Metadata load failed

Similar Questions

• Windows Update Standalone Installer: error 0x80073afc the resource loader failed to find MUI file. Windows 7 64 bit

  I have a desktop PC running Windows 7 Professional 64-bit.  There is an update which is unable to complete, causing the PC to undo changes to before the update.  It usually takes an extreme amount of time, and of course, I've always updates installed.  I tried to use the Microsoft Fixit tool, which came back with error 0 x 80070057.  I saw in a community forum that I could try the tool of microsoft SURT, but after the long scan he came back with the following error:

  Windows Update Standalone install

  Setup has encountered an error: 0x80073afc

  The resource loader failed to find MUI file.

  Please help.

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because of corrupted Windows Update files and components.

  I suggest you to reset the Windows update components and check if that helps.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• The execution of work load failed

  Hi experts BI Apps,

  I made a plan to load on the supply of the Oracle and analytics spend, load failed at the SDE_ORAR1212_ADAPTOR_SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS session

  ODI-1519: series step "start load Plan.

  (InternalID:2278500) ' failed, because the child step "Global Variable Refresh.

  (InternalID:2279500) "is a mistake.

  ODI-1519: series step "Refresh Global Variable (InternalID:2279500).

  has failed, because the step child ' Source extracted phase (InternalID:2282500) ' is

  by mistake.

  ODI-1519: step series ' Source extracted phase (InternalID:2282500) ' failed

  because the child step "1 general (InternalID:2283500)" is in error.

  ODI-1519: series step '1 general (InternalID:2283500)' failed, because

  step child "2 General SDE (InternalID:2326500)" is in error.

  ODI-1519: series step '2 General SDE (InternalID:2326500)' failed

  because no children "Parallel (InternalID:2412500)" is in error.

  ODI-1518: parallel step 'Parallel (InternalID:2412500)' failed. 1 child

  steps in error, which is more than the maximum number of permits

  errors (0) defined for parallel step.  Has no measures of the child: 3 SDE

  General MEASURE unit (InternalID:2432500)

  ODI-1519: series step '3 General SDE UOM (InternalID:2432500)' failed

  because the step of the 'Load Target Table (InternalID:2435500)' child is in error.

  ODI-1519: series step 'Load Table of target (InternalID:2435500)' failed

  because the step 'EBS_12_1_2 - 3 (InternalID:2436500) DSN' child is in

  error.

  ODI-1519: series step 'EBS_12_1_2 - DSN 3 (InternalID:2436500)' failed

  because the stage of the child "UOM_DIM (InternalID:2437500)" is in error.

  ODI-1519: series step 'UOM_DIM (InternalID:2437500)' failed, because

  stage of the child 'SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS '.

  (InternalID:2438500) "is a mistake.

  ODI-1217: Session

  SDE_ORAR1212_ADAPTOR_SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS (667500)

  fails with return code 1031.

  ODI-1226: step run

  SDE_ORA_UOMConversionGeneral_InterClass.W_UOM_CONVERSION_GS falls down after 1

  attempt (s).

  ODI-1240: Flow Run

  SDE_ORA_UOMConversionGeneral_InterClass.W_UOM_CONVERSION_GS fails while

  running a load operation. This flow of charge table target

  W_UOM_CONVERSION_GS.

  ODI-1227: SrcSet0 (load) task fails on the source of ORACLE connection

  ON_EBS1212.

  Caused by: java.sql.SQLSyntaxErrorException: ORA-01031: insufficient

  privileges

  I will be grateful someone can give some clues about this.

  Thank you.

  you don't have enough privileges for the user you are using to run the load. Check with the team of DB if the user you are using has obtained the privileges of right or not

• EPMA planning App - contour utility load fails

  I use version 11.1.2.3.

  I am loading new members, IE, metadata.

  First, I exported the dimensions of accounts using the utility. I then imported. 13 records of 13 files import successfully. I then added the Member of "Cash", that was inserted in line 7:

  PI_Accounts, Parent, Alias: default, valid for the Consolidations, storage of data, calculation of re encoding, Description, formula, UDA, Smart List, Type of data, Type of hierarchy, account Type, time, balance the value of Skip, Type Exchange rate, use 445, reports, the Plan Source Type, on the gaps Plan Type (PoiznIvy), aggregation (PoiznIvy)

  P & L, PI_Accounts, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Net Income, P & L, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Balance sheet, PI_Accounts, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Total assets, balance sheet, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Current assets, Total assets, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Cash, active, fake money, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Assets, Total assets, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Total liabilities & Equity shareholder, balance sheet, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Liabilities, liabilities Total & Equity shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Short-term liabilities, obligations, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Liabilities long-term, passive, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Equity shareholder, Total liabilities and capital shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Common shares, the shares of the shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  Retained earnings, capital shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

  The java error I get is: "Registered"Cash"Member Fetch failed." Up to 13/14 load of documents and the new 1 record is rejected.

