DAC load failed.
Hello
Ours is still BI 10 g with DAC 7.9.6. We have a plan to run on demand, which retrieves data from source files to load the tables middle with informatica and eventually final target. Holidays he did no business, so NO input file is sent... so plan execution is failed and caused other tasks scheduled after that on. Can anyone suggest any possible solution to make everything run smoothly. Import of empty files is not an option by the customer.
Thank you
Fri
Two ways to handle this; Try to go to the order which would check the file, if the file doesn't exist do not then try to create a file with content 0 for all columns.
Another way is to add the subject of decision etc.
Tags: Business Intelligence
Similar Questions
-
I have a desktop PC running Windows 7 Professional 64-bit. There is an update which is unable to complete, causing the PC to undo changes to before the update. It usually takes an extreme amount of time, and of course, I've always updates installed. I tried to use the Microsoft Fixit tool, which came back with error 0 x 80070057. I saw in a community forum that I could try the tool of microsoft SURT, but after the long scan he came back with the following error:
Windows Update Standalone install
Setup has encountered an error: 0x80073afc
The resource loader failed to find MUI file.
Please help.
Hello
Thanks for posting your question on the Microsoft community.
Thank you for details on the question and your efforts to resolve.
This problem can occur because of corrupted Windows Update files and components.
I suggest you to reset the Windows update components and check if that helps.
Refer to this article:
How to reset the Windows Update components?
https://support.Microsoft.com/en-us/KB/971058Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
The execution of work load failed
Hi experts BI Apps,
I made a plan to load on the supply of the Oracle and analytics spend, load failed at the SDE_ORAR1212_ADAPTOR_SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS session
ODI-1519: series step "start load Plan.
(InternalID:2278500) ' failed, because the child step "Global Variable Refresh.
(InternalID:2279500) "is a mistake.
ODI-1519: series step "Refresh Global Variable (InternalID:2279500).
has failed, because the step child ' Source extracted phase (InternalID:2282500) ' is
by mistake.
ODI-1519: step series ' Source extracted phase (InternalID:2282500) ' failed
because the child step "1 general (InternalID:2283500)" is in error.
ODI-1519: series step '1 general (InternalID:2283500)' failed, because
step child "2 General SDE (InternalID:2326500)" is in error.
ODI-1519: series step '2 General SDE (InternalID:2326500)' failed
because no children "Parallel (InternalID:2412500)" is in error.
ODI-1518: parallel step 'Parallel (InternalID:2412500)' failed. 1 child
steps in error, which is more than the maximum number of permits
errors (0) defined for parallel step. Has no measures of the child: 3 SDE
General MEASURE unit (InternalID:2432500)
ODI-1519: series step '3 General SDE UOM (InternalID:2432500)' failed
because the step of the 'Load Target Table (InternalID:2435500)' child is in error.
ODI-1519: series step 'Load Table of target (InternalID:2435500)' failed
because the step 'EBS_12_1_2 - 3 (InternalID:2436500) DSN' child is in
error.
ODI-1519: series step 'EBS_12_1_2 - DSN 3 (InternalID:2436500)' failed
because the stage of the child "UOM_DIM (InternalID:2437500)" is in error.
ODI-1519: series step 'UOM_DIM (InternalID:2437500)' failed, because
stage of the child 'SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS '.
(InternalID:2438500) "is a mistake.
ODI-1217: Session
SDE_ORAR1212_ADAPTOR_SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS (667500)
fails with return code 1031.
ODI-1226: step run
SDE_ORA_UOMConversionGeneral_InterClass.W_UOM_CONVERSION_GS falls down after 1
attempt (s).
ODI-1240: Flow Run
SDE_ORA_UOMConversionGeneral_InterClass.W_UOM_CONVERSION_GS fails while
running a load operation. This flow of charge table target
W_UOM_CONVERSION_GS.
ODI-1227: SrcSet0 (load) task fails on the source of ORACLE connection
ON_EBS1212.
Caused by: java.sql.SQLSyntaxErrorException: ORA-01031: insufficient
privileges
I will be grateful someone can give some clues about this.
