on the screen, almost impossible to see.
  I tried the following the problem solved.

  1. set the brightness to the MAX in the operating system, power management, etc.
  2 reset the BIOS to default settings.
  3. set the brightness to the MAX on the laptop brightness settings.
  4. check the external display via a VGA cable. tested ok.
  5. I bought a new LED 16 "screen but the new screen has the same problems. If I understand correctly, LED screens (1 data cable video on the bottom of the screen to connect to the motherboard) have the "inverter" built into the display, so appears not to be a problem of map display, brightness or graphics. I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

  is there something easy, I missed, or something I have not tried?
  has anyone else experienced this problem and solved?

  Thank you in advance.

  > I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

  As much as I know there is no FL inverter then, or you can override the display or the cable (LCD/FL)
  LVDS cable) with a new one and the test shows again.
  I found a compatible: K000103140 LVDS CABLE

• Satellite A660 - 11 M - how to activate WiFi?

  Hello. I have a Satellite A660 - 11 M with key features
  -Windows® 7 Home Premium 64-bit authentic (pre-installed, Toshiba-HDD recovery)
  -Intel® Core i7-720QM processor

  WiFi:
  Compliance: Wi - Fi®
  Network support: 802.11b/g/n
  Manufacturer: Broadcom®
  Wireless technology: Wireless LAN
  Manufacturer: Broadcom®
  Wireless technology: Bluetooth® 2.1 + EDR

  It works fine, but after that the children were using the machine and close I don't see the router using the wifi.

  I tried the hardware switch on the strip between the keyboard and screen media and answered none of buttons; I suspect that this may be the problem.
  FN F8 brings to the top of the screen of fn wifi but clicking on it will not allow it. Troubleshooting tells me to "Turn on Wireless Capability", but as stated above, the band of the media seems to be inactive. I can normally connect cable to the router.
  I tried a system restore, but that did not help.

  So even if I have a sinking feeling I'm missing something obvious, all thoughts before you start reloading driver wifi or reset the BIOS? If this is the recommended approach, which driver command band of media

  Thanks much for any help.

  Hey,.

  The bright buttons between the keyboard and screen are controlled by added value package and if none of these keys work correctly, you must reinstall value added package. You can download this tool here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you checked the Device Manager If WLAN card is listed correctly? Maybe you have to update the WLAN driver because he confused s upwards. This update of the WLAN driver you will find on the page of download driver Toshiba too :)

• Satellite A660 3rd party WLAN does not work

  Hello

  I had a problem with my WLAN adapter so I used to replace.
  Currently, I have installed card Broadcom Dell Wireless 1397.
  It has been defined by Device Manager and drivers have been installed.
  But it is impossible to turn on the WLAN.
  When I click the buttons activate WLAN, it just back to the OFF position.
  I also use Windows 10.

  Thanks in advance!

  Hello

  I own Satellite A660 - 16 M. Initially, it was equipped with Broadcom BCM4318 WLAN card. I decided to replace it with an Intel Centrino N-6230 dual band with 3.1 Bluetooth card. Replacement process was fairly easy, the problem was to make the new card working group. I use Windows 10 as an upgrade to Windows 7 Home. As you can imagine that the utility flash cards stopped working after the upgrade of the system, but Windows 10 has managed to cope with BCM4318 since the original drivers and Windows 7 registry entries have been always working in the background. The WLAN button above the keyboard worked, was so orange the LED in the front of the laptop.

  Situation changed completely with the new Intel Centrino 6230 N WLAN card. Despite he properly recognized by device with all the necessary drivers automatically responsible manager, I was unable to have the WLAN button and the LED orange work which is to turn on the radio (the card WLAN itself, its possibilities of wifi). The weird part is that the Bluetooth worked without any problems.

  The solution was to put a small piece of electrical tape on the 20 PIN of the new WLAN card to prevent WLAN DISABLE State presented to the motherboard. So RADIO WLAN is always on, so Windows 10 own wifi tools were able to switch on the WIFI network and... I see now all (2.4 GHz and 5 GHz) wireless networks. Of course the WLAN button and the orange LED still haven't work (it seems that it is somehow hardcoded to support only the original BCM4318) but I don't love about it. The most important is that I'm now a lot more capable wireless network inside my laptop card.

  I hope that the solution above works in your case, 8stack. Watch the attached files to see what she looked like, as in my case.

  Best