Merge the output dll dll dependencies

Similar Questions

• Question to merge the output lines

  Oracle: 11g
  
  Sample data:

  WITH sampleTable AS 
  (
   SELECT 9999 as id1,9998 id2, 'BOB' as fname, 'JOHNSON' as lname, 1111 as trans_id FROM DUAL UNION ALL
   SELECT 9997 as id1, 9996 id2, 'MIKE' as fname, 'ANDERSON' as lname, 1112 as trans_id FROM DUAL UNION ALL
   SELECT 9995 as id1, 9994 id2, 'CHRIS' as fname, 'WILLIAMS' as lname, 1115 as trans_id FROM DUAL 
   ),
   sampleTable2 AS
   /*(
   SELECT 1111 as trans_id, 9999 as id, 5555 as translate_id FROM DUAL UNION ALL
   SELECT 1111 as trans_id, 9998 as id, 2451 as translate_id FROM DUAL UNION ALL
   SELECT 1112 as trans_id, 9997 as id, 2342 as translate_id FROM DUAL UNION ALL
   SELECT 1112 as trans_id, 9996 as id, 6765 as translate_id FROM DUAL UNION ALL
   SELECT 1115 as trans_id, 9995 as id, 2111 as translate_id FROM DUAL UNION ALL
   SELECT 1115 as trans_id, 9994 as id, 9643 as translate_id FROM DUAL 
   )*/
   sampleTable2 AS
   (
   SELECT 9999 as id, 5555 as translate_id FROM DUAL UNION ALL
   SELECT 9998 as id, 2451 as translate_id FROM DUAL UNION ALL
   SELECT 9997 as id, 2342 as translate_id FROM DUAL UNION ALL
   SELECT 9996 as id, 6765 as translate_id FROM DUAL UNION ALL
   SELECT 9995 as id, 2111 as translate_id FROM DUAL UNION ALL
   SELECT 9994 as id, 9643 as translate_id FROM DUAL 
   )
   SELECT s.fname, s.lname, s.trans_id,
          CASE 
              WHEN s.id1 = s2.id THEN
                   translate_id
          END AS translate_id1,
          CASE 
              WHEN s.id2 = s2.id THEN
                   translate_id
          END AS translate_id2
   FROM sampleTable s, sampleTable2 s2
   WHERE s.trans_id = s2.trans_id

  Output current:

          FNAME     LNAME      TRANS_ID     TRANSLATE_ID1     TRANSLATE_ID2
  1     BOB     JOHNSON      1111          5555     
  2     BOB     JOHNSON      1111                    2451
  3     MIKE     ANDERSON 1112          2342     
  4     MIKE     ANDERSON 1112                    6765
  5     CHRIS     WILLIAMS 1115          2111     
  6     CHRIS     WILLIAMS 1115                    9643

  Desired output:

          FNAME     LNAME      TRANS_ID     TRANSLATE_ID1     TRANSLATE_ID2
       BOB     JOHNSON      1111          5555          2451
       MIKE     ANDERSON 1112          2342             6765
       CHRIS     WILLIAMS 1115          2111             9643

  Note: The table in the above example will really have thousands of rows in the database that I work currently in.
  
  I realize that I could accomplish the 'desired' output by creating two queries in doubles, id1 and id2 other recovery and then recovery by simply making a UNION of these two queries. Other then that there is a more optimal (best performance) method to achieve my desired output?
  
  Published by: user652714 on October 13, 2010 09:13

  SELECT s.fname, s.lname, s.trans_id,

  Max)
  CASE
  WHEN s.id1 = s2.id THEN
  translate_id
  END) AS translate_id1,

  Max (CASE
  WHEN s.id2 = s2.id THEN
  translate_id
  END) AS translate_id2

  FROM sampleTable s, s2 sampleTable2
  WHERE s.trans_id = s2.trans_id
  Group of s.fname, s.lname, s.trans_id

  Thank you...

  Published by: user10857924 on October 13, 2010 12:01

• Use the table 2D input and output dll

  Hi, I have a problem with table 2D used with library funtion call to get the table of DLL.

  uint16_t is defined as unsigned short, who is unsigned 16-bit in labwindows.

  In the following two codes origFrame.height is 1024, 1280 origFrame.width.

  QCam_Err DLLEXPORT FrameGrab(void* handle, uint16_t frame2D[1024][1280]) {}
  
  uint16_t * p;
  
  p = (uint16_t *) origFrame.pBuffer;
  
  Copy each pixel of the 2D array
  
  for (int i = 0; i)
  
  for (int j = 0; j)
  
  frame2D [i] [j] = * p ++;
  
  }
  
  }
  
  }

  2D array is passed to the DLL in the form table 1 d, I also tried table 1 d below but to get the same numerical results.