Thank you.
you don't have enough privileges for the user you are using to run the load. Check with the team of DB if the user you are using has obtained the privileges of right or not
-
DAC: task failed during the ETL for financial applications
I'm looking for my first ETL on OLIVIER 7.9.6.4
I use Oracle EBS 12.1.1 as source system.
the ETL full 314 tasks successfully, but it fails at the task named:
'SDE_ORA_GL_AR_REV_LinkageInformation_Extract '.
DAC error log:
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called Wed Sep 18 09:46:41 2013
Connected to the Service of integration: [infor_int].
File: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]
Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]
Success of the source lines: [0]
Source has no lines: [0]
Target lines of success: [0]
Target lines failed: [0]
Number of errors in transformation: [0]
First error code [4035]
First error message: [[error SQL RR_4035
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATI]
Task run status: [failure]
Integration service: [infor_int]
The integration of Service process: [infor_int]
Grid integration Service: [infor_int]
----------------------------
Name of node [node01_AMAZON-9C628AAE]
Fragment of preparation
Partition: #1 [Partition]
Instance of transformation: [SQ_XLA_AE_LINES]
Transformation: [SQ_XLA_AE_LINES]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last [16004] error code, message [ERROR: prepare failed.: []]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_CO]
Departure time: [Sat Oct 18 09:46:13 2013]
End time: [Sat Oct 18 09:46:13 2013]
Partition: #1 [Partition]
Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]
Transformation: [W_GL_LINKAGE_INFORMATION_GS]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last error code [0], message [no errors].
Departure time: [Sat Oct 18 09:46:14 2013]
End time: [Sat Oct 18 09:46:14 2013]
Disconnection of Service integration
Completed at Wed Sep 18 09:46:41 2013
-----------------------------------------------------------------------------------------------------
Informatica session log files:
DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].
DIRECTOR > VAR_27028 use override the value [ORA_R1211] for the session parameter: [$DBConnection_OLTP].
DIRECTOR > VAR_27028 use override the value [.] SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log] for the session parameter: [$PMSessionLogFile].
DIRECTOR > VAR_27028 use override the [26] value for parameter mapping: [$DATASOURCE_NUM_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_TYPE].
DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].
DIRECTOR > override VAR_27028 use value [01/01/1970] parameter mapping: [$INITIAL_EXTRACT_DATE].
DIRECTOR > override VAR_27028 use value [01/01/1990] parameter mapping: [$LAST_EXTRACT_DATE].
DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [$LEDGER_ID_LIST].
DIRECTOR > VAR_27028 use override the value ["NONE"] parameter mapping: [$LEDGER_TYPE_LIST].
DIRECTOR > session initialization of TM_6014 [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] at [Sat Oct 18 09:46:13 2013].
DIRECTOR > name of the repository TM_6683: [infor_rep]
DIRECTOR > TM_6684 server name: [infor_int]
DIRECTOR > TM_6686 folder: [SDE_ORAR1211_Adaptor]
DIRECTOR > Workflow TM_6685: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] running Instance name: Id series []: [2130]
DIRECTOR > mapping TM_6101 name: SDE_ORA_GL_AR_REV_LinkageInformation_Extract [version 1].
DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled
DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]
DIRECTOR > TM_6827 [C:\Informatica\server\infa_shared\Storage] will be used as the storage of session directory [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full].
DIRECTOR > cache CMN_1805 recovery is removed when running in normal mode.
DIRECTOR > CMN_1802 Session recovery cache initialization is complete.
DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property
DIRECTOR > configuration using [OraDateToTimestamp, Yes] TM_6708 property
DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property
DIRECTOR > TM_6708 using the configuration property [SiebelUnicodeDB, [APPS] @[54.225.65.108:1521:VIS] [DWH_REP2]@[AMAZON-9C628AAE:1521:obiaDW1]]
DIRECTOR > TM_6703 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] is headed by [node01_AMAZON-9C628AAE], version [9.1.0 HotFix2] 32-bit integration Service, build [0903].
MANAGER > PETL_24058 Running score of the Group [1].
MANAGER > initialization of engine PETL_24000 of parallel Pipeline.
MANAGER > PETL_24001 parallel Pipeline engine running.
MANAGER > session initialization PETL_24003 running.