  "Cash" he already has part of the application to make it load? That is why the utility seems pretty useless with respect to the loading of the new metadata. I already checked that there are no special characters in the name of the Member 'Cash '. There is no empty space at the end of the line. So why would I get this error?

  SH! will wrote:

  This utility works well for classical planning applications...

  EPMA to load the metadata of the tables of the interface.

  See you soon!

  SH! going

  Do not use the tables of the interface you can load flat files with EPMA, while it is true the outlineload utility is classic of planning applications.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Reviews of loading fails with Oracle DB but DB SQL

  Hello
  
  When I tried to use the newspaper to charge, the registration procedure was pass.
  After I clicked on the message button, an error message showed as follows:
  ==================================================
  Error: Failed to import files.
  Details: Invalid procedure call or argument File=C:\Hyperion\FDM\t01\Inbox\Journal.xls
  StackTrace:
  upsMPLDMw.clsMPLoaderClass.fMultiImportExcel (colLS [colLoadSet &])
  Hyperion.FDM.Pages.MultiLoad.ImportButton_Click (sender As [Object], e [EventArgs])
  ==================================================
  
  However, I tried the same sheet excel template file on an other Soft FDM which
  repository backend, sql Server 2005, was different from the previous one, the
  validation process is OK.
  I also found this journal ' multi-Load Model: Import "as follows:
  ==================================================
  News of the event: Bulk Import failure on the record!
  Error code: 5
  E/s Source: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\tWfdadmi14356153002314.tmp
  ==================================================
  
  The original FDM 9.3.1 app was based on the oracle 10.2.0.4 repository.
  So I wonder what there should be a few bugs when the FDM generates oracle import in the log file.
  I can't find any bug report or attached to this subject on the website of oracle patch support.
  
  Did someone meet this similar problem?
  Or what configuration setting should I set?
  Any advice would be appreciated.
  Thank you ~.
  
  Tony

  Hello

  Try changing the Type of load of places to SQL Insert
  Metadata > locations > select the locations > load Type > SQL Insert

  I encounter the same problem yesterday with Oracle DB

  Mac

• favicon loading fails

  Hello

  I develop a Web site and wish to add a favicon. so far no problem. The favicon does well in Opera, IE, Chrome, and Safari
  Well load the other favicons from different sites. I had this problem in the past and after a while, hours - days, the favicon will appear later. But then, I would like to make changes and the whole process starts again

  However I fail to get Firefox to load. Is this a known issue? Is there a solution?

  http://www.angeliquedon.nl
  I can see favicon in Firefox. Try to reload this page while you are viewing using F5. Or clear the cache.

  Generally, it is best to have the image of favicon.ico in the root directory, rather than having this image in a folder, such as the folder/photos / where you got it. Many web browsers search here and will be displayed, even without using a Meta tag.

• The download starts and gets to about 50 MB before the zone State says down load failed after refresh

  Hello

  I just had to update my laptop Azus Windows 8.  I reinstall all my programs.  All my financial records are Open Office, so I need to reinstall the program.  The download starts and gets to about 50 MB before the zone State says down load has failed.  This happens no matter if I choose run or save.  I lowered my security settings for IE but still not completely download.  I downloaded Open Office earlier this year with no problems.  It must be something that I am missing.  Please help I need to do my job.  Thank you

  Do you have any error messages at all when you try to download?

  What utility Antivirus you have installed? Have you tried to disable it temporarily and and see if they work?

  Have you tried to save the download to a different location on the hard drive such as the desktop?

  Have you tried using another user account?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  Press the Windows key + X

  Click prompt (Admin)

  At the command prompt, type the following command, press ENTER.

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Press the Windows key + R, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to download again

  You can try to download free Office instead which can OO.org Open files.

  http://www.LibreOffice.org/download/

• 11.1.2.4 planning metadata load errors RemoteException occurred in the server thread

  Hello

  I am trying to load the metadata using ODI 11.1.1.7 in Hyperion Planning 11.1.2.4. He wrong on the saying

  Could not load the dimension member, error message is: RemoteException occurred in the thread of the server; nested exception is:

  java.rmi.UnmarshalException: not recognized hash method: method not supported by the remote object.

  
  

  Source - file
  

  
  

  Please let me know if there is any difficulty in this.