  {QCam_Err DLLEXPORT FrameGrab(void* handle, uint16_t *frame1D)
  
  uint16_t * p;
  
  p = (uint16_t *) origFrame.pBuffer;
  
  for (int i = 0; i)<(origFrame.height*origFrame.width);>
  
  frame1D [i] = * p ++;
  
  }
  
  }

  Both of these methods gives me the same numeric result with regard to the numbers in the output array.

  Something interesting is that the output array has the right size, but all the numbers in the table are about ~ 40, while my expected in all values table is 60.  I know, because I use this to get values of a pixel in a camera and I know that the values of the pixels.  I also used the same code in LabwindowsCVI as a normal program built as exe.  Everything works fine and I get my expected values.  So apparently miss me something here, when I changed the settings to make dll.

  What I've done wrong?  Thank you very much for your help!

  Best,

  Charles

  
  

• On Windows Seven, how the LabVIEW to deploy the ws2_32.dll on my target right?

  Hello

  On Windows Seven, because ws2_32.dll is cited as a "KnownDLLs" (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\KnownDLLs) when LabVIEW is making my custom DLL which depends on ws2_32.dll, he deploys the system32 DLL ws2_32.dll instead of the 2012 LabVIEW RT image, ws2_32.dll, causing dependencies error displayed on my lens... And it is not possible to change the "KnownDLLs" list because it is a powerful mechanism of Windows System.

  I noticed that on Windows XP, ws2_32 isn't in the "KnownDLLs" list and I thought everything would be fine (I have not tried).

  To solve the problem temporarily, I changed my DLL custom so that it only depends on wsock32.dll, but this is not satisfactory for me...

  Could you help me?

  Thank you for your answer, but I'm sure that RT de NI LabVIEW 2012 supports the WinSock2 API as the ws2_32.dll is located in the directory "C:\Program Files (x 86) \National Instruments\RT Images\Base\9.0" and "2012.exe DLL Checker" program seems to confirm.

  I did a few test since my first post and I have solved my problem:

  Warns we LabVIEW to automatically download the dll in the target (and download the bad ws2_32.dll), I downloaded manually with FileZilla right DLLs (for example the ws2_32.dll located in the directory... Instruments\RT national Images\Base\9.0) in the directory system/nor-rt/system of the target RT PXI. Now, when my program according to ws2_32.dll in the target, he concludes that the dependencies are already resloved and all transfers LabVIEW is fine!

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Satellite M70-360: CEekey.eke can not run because its the missing dll

  I accidently deleted the ekecioctl.dll and now whenever I start my laptop (Satellite M70-360) I get an error message saying that CEekey.eke can not run because its the missing dll. Anyone know where I can download the dll?

  Thank you

  Hello

  The CEekey.exe seems to be part of the Toshiba E - key utility.
  Therefore, you should try to reinstall this utility to obtain the keys working again.

  Another clue; have you tried to restore the operating system to the early time point?
  XP supports the System Restore tool. You can easily put the BONE at an early stage and the E key should work again I hope ;)

• Equium A100 (PSAA4E) the system DLL, user32. DLL has been moved in memory - HHCTRL.ocx

  I have a Toshiba SATELLITE A100 (PSAA4E)
  At the start of this notebook get the following message:

  "The system DLL, user32. DLL has been moved in memory.
  The application will not work correctly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.ocx
  occupied an area of address reserved for windows DLL system.
  The vendor supplying the DLL should be contacted for a new DLL. »

  The audio drivers from RealTek and the latest version 5.10.0.5188
  I don't really know why it happened.
  Any help would be appreciated.
  In addition, any body knows why my voice on Skype seems to be deformed with a high noice height even if the hearing quality is correct.

  Post edited by: Landric

  Thanks for the comments
  I see you found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  The same solution was already posted in the thread suggested.

• Qosmio G10: Scanner uninstall problems - cannot load the external DLL

  I tried to uninstall an old scanner HP my Qosmio G10 and received the message - internal error unable to load or call external DLL, please contact you provider for more information. If I could use the product to restore disc and all saved this would restore the system to the way I bought it or are ther programs on the CD-ROM tools & utilities.

  I am a novice at this so any help is appreciated. Thank you emdpar

  HI Michael,

  You can certainly use the recovery of the product CD to re - install your system to its original state, but this seems a little extreme just to remove an old hardware device to your configuration. You should not need to use the tools and utilities disk unless it contains items that are not in the recovered system.