MAPPING > CMN_1569 Server Mode: [ASCII]
MAPPING > code page of the server CMN_1570: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING > TM_6151 the session to the sort order is [binary].
MAPPING > treatment of low accuracy using TM_6156.
MAPPING > retry TM_6180 blocking logic will not apply.
MAPPING > TM_6187 Session focused on the target validation interval is [10000].
MAPPING > TM_6307 DTM error log disabled.
MAPPING > TE_7022 TShmWriter: initialized
MAPPING > Transformation TE_7004 Parse WARNING [IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || > > > > DISTRIBUTION_ID < < < <.
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | (> > > > DISTRIBUTION_ID < < < <).
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || (> > > > DISTRIBUTION_ID < < < <)
]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [JE_HEADER_ID |] '~' || JE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > JE_HEADER_ID < < < < | '~' || JE_LINE_NUM < < PM Parse WARNING > > [JE_LINE_NUM]: operand is converted to a string
... JE_HEADER_ID | '~' || [> > > > JE_LINE_NUM < < < <]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [AE_HEADER_ID |] '~' || AE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > AE_HEADER_ID < < < < | '~' || AE_LINE_NUM < < PM Parse WARNING > > [AE_LINE_NUM]: operand is converted to a string
... AE_HEADER_ID | '~' || [> > > > AE_LINE_NUM < < < <]; transformation continues...
MAPPING > TM_6007 DTM initialized successfully for the session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].
MANAGER > PETL_24004 from the tasks before the session. : (My Sep 18 09:46:13 2013)
MANAGER > task PETL_24027 before the session completed successfully. : (My Sep 18 09:46:13 2013)
DIRECTOR > PETL_24006 from data movement.
MAPPING > Total TM_6660 Buffer Pool size is 12582912 bytes and block size is 128000 bytes.
READER_1_1_1 > DBG_21438 Reader: Source is [54.225.65.108:1521/VIS], [APPS] users
READER_1_1_1 > BLKR_16003 initialization completed successfully.
WRITER_1_ * _1 > WRT_8146 author: target is the database [AMAZON - 9C628AAE:1521 / obiaDW1], [DWH_REP2], loose [on] mode users
WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.
WRITER_1_ * _1 > target WRT_8124 W_GL_LINKAGE_INFORMATION_GS of Table: SQL INSERT statement:
INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,GL_ACCOUNT_ID,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GL_LINKAGE_INFORMATION_GS]
WRITER_1_ * _1 > WRT_8003 writer initialization complete.
READER_1_1_1 > BLKR_16007 player run began.
READER_1_1_1 > RR_4029 SQ [SQ_XLA_AE_LINES] User Instance specified SQL query [SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
[AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ("NO")]
READER_1_1_1 > RR_4049 SQL query sent to the database: (Wed Sep 18 09:46:13 2013)
WRITER_1_ * _1 > WRT_8005 writer run began.
WRITER_1_ * _1 > WRT_8158
START SUPPORT SESSION *.
Startup load time: Fri Sep 18 09:46:13 2013
Target table:
W_GL_LINKAGE_INFORMATION_GS
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > RR_4035 SQL Error]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
Fatal error Oracle
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
[Error fatal Oracle].
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > BLKR_16004 ERROR: prepare failed.
WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.
WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load
WRITER_1_ * _1 > time full load WRT_8035: Sun Sep 18 09:46:13 2013
SUMMARY OF THE LOAD
============
WRT_8036 target: W_GL_LINKAGE_INFORMATION_GS (Instance name: [W_GL_LINKAGE_INFORMATION_GS])
WRT_8044 responsible for this target data no.
WRITER_1_ * _1 > WRT_8043 * END LOAD SESSION *.
MANAGER > PETL_24031
PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.
Thread [READER_1_1_1] created [stage play] point score [SQ_XLA_AE_LINES] is complete. Running time total was enough for significant statistics.
[TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_XLA_AE_LINES]. Running time total was enough for significant statistics.
Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GL_LINKAGE_INFORMATION_GS]. Running time total was enough for significant statistics.