  
  

  Thank you

  Sravan
  

  Hello

  I use a classic planning App. need to verify the fix mentioned by Shiva. Will keep you posted

  Thank you

  Sravan

• HFM drill region load fails

  In my current application whenever I load given to HFM drill region to load now fails. The data is loaded successfully, but no region of drilling is responsible. He has worked in the past I have entered into the table _ERPI AppNameregion. Error logs is also useful as always (see below)

  -----------------------------------------------------------------------------

  fLoadDRFile @ 2014-10-27-11: 24:26 *.

  -----------------------------------------------------------------------------

  System.Runtime.InteropServices.COMException (0 x 80040237): <? XML version = "1.0"? >

  < C'estr > < Ref > {B9F8FE9E-878B-4A85-AF3C-31160C928085} < / Ref > < AppName > COMMA4DIM < / AppName > < user / > < DBUpdate > 2 < / DBUpdate > < CSEC > < Num >-2147220937 < / Num > < Type > 1 < / Type > < DTime > 27/10/2014 11:24:26 < / DTime > < Svr > GBLWHFM02DV < / Svr > < file > CHsvDataLoad.cpp < / file > < line > 7213 < / line > < worm > 11.1.2.3.501.4628 < /. Worm > < / CSEC > < / C'estr >

  at HSVDATALib.IHsvData.LoadDrillableRegions (String bstrRegionsFilename, String bstrLogFileName, Int32 lLoadMode, Boolean & pvbErrors, Boolean & pvbWarnings)

  at erpiHFMAdapter.clsFMAdapter.fLoadDRFile (String strFileName)

  Problem with the path of the root application folder, it should be changed to use the UNC format

• DAC load failed.

  Hello

  Ours is still BI 10 g with DAC 7.9.6. We have a plan to run on demand, which retrieves data from source files to load the tables middle with informatica and eventually final target.  Holidays he did no business, so NO input file is sent... so plan execution is failed and caused other tasks scheduled after that on.  Can anyone suggest any possible solution to make everything run smoothly.  Import of empty files is not an option by the customer.

  Thank you

  Fri

  Two ways to handle this; Try to go to the order which would check the file, if the file doesn't exist do not then try to create a file with content 0 for all columns.

  Another way is to add the subject of decision etc.

• SQL Loader failed to load the same source sometimes data file

  I meet different types of data, loading errors when you try to load data. What makes it really annoying, is that I'm not able to identify the real culprit since the success of load depends on the amount of lines in the source data file but not its content. I use dataset Toad export feature to create delimited data set. When I decided to take the first 50 lines then succeeds data to load into the target table. When I decide to take the first 150 lines then the data to load into the target table fails indicating that:

  Record 13: Rejected - Error on table ISIKUD, column SYNLAPSI.
  ORA-01722: invalid number

  I can see .bad file that the same line has been loaded successfully when the data file that contains 50 rows was used. The content has no column for this particular row is NULL (no chain).
  I suspect that the toad generates faulty delimited text file when taking 150 lines. File data for reasons of confidentiality, I can't show. What can I do? How can we all further investigate this problem? Size of the array that must be loaded by SQL Loader is almost 600 MB. I use Windows XP.
  
  Published by: totalnewby on June 30, 2012 10:17

  I do not believe that customer sqlloader 11g allows you to load a 10g database. You can run sqlldr on the server of database 10g itself? PL also post the rest I asked information

  HTH
  Srini

• Planning metadata, loading problem

  Hello.
  
  I use this syntax to make loading metadata:
  
  OutlineLoad A:sample12 /U:admin / /I:D:\1\custom.csv /D:custom /L:D:\1\custom.log /X:D:\1\custom_ex.exc m
  
  When I load the metadata I get this problem.even I gave the space between 'Type' and '(PL). Please notify.
  Thanks in advance
  Journal and Exceptions:
  
  [Mar 22 May 08:14:12 IST 2012] Unrecognized column header value 'Plan Type (PL)'.
  [Mar 22 May 08:14:12 IST 2012] Impossible to get analytical information and/or perform a data load: values of unrecognized column header, refer to previous messages. (Note: column header values are case sensitive.)
  [Mar 22 May 08:14:12 IST 2012] Planning of vector data store loaded with exceptions processes: records not all input have been read errors (or empty input file). 0 records were read 0 records were treated, 0 were loaded successfully, 0 is rejected.
  
  
  [Mar 22 May 08:14:12 IST 2012] Input file located and opened successfully "D:\1\custom.csv".
  [Mar 22 May 08:14:12 IST 2012] Record header fields: Parent, custom, Alias: by default, aggregation (PL), data storage, Plan Type (PL)
  [Mar 22 May 08:14:12 IST 2012] Find and use "custom" size for loading the data in the application "sample12".
  [Mar 22 May 08:14:12 IST 2012] Impossible to get analytical information and/or perform a data load: values of unrecognized column header, refer to previous messages. (Note: column header values are case sensitive.)
  [Mar 22 May 08:14:12 IST 2012] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.
  [Mar 22 May 08:14:12 IST 2012] Planning of vector data store loaded with exceptions processes: records not all input have been read errors (or empty input file). 0 records were read 0 records were treated, 0 were loaded successfully, 0 is rejected.

