Messed up after 4.0 upgrade failure & leprechauns applications with constraint of PK err

Similar Questions

• What 3115cn error code 117-363 average after a firmware upgrade failure?

  Hello

  I just got a replacement 3115cn after the former we failed in the warranty. I noticed that the firmware was old so just tried to update using the USB port and the printer is now saying to call assistance with error code 117-363. No power glitches or a bad power / data cables etc. He copied through the fine then just failed to complete startup after reboot.

  The only relevant fact that I can think is that the MPC had the latest firmware above as it has been transplanted across from the old, but the base firmware was older than the protocols supported in the CPC. That's why I tried to upgrade in the first place, I had lost a bunch of new features only have the old version of the installed base.

  I'll be the appellant first thing, but I wanted to ask if anyone knew in advance. (It would be a great help if each error code was listed on the web site of Dell, so I could get myself.)

  Kind regards

  Paul

  Message edited by paul_a_hill on 02/25/2008 17:39
  
  

• Permission denied on 3560 after than IOS upgrade

  Hi all

  I just upgraded a CAT3560-48TS IOS 12.2 (37) SE1 (ipservicesk9) at 12.2 (46) SE (ipservicesk9). Everything seems fine until I tried logging with my account GANYMEDE: I get an authorization failure. Connect with a local priv15 account works fine. After removing the following statements:

  AAA authorization exec default local auth-server group

  0 default auth-server group AAA authorization commands no

  orders of 1 AAA authorization auth-server group default no

  orders of 15 AAA authorization auth-server group default no

  everything works fine again.

  Also, I have improved other 3560 switches to 12.2 (46) SE with a picture of ipbase. These switches work fine with exactly the same IOS AAA configuration. Any thoughts on this one?

  See you soon,.

  Vincent

  Run these commands,

  no single-radius-server host connection

  radius-server host

  Kind regards

  Prem

  Please rate if this can help!

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  * Original Title: windows update

  When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  If anyone has any ideas on how it can be fixed please tell me

  Adam

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• BlackBerry Z10 problems after the software upgrade

  After the software upgrade on my z10 I not receive notification for my text, whatsup and other notifications in my hub. Pls help

  I would try to reset your Hub first.

  Open the Hub and from the upper right corner, with the fingers sliding down to the center of the screen five times.

  You will see quick white screen, then a black screen with the text that the hub is set to zero.

  If after a day which not resolves your notifications, remove the twitter account of your settings > accounts, restart the BlackBerry, and add the new account.

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• Uninstall XP after Windows 7 upgraded

  I installed Windows 7 Pro (upgrade) in dual boot with Windows XP (of course XP was required to install the upgrade anyway). Now, can I remove the XP partition (remove XP from the start with Easy BCD screen) to regain disk space?

  I know that if I ever need to reinstall Windows 7, I have to install my XP first.  In fact, I use True Image, so I guess I can make an image of the disk with W7 after the withdrawal of the XP and just use it if I have to start over.

  7 uses a "100 mg boot partition" and is accessible through the bcdedit utility. " You will want to remove the 'store' for the old installation

  Start on a DVD, "repair my computer" link opens the WinRE recovery menu. Command prompt:

  type: bcdedit and finding the right {GUID} of the 'old' install.

  following type: bcdedit/delete {long number}

  Your ability to 'push' the partition will depend on where the old partition is the disk, with regard to the partition of 7.

  I suspect that you would have to "crush" the xp with installation of second 7, remove the 7 installation first, remove the partition of 7 first installation and develop.

  You will probably need the option 'phone' to activate again.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can not select Windows 8.1 upgrade and other applications after update system

  I just refreshed my laptop Windows 8.1 after that that he returned to Windows 8... I opened the store and I can't select Windows 8.1 upgrade and other applications. What can solve this problem?

  Hey Kevin,

  If you bought your laptop with Windows 8, and she had a recovery partition, it would reset to Windows 8 when you want to run a system to refresh. This also applies if you have performed the update system using a disk installation or recovery of Windows 8. You mentioned that you are now unable to update Select 8.1 of Windows update, the Windows store.