MANAGER > PETL_24005 from tasks after the session. : (My Sep 18 09:46:14 2013)
MANAGER > task of PETL_24029 after the session completed successfully. : (My Sep 18 09:46:14 2013)
MAPPING > TM_6018 the session completed with errors of processing row [0].
MANAGER > parallel PETL_24002 engine Pipeline completed.
DIRECTOR > Session PETL_24013 run duly filled with failure.
DIRECTOR > TM_6022
PLENARY OF THE LOAD
================================================
DIRECTOR > TM_6252 Source load summary.
DIRECTOR > Table CMN_1740: [SQ_XLA_AE_LINES] (name of the Instance: [SQ_XLA_AE_LINES])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6253 Target Load summary.
DIRECTOR > Table CMN_1740: [W_GL_LINKAGE_INFORMATION_GS] (name of the Instance: [W_GL_LINKAGE_INFORMATION_GS])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6023
===================================================
DIRECTOR > TM_6020 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] to [Sat Oct 18 09:46:14 2013].
------------------------------------------------------------------------------------------------------------------------------------------------------------------
* I made a few requests in my source (Vision) database, table "XLA_EVENTS" exists, column "UPG_BATCH_ID" exists also
* I added 'XLA_EVENTS' to the FROM clause and he ran in SQL Developer
* in the SELECT clause, I see a column named 'AEHEADER. EVENT_TYPE_CODE ".but there is no table named 'AEHEADER' in the FROM clause
so I added it manually, it is without doubt makes reference to 'XLA_AE_HEADERS '.
The final request looks like this:
SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
XLA_AE_HEADERS AEHEADER
XLA_EVENTS
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
* When I run this query, it takes a lot of run time without return no result (it took 4 hours to cancel it, I got the last time)
my questions are:
-What is the problem with this query?-How can I change the query in the workflow?
could someone please help?
Check if the session is reusable or non-reusable. If his re-usable, so you may need to modify the sql query in the window of the tasks
-
DAC performance fails at the fist stage
Hello
While running full load CAD iam getting the following error, the first step only it fails
05-02-2013 22:51:21.335 acquisition of resources
05-02-2013 acquired 22:51:21.336 resources
05-02-2013 22:51:21.337 INFORMATICA TASK: SILOS: SIL_InsertRowInRunTable:1: (Source: COMPLETE target: FULL) began.
FAULT INFO: Error executing: INFORMATICA TASK: SILOS: SIL_InsertRowInRunTable:1: (Source: COMPLETE target: FULL)
Message:
Fatal error
Application to start the workflow: 'SIL_InsertRowInRunTable with the name of the instance SIL_InsertRowInRunTable' terminated with error code 17
Error message: the settings file does not exist.
Opportunity to order: pmcmd startworkflow - sv is-u Administrator Pei * f - SILOS - paramfile Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SILOS Domain_123 d. SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
Workflow message:
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], LINUX 32-bit
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called to Tue Feb 05 22:51:26 2013
Connected to the Service of integration: [is].
From [SIL_InsertRowInRunTable] workflow
ERROR: Workflow [SILOS: SIL_InsertRowInRunTable [version 1]]: parameter [Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SILOS file. SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt] not found. See the journal of Service integration for more information.
Disconnection of Service integration
Completed at Tue Feb 05 22:51:27 2013
=====================================
ERROR OUTPUT
=====================================
EXCEPTION CLASS: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of attempts: 1).Make sure you have these files at the location \bifoundation\dac\Informatica\parameters
parameterfileDW.txt
parameterfileOLTP.txtYou can get these files from BIApps files-> dwrep
Also DAC-> Setup-> system properties of the DAC-> InformaticaParameterFileLocation by default
Check if help and appreciate also if you update your other posts by scoring when help or with your solution.
Published by: Srini VIEREN on February 6, 2013 12:01 AM
-
DAC SIL_InsertRowInRunTable' failed error PLZ HELP!
I installed version 10.1.3 OBIEE and OBI APPS version 7.9.6, I have configured DAC Repository Schema in oracle 11g R2.
I use the 8.6.0 informatica power Center.