  Hello

  I see that you load the metadata for a custom dimension. Your custom dimension is valid for 'Plan type (PL) '?

  Thank you
  Sourabh

• Metadata download failed

  When I try and run VMware update manager download update tasks scheduled, I get a "download metadata failed. I searched the articles, but the suggestions it has failed. I run vc update 2.5 4 and my hosts are on 3xi update 4. If anyone has seen this before?

  It can me multiple reason for this failure.

  To start, please check that your server is able to talk of the internet. Please check the proxy settings in the Update Manager. If you can make a proxy connection test. That could give you an answer. In addition, if you can post the files lof of/var/log/esxupdate that will help us solve your problem.

  Thank you

  Please price points if you think that this response is helpful.

• Metadata load twice

  Hey all

  I have a very simple setup to load a video, as well as the reference with netstream and NetConnection instance and so on.

  I join a customer the netstream to get the metadata with an onMetaData function.

  It works, but when the file is loaded I get the metadata not not once but twice. Is this normal? It is still two times?

  What bothers me really, it's that when I trace the duration of the returned metadataobject property, it gives me

  6.8034467120181406

  6.76

  ... Two different values?

  I tried several videos all with the same result, though most return both equal values. All the videos I tested were compressed using Adobe Media Encoder.

  Any info on this will be highly appreciated.

  Thank you

  Jakob Wagner

  Hi Jakob,

  I tried with your code. The problem is with the video file you compressed. When I played an flv file in my machine, it worked fine. In my view, the problem is with the video file. You can check with any other file that you are not compressed. And please let me know.

  Kind regards

  Sreelash

• OLIVIER 7.9.5 'Financial analytics' full load fails

  Hi all
  
  We are implementing instance OBIA7.9.5 Oracle 11.5.10 Vision.
  
  Components installation succeeded.
  We followed the respective Configuration steps for the Analytics module and set up the latter.
  
  When we start full charge for financial analytics,
  321 tasks, 215 was properly executed, 2 tasks failed and remaining were stopped
  
  below were the failed task
  Load in Position Dimension-> create Index W_POSITION_D_U1 INDEX
  TASK_GROUP_Extract_EmployeeDimension-> create Index W_EMPLOYEE_DS_U1 INDEX
  
  We received the error log below, on the creation of Index.
  
  ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found
  
  EXCEPTION CLASS: java.sql.SQLException
  
  oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
  oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
  oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
  oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
  oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:210)
  oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:961)
  oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1190)
  oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1657)
  oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1626)
  com.siebel.etl.database.DBUtils.executeUpdate(DBUtils.java:266)
  com.siebel.etl.database.WeakDBUtils.executeUpdate(WeakDBUtils.java:357)
  com.siebel.analytics.etl.etltask.SQLTask.doExecute(SQLTask.java:122)
  com.siebel.analytics.etl.etltask.CreateIndexTask.doExecute(CreateIndexTask.java:90)
  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:271)
  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:200)
  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:149)
  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:430)
  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:269)
  java.util.concurrent.FutureTask.run(FutureTask.java:123)
  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:650)
  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:675)
  java.lang.Thread.run(Thread.java:595)
  459 SEVERE kills Nov 10 20:40:50 GMT + 05:30 2009 failure detected during execution of CREATE INDEX: W_POSITION_D:W_POSITION_D_U1.
  Error code: 12801.
  Error message: runtime error: CREATE UNIQUE INDEX
  W_POSITION_D_U1
  WE
  W_POSITION_D
  (
  INTEGRATION_ID Asc
  DATASOURCE_NUM_ID Asc
  EFFECTIVE_FROM_DT ASC
  )
  NOLOGGING PARALLEL
  with error java.sql.SQLException: ORA-12801: error reported in the parallel query P000 Server
  ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found
  .
  
  everything by analyzing the error code above in the oracle forum, got a clue at the bottom of the link
  ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found
  
  even after having made the changes mentioned in the link above and restart the ETL even once, we get the same error message.
  
  Let us know how to solve this
  
  Thank you
  Saran

  If you right click on the task (or taskgroup) who is a failure in the dac and select 'Détails', you can see a list of the indexes that are supposed to have created and to check on those who fail.

  In addition, if you just want to finish the execution plan to look at where you are now find the clues failed and set them to the full status and re-queue implementation plan.

  I hope this helps!

  Austin