  I assume the error with the uninstall wizard is because only the original installation used a product CD that cam with scanner HP and the missing DLL is on this CD.

  Kind regards

• Call Java DAQmx.dll: Y at - it a new version of the DAQmx.dll NET c# for CLR 4.0 library

  I need to use the API of NET c# in a java program, so I tried to use Jni4net library to fill the dll in Java. I get errors however, because the version of daqmx.dll that I have been built against CLR 2.0.50727. Is there a version of the dll for CLR 4.0 (corresponding to .NET 4.0 or higher)?

  If someone know another way to call the java daqmx.dll?

  Hello

  I eventually found the version I had to work.

  I have the DAQmx.dll assembly. I got an old software project developed for the device, I'm working on that. I guess that the original developer obtained from the disk of National Instruments.

  Thank you

• When I run the exe file, it should load the niscope_32.dll why?

  Hello:

  I used scope in my program functions,

  and then I did it in the exe file and the installation file,

  but when I make them to another computer,

  To load the niscope_32.dll, what should I do?

  Hi ylongwu,

  You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

  Drivers and updates
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  

• Strategies for bridge (structs) containers to the c dll table ++

  Does anyone have any suggestions for the passage of tables of containers (C structs) between TS and c ++ dll? I have exhausted my understanding here. I noticed that when I create a type which is an array of containers (size = 1), allow to move like a C struct but exclude the container as C struct, and then type presents itself as a struct rather than an array ref in the C++ dll parameters dialog box. I was hoping that I could exploit something here, but not luck.

  As a last resort, I could try to flatten the structures in an array of double, pass it as a VARIANT and rebuild on the other side - yuck!  I have hundreds of different transfers to manage that way, so I'm still holding hope for something better.

  In C/C++, I think that if you define a structure with a table like this:

  struct {Topic2

  int sizeVar;

  Topic1 array [size];

  }

  Then, the size is fixed. It doesn't really change because the compiler whenever you allocate a variable of the type of structure, must allocate enough space to store all the items that you have declared in the definition of struct. In other sizeof (Topic2) includes the full size of the array defined using the constant of 'size' that must be a constant, not a variable. If you want something more dynamic, you declare your structure as follows:

  struct {Topic2

  int size;

  Topic1 * array;

  }

  you dynamically allocate the memory for the array pointer and release it dynamically when you're finished with it.

  A simpler approach, that you can take, if the size range is quite small, is to make the Board as large as size max you will ever need and add another Member to say how many items in the table is actually being used. And it seems that your def struct is close to that, but not quite right. For example, I'm sure that you can not use the size for the variable field and the size of the array. Instead, you probably need something more like this

  struct {Topic2

  int numElements.

  Topic1 table [taille_max];

  }

  Hope this helps,

  -Doug

• Where can I find the User32.dll header files?

  Hello

  Is it possible to get the header file and a file of the User32.dll library or if I want to use a function by a User32.dll where can I get the parameters and arguments for this function that is required to call.

  Thank you & best regards

  Samuel J

  System engineer

  CAPTRONIC systems

  [email protected]

  Hello

  In general you don't need 'user32.h' because the functions declared in Winuser.h (you must include Windows.h).

  Otherwise, if you need user32.h only, you can get this file as well as debugging tools

  After installation, you will get this file in C:\Program Files\Debugging Tools for Windows\winext\manifest\user32.h

  Kind regards

  Andrey.

• I_RpcBindingIsServerLocal is not found in the RPCRT4.dll dynamic link library

  Windows 2003 64-bit, the server crashed after installation of windows update and keep restarting with blue screen stating 'Procedure entry point not found I_RpcBindingIsServerLocal in the RPCRT4.dll dynamic link library' there is no way to access Windows in safe mode or in any other way tried to use last know good configuration, safe mode. The only way is to access Windows Recovery Console in which we tried to repair and run the chkdisk but unfror. with no luck.

  How can we overcome this problem without upgrading them to 2008!

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• age of empirs 3 the D3Dx9_25.DLL file missing

  hope someone can understand it.

  3 hours trying to solve this problem and im top.

  When I try to start the game the error message appears ip "is missing the D3D9_25.DLL file.

  I tried to download the update to fix, I tried the installation manual and the problem persists.

  I tried to copy and paste the files associated with the program folder age empires only to get a message saying "see the DXERROR.log or DIRECT.log file.

  which is also usless.

  any help would be greatly appreciated.

  Thanks in advance,

  Krzysztof

  Hello
   
   
  Have you followed the steps in KB 910813, which was proposed by Vinod N
  http://support.Microsoft.com/kb/910813
   
   
  Let us know the status of the issue.