I followed the guide following Oracle® Guide de Configuration of Applications of Business Intelligence for Informatica PowerCenter users
Version 7.9.6.1
When I run the first load I get the error "'SIL_InsertRowInRunTable' failed."
the log file is the following
*INFO : LM_36435 [Mon Oct 25 11:43:59 2010] : (3224|4340) Starting execution of workflow [SIL_InsertRowInRunTable] in folder [SILOS] last saved by user [Administrator]. INFO : LM_44206 [Mon Oct 25 11:43:59 2010] : (3224|4340) Workflow SIL_InsertRowInRunTable started with run id [132], run instance name [], run type [Concurrent Run Disabled]. INFO : LM_44195 [Mon Oct 25 11:43:59 2010] : (3224|4340) Workflow [SIL_InsertRowInRunTable] service level [SLPriority:5,SLDispatchWaitTime:1800]. INFO : VAR_27085 [Mon Oct 25 11:43:59 2010] : (3224|4340) Parameter file [C:\Informatica1\PowerCenter8.6.0\server\infa_shared\Temp\SIL_InsertRowInRunTable_a04340] is opened for [workflow [SIL_InsertRowInRunTable]]. INFO : LM_44253 : (3224|4340) Workflow started. Clients will be notified INFO : LM_36330 [Mon Oct 25 11:43:59 2010] : (3224|4340) Start task instance [Start]: Execution started. INFO : LM_36318 [Mon Oct 25 11:43:59 2010] : (3224|4340) Start task instance [Start]: Execution succeeded. INFO : LM_36505 : (3224|4340) Link [Start --> SIL_InsertRowInRunTable]: empty expression string, evaluated to TRUE. INFO : LM_36388 [Mon Oct 25 11:43:59 2010] : (3224|4340) Session task instance [SIL_InsertRowInRunTable] is waiting to be started. INFO : LM_36682 [Mon Oct 25 11:43:59 2010] : (3224|4292) Session task instance [SIL_InsertRowInRunTable]: started a process with pid [4996] on node [node01_home-9e3bae43d0]. INFO : LM_36330 [Mon Oct 25 11:43:59 2010] : (3224|4292) Session task instance [SIL_InsertRowInRunTable]: Execution started. INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6793 Fetching initialization properties from the Integration Service. : (Mon Oct 25 11:43:59 2010)] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [DISP_20305 The [Preparer] DTM with process id [4996] is running on node [node01_home-9e3bae43d0]. : (Mon Oct 25 11:43:59 2010)] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [PETL_24036 Beginning the prepare phase for the session.] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6721 Started [Connect to Repository].] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6722 Finished [Connect to Repository]. It took [0.171875] seconds.] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6794 Connected to repository [obiee] in domain [Domain_home-9e3bae43d0] as user [Administrator] in security domain [Native].] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6721 Started [Fetch Session from Repository].] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6722 Finished [Fetch Session from Repository]. It took [0.046875] seconds.] INFO : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].] *ERROR : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [CMN_1761 Timestamp Event: [Mon Oct 25 11:43:59 2010]]* *ERROR : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [VAR_27026 Error: Missing initial value for session parameter:[$PMSessionLogFile].]* *ERROR : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [CMN_1761 Timestamp Event: [Mon Oct 25 11:43:59 2010]]* *ERROR : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6270 Error: Variable parameter expansion error.]* *ERROR : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [CMN_1761 Timestamp Event: [Mon Oct 25 11:43:59 2010]]* *ERROR : LM_36488 [Mon Oct 25 11:43:59 2010] : (3224|4304) Session task instance [SIL_InsertRowInRunTable] : [TM_6163 An error occurred initializing variables and parameters for the partition.]* *ERROR : LM_36320 [Mon Oct 25 11:44:01 2010] : (3224|4340) Session task instance [SIL_InsertRowInRunTable]: Execution failed.* *WARNING : LM_36331 : (3224|4340) Session task instance [SIL_InsertRowInRunTable] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SIL_InsertRowInRunTable] will be failed.* *ERROR : LM_36320 [Mon Oct 25 11:44:01 2010] : (3224|4340) Workflow [SIL_InsertRowInRunTable]: Execution failed.* *
The log above has the following error
[Lack of initial value for the session parameter: [$PMSessonLogFile].] *
can someone tell how I can configure this value.
