Messaging subtopic problem

Similar Questions

• Recent messages have problems (latest version 6.18)

  Hi, my recent Messages have problems, please consult, I click on it but I show message and I need to read, I wait to solve the problem in my recent posts. Thank you.

  

  See for example this:

  http://community.Skype.com/T5/Windows-desktop-client/notifications-that-won-t-go-away/m-p/3551399/hi...

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• A message from problem Outlook Express crashes, cannot remove

  When I get a message from problem in Outlook Express, marked with a blue "down arrow" which means a low priority, it crashes Outl. Expr. so I can't post it, remove it, or anything.  I have to close Outl. Exp. and reopen it and avoid to come to her.  I received another message from the same retailer online with the same arrow and was able to remove it, but this one puts me.  I tried connecting with the email client in Windows 7 on my wife's cell phone to see if I could delete it, but he apparently left the server.  It seems therefore that the message has disappeared, but still in my Inbox.  How can I get rid of him?

  Turn off the preview pane so that when you select, OE try not to make it.  Then hold down Shift as you remove them.  It should disappear. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• What does this error message "a problem has been encountered a problem of personalized treatment tools manifest file (C:\Windows\system32\MSCFGTLC.» (XML)"and what can I do about it?

  For about a week now that I get a lot of 'freeze' and try to eliminate contradictory processes that cause my Vista Home Premium 32-bit w / SP1 system to "lock" onto me.

  I tried but can't do a restore effective because none of my points of store go back enough to solve the problem.

  So I try a "clean boot" as described in article http:// support.microsoft.com/kb/331796.

  My system has installed significantly since turning off half of the services non-Microsoft configured to run at startup.

  But every time I launch msconfig.exe I get this error message-"a problem when processing custom tools manifest file (C:\Windows\system32\MSCFGTLC. '"). XML ".

  It is not stop fiddling with the boot configuration, but I don't think I should get this error. Any ideas on what it is and what to do about this?

  HP Pavilion dv6700 Notebook PC AMD Turion (TM) 64 X 2 Mobile Technology TL - 60 GHz 2.00 3.00 GB RAM

  Hello ch4rlie1949,

  Run The System File Checker utility:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the appropriate Microsoft versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search .
  2. Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
  3. To order invites, the following line and press ENTER: sfc/scannow (Yes there is a space after sfc)

  This analysis may take some time to complete. When the analysis is complete, test to see if the problem you are experiencing is resolved. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• When you try to open some sites Web my computer crashes and I get a message "a problem caused this program blocking interact with windows.

  Hello

  From time to time, I'm having a problem with internet access - when, finally, access is allowed and trying to open some websides my computer crashes and I get a message "a problem caused this program blocking interact with windows ' why?
  I'm not technically capable, but I did I tried different ways-nothing doesn't. I want to talk about Windows 7 Edition home premium.
  At the same time, there is no problem on my laptop which runs under Win XP and with the same internet provider! Any suggestion will be appreciated

  Original title: problems with Win7 and MozillaFirefox

  Hi Ulica,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing an Internet problem on the Windows 7 operating system.

  It would be great if you can answer these questions to help you further.

  1. is the question confined with Mozilla Firefox?

  2 are you able to access the same Web site using Internet Explorer?

  3. have you made changes on the computer before this problem?

  4 are you facing this problem while accessing the secure Web site?

  Problem with Internet Explorer, I would suggest trying the following methods and check.

  Method 1:

  I suggest you add this particular website as a trusted site and check.

  To add a Web site to a security zone: http://windows.microsoft.com/en-US/windows7/Security-zones-adding-or-removing-websites

  Method 2:

  I suggest you to see the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444

  Why can't I view some websites? http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-view-some-websites

  Note: There are rather than Internet Explorer 9 as well.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3:

  Internet Explorer not responding, stops working, or restarts: http://support.microsoft.com/gp/PC_IE_EnvManualID

  Note: If the question is limited only with Mozilla Firefox, I suggest you to post the same question in the Mozilla Firefox's Support Forums.

  http://support.Mozilla.org/en-us/questions

  Hope that the information provided is useful.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

  I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY.  ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE.  THE OPERATING SYSTEM IS WINDOWS 7.