  The Windows 8.1 update is not listed? Or you can not face problems with the update 8.1 for Windows from the Windows store?

  If you are facing the issue later, what happens when you click on the update of Windows 8.1 in Windows store? An error message appears?

  You also mentioned that you can not store of Windows other apps? What happens when you try to install?

  If you are unable to find the Windows 8.1 update in the Windows store, try the steps suggested in this article and checking:

  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  If you are unable to install the update Windows 8.1 displayed in store Windows, then try these steps and check:

  First of all, make sure that you have installed all the Windows updates available, including 2871389 KB and KB 2917499.

  Method 1:

  Run the Windows update troubleshooting utility which can automatically detect and fix most of the incorrect settings that could cause problems with the download of updates. See the following steps:

  1. Press the Windows key + F to bring up the Search bar charms.
  2. Type of Troubleshooting and press enter; Click the tab settings , under the search box.
  3. Click on the tile to find and fix the problems and then click on the button show all the left pane.
  4. Click the Windows update troubleshooting tool and run it.

  Method 2:

  If the problem persists, disable any third-party antivirus software that you may have installed temporarily and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  If the problem persists, start your computer in a clean boot state, and then try to install Windows 8.1. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

• After the recent upgrade Indesign creashes at startup. Error related to FontManager

  CTC 2015 last rev.

  S.O. Windows

  After mid June upgraded Indesign crashes at startup.

  Windows reports:

  Nome dell' application che ha generato error: InDesign.exe, version: 11.4.0.90, time stamp: 0x574c8600

  Nome del modulo che ha generato error: MANAGER of FONTS. RPLN, version: 11.4.0.90, time stamp: 0x574c88c4

  Exception code: 0xc0000005

  Compensate for the error 0x000000000006e64d

  ID processo che ha generato error: 0x15b4

  Ora di d dell' application che ha generato error: 0x01d1cc575009eecd

  Percorso dell' application che ha generato error: C:\Program Files\Adobe\Adobe InDesign 2015\InDesign.exe CC

  Percorso del modulo che ha generato error: C:\Program Files\Adobe\Adobe InDesign 2015\Required\FONT CC MANAGER. RPLN

  Segnalazione ID: 908d0d08-384a-11e6-9da9-386077ce4453

  This has happened on 2 different PCs, a resolved after reinstalling SW, the other problem woth yet.

  Hi all

  We are aware of the problem where InDesign crashes on launch while working with library files stored on a network location.

  We are working on resolving the issue and for the moment, please try the solution that we have identified.

  To work around the problem, please follow the steps below:

  Clear the Cache InDesign either by renaming the Cache folder or deleting it altogether. (It is best to rename the folder)

  The location of the cache folder: -.

  Windows XP: C:\Documents and Settings\Settings\Application Data\Adobe\InDesign\------\Caches\

  Windows 7 or 10: C:\Users\\AppData\Local\Adobe\InDesign\-\Caches\

  Macintosh: Drive hard/users/InDesign/Library/Caches/Adobe///.

  In addition, if your workflow requires you to work with the (different) library placed on the network, please make sure you close the library panel before leaving InDesign.

  Concerning

  Afonso

  (InDesign engineering team)

• I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for?

  I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for on my new drive?

  Install the application of cc on your new hard drive desktop, https://creative.adobe.com/products/creative-cloud and use it to install your programs of cc.

  [moved from the download, installation, commissioning creative cloud download &install]

• I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Y at - it something I can do.

  I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Is that what I can do to get rid of the message. The message reads "a problem has been experienced while trying to send information on the internet.

  Hi philh76405255,

  I'm sorry for the inconvenience caused.

  Please refer to the following solution: -.

  (1) find the file acrobat.exe on your computer. Right-click on the program and click "troubleshoot compatibility". Set the compatibility of the operating system installed on your computer.

  (2) if it asks you to register several times, please refer to this doc. KB: easier to register several times. Acrobat 8 | Windows

  That might solve your problem.

  In case if you have still any question, please let us know. We will be more than happy to help you.

  Kind regards

  Nicos