The value of overrideMpltVarWithMapVar is also defined Yes in custom properties of the integratiin service.
Thank youHello
1. What Version of BI Apps do you use 7.9.5 and 7.9.6 (as you mentioned in your first post before). ?
2. to ensure that DAC version, Informatica Version you are using support your current Version of BI Apps and follow the steps accordingly.
3.Yes, previously up to BIApps 7.9.5, DAC gets automatically installed to: location of/OracleBI /, but BI Apps v 7.9.6 you must install V DAC 10.1.3.4... separately
4. make sure sure your use same login name used in DAC--> physical Data Sources and Informatica--> Workflow Manager--> connections / relationships.
5. Yes Informatica seems C:\Informatica1\PowerCenter8.6.0\server\infa_shared\SrcFiles for SrcFiles (.csv) and setting creates files in this location separately for each workflow if you have set the InformaticaParameterFileLocation value to the value of the $PMSourceFileDir
6. $PMSEssionLogFile is an integrated and user-defined Session setting. Find you it in any file generated parameter.
for example: $PMSessionLogFile = ORA_11_5_10_FLATFILE. DATAWAREHOUSE. SILOS. SIL_TimeOfDayDimension.log
7 al ' DAC you generate parameters before starting the execution Plan?
I guess that your settings files are not generated correctly. Check all your file parameter generated so far to see if the values are filled in correctly
My suggestion is please check again that the configuration of all the steps in the documentation according to your Version of BI applications before you run your load.
Hope this helps
-
OLIVIER 7.9.5 'Financial analytics' full load fails
Hi all
We are implementing instance OBIA7.9.5 Oracle 11.5.10 Vision.
Components installation succeeded.
We followed the respective Configuration steps for the Analytics module and set up the latter.
When we start full charge for financial analytics,
321 tasks, 215 was properly executed, 2 tasks failed and remaining were stopped
below were the failed task
Load in Position Dimension-> create Index W_POSITION_D_U1 INDEX
TASK_GROUP_Extract_EmployeeDimension-> create Index W_EMPLOYEE_DS_U1 INDEX
We received the error log below, on the creation of Index.
ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found
EXCEPTION CLASS: java.sql.SQLException
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:210)
oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:961)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1190)
oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1657)
oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1626)
com.siebel.etl.database.DBUtils.executeUpdate(DBUtils.java:266)
com.siebel.etl.database.WeakDBUtils.executeUpdate(WeakDBUtils.java:357)
com.siebel.analytics.etl.etltask.SQLTask.doExecute(SQLTask.java:122)
com.siebel.analytics.etl.etltask.CreateIndexTask.doExecute(CreateIndexTask.java:90)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:271)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:200)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:149)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:430)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:269)
java.util.concurrent.FutureTask.run(FutureTask.java:123)
java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:650)
java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:675)
java.lang.Thread.run(Thread.java:595)
459 SEVERE kills Nov 10 20:40:50 GMT + 05:30 2009 failure detected during execution of CREATE INDEX: W_POSITION_D:W_POSITION_D_U1.
Error code: 12801.
Error message: runtime error: CREATE UNIQUE INDEX
W_POSITION_D_U1
WE
W_POSITION_D
(
INTEGRATION_ID Asc
DATASOURCE_NUM_ID Asc
EFFECTIVE_FROM_DT ASC
)
NOLOGGING PARALLEL
with error java.sql.SQLException: ORA-12801: error reported in the parallel query P000 Server
ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found
.
everything by analyzing the error code above in the oracle forum, got a clue at the bottom of the link
ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found
even after having made the changes mentioned in the link above and restart the ETL even once, we get the same error message.
Let us know how to solve this
Thank you
SaranIf you right click on the task (or taskgroup) who is a failure in the dac and select 'Détails', you can see a list of the indexes that are supposed to have created and to check on those who fail.
In addition, if you just want to finish the execution plan to look at where you are now find the clues failed and set them to the full status and re-queue implementation plan.
I hope this helps!