  Mahamoud,
  Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
  
  Here is the solution I found to this problem:
  I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
  Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
  Replacement of the restored cartridge the printer functionality.
  That's the good news.
  Now the bad news: for HP.
  The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
  All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
  Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?

  (I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
  I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.

• get the message "unknown problem" going to Express update on Win Xp Sp3

  Win XP SP3 on this computer. Have even on another computer that works to get updates.  Problem will express the update or custom and get the message 'the site has encountered an unknown problem then pours me. Reasons has looked up in the FAQ, but none apply here.

  Rebooted computer and no change.

  Hi Mark,

  It seems that you need help to solve the problem of Windows updates. Please respond to the suite, which will help us to guide them in the right direction.

  1. which antivirus app do you use?

  2. What is the exact error message or error code?

  3 service pack 3 is installed on the computer that has a Windows Update issue?

  4. don't you make changes to the computer before this problem?

  You can try the Windows updates following troubleshooting methods to resolve the problem.

  Method 1:

  Reset the windows update components, restart calculate and check the status of the issue.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  Method 2:

  See the methods in the following link.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services.

  http://support.Microsoft.com/kb/906602

  You can also refer to:

  Refer to suggestions of "TaurArian replied on 9 July 2012."

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-problem-the-website-has-encountered/ec4ebc51-D089-4199-AD89-da50b8fd24dd

  Hope his helps.

• Pavilion g6-2241sa: remove message after problem solved

  In 'updates & tune-up' in my "HP Support Assistant" I see that an important message is available. This is 'create your system recovery '. This has been done.  How can I remove this message?

  Similarly, in "security potentiaal risk" I see in 'security system' that the 'virus protection' and 'protection against spyware and unwanted applications' are disabled. In fact, I think they are now on.  How to remove these warnings when the issues have been resolved?

  Thank you very much for your help.

  I agree I'd be concerned.  I used Norton which came with my new laptop, front of Sophos.

  I spent hours chatting with a technician in Microsoft over the weekend, who did all the things that I did and got the same result.

  Finally telling me I need to pay about $150 for further progress.  Maybe I'll wait for Windows 10.

  I also tolds previously, after a lot of testing by a Microsoft technical, that to operate the player Media also would cost the same amount.

  The computer is running and I'll leave it alone for now.

  During the holidays, I thought I would try to solve my problems and learn in depth on my computer, but it might be better to concentrate on my work, do not get perfection in computer management.

  So thank you very much, and for now, I'll consider the matter closed.

• Receive the error on the logging message indicating "problem accessing your user profile.

  I get an error message from the log indicating that there 'a problem accessing your user profile '. About a week or two ago I called Microsoft and Security Support technician run my laptop in safe mode to remove a virus preventing me access to the internet. This problem has been resolved. I have not used my laptop again since then until today.

  See if this helps:

  ·

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Error message: a problem with your wireless network card

  Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

  Your wireless card has stopped working properly.

  There is a network adapter that allows your computer to connect to a wireless network.

  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Try to create the new account. Message: Server problems! Since 2 days. Who can help?

  Bought the new printer (Photosmart C410b) HP with ePrint option.

  Try to create a new account in eprintcenter.com to save my printer

  to use ePrint. Get a similar message for 2 days:

  "Sorry, we have server problems. We noticed the problem and will come up with a solution.

  I use the German Web site. Is there really a problem since 2 days or is there a any error on my part?

  Who can help?

  Paschahelen

  Problem solved! Found the solution by checking German blogs with the same question.

  System doesn´t accept "Umlaute" (Aug), which are common in European languages.

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• SPA112 voice message indicator problem

  Hello

  I'm a newbee in voip, so I hope that my description of this problem makes no sense.

  When there is a voicemail my dect phone displays an icon. So far so good. But after that I listen to and delete voice messages and create another voicemail, the icon shows no more. It's a do time to the event. After that I reload the SPA112 it works again, but only for once more.

  Everything else works fine.

  Because the SPA112 is behind a NAT, I put the nat keep alive and mapping nat on Yes. The nat keep alive message and destination is by default $notify and $proxy.

  In the SIP settings I put keep nat alive at 15.

  Firmware: 1.3.3 (015)

  There are other parameters to be defined?

  Kind regards

  Jos

  Glad to hear that, although I have no idea how the switch caused the original problem.

  Mark the thread as answered, please. It will help others to find solutions.

  Concerning

  Dan