Austin
-
Hello
I develop a Web site and wish to add a favicon. so far no problem. The favicon does well in Opera, IE, Chrome, and Safari
Well load the other favicons from different sites. I had this problem in the past and after a while, hours - days, the favicon will appear later. But then, I would like to make changes and the whole process starts againHowever I fail to get Firefox to load. Is this a known issue? Is there a solution?
http://www.angeliquedon.nl
I can see favicon in Firefox. Try to reload this page while you are viewing using F5. Or clear the cache.Generally, it is best to have the image of favicon.ico in the root directory, rather than having this image in a folder, such as the folder/photos / where you got it. Many web browsers search here and will be displayed, even without using a Meta tag.
-
Hello
I just had to update my laptop Azus Windows 8. I reinstall all my programs. All my financial records are Open Office, so I need to reinstall the program. The download starts and gets to about 50 MB before the zone State says down load has failed. This happens no matter if I choose run or save. I lowered my security settings for IE but still not completely download. I downloaded Open Office earlier this year with no problems. It must be something that I am missing. Please help I need to do my job. Thank you
Do you have any error messages at all when you try to download?
What utility Antivirus you have installed? Have you tried to disable it temporarily and and see if they work?
Have you tried to save the download to a different location on the hard drive such as the desktop?
Have you tried using another user account?
What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.
Press the Windows key + X
Click prompt (Admin)
At the command prompt, type the following command, press ENTER.
ipconfig/release
then
ipconfig/renew
then
ipconfig/flushdns
leave the command prompt
Press the Windows key + R, type: folder
Press enter
Delete the contents of the temp folder
Restart the computer and try to download again.
If the problem persists, try resetting your router if you are connected to one.
Turn off the router, unplug it, wait 10 minutes
Plug it in again, power up once again
Reconnect the Ethernet cable
Try to download again
You can try to download free Office instead which can OO.org Open files.
-
In my current application whenever I load given to HFM drill region to load now fails. The data is loaded successfully, but no region of drilling is responsible. He has worked in the past I have entered into the table _ERPI AppNameregion. Error logs is also useful as always (see below)
-----------------------------------------------------------------------------
fLoadDRFile @ 2014-10-27-11: 24:26 *.
-----------------------------------------------------------------------------
System.Runtime.InteropServices.COMException (0 x 80040237): <? XML version = "1.0"? >
< C'estr > < Ref > {B9F8FE9E-878B-4A85-AF3C-31160C928085} < / Ref > < AppName > COMMA4DIM < / AppName > < user / > < DBUpdate > 2 < / DBUpdate > < CSEC > < Num >-2147220937 < / Num > < Type > 1 < / Type > < DTime > 27/10/2014 11:24:26 < / DTime > < Svr > GBLWHFM02DV < / Svr > < file > CHsvDataLoad.cpp < / file > < line > 7213 < / line > < worm > 11.1.2.3.501.4628 < /. Worm > < / CSEC > < / C'estr >
at HSVDATALib.IHsvData.LoadDrillableRegions (String bstrRegionsFilename, String bstrLogFileName, Int32 lLoadMode, Boolean & pvbErrors, Boolean & pvbWarnings)
at erpiHFMAdapter.clsFMAdapter.fLoadDRFile (String strFileName)
Problem with the path of the root application folder, it should be changed to use the UNC format
-
EPMA planning App - contour utility load fails
I use version 11.1.2.3.
I am loading new members, IE, metadata.
First, I exported the dimensions of accounts using the utility. I then imported. 13 records of 13 files import successfully. I then added the Member of "Cash", that was inserted in line 7:
PI_Accounts, Parent, Alias: default, valid for the Consolidations, storage of data, calculation of re encoding, Description, formula, UDA, Smart List, Type of data, Type of hierarchy, account Type, time, balance the value of Skip, Type Exchange rate, use 445, reports, the Plan Source Type, on the gaps Plan Type (PoiznIvy), aggregation (PoiznIvy)
P & L, PI_Accounts, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Net Income, P & L, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Balance sheet, PI_Accounts, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Total assets, balance sheet, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Current assets, Total assets, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Cash, active, fake money, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Assets, Total assets, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Total liabilities & Equity shareholder, balance sheet, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Liabilities, liabilities Total & Equity shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Short-term liabilities, obligations, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Liabilities long-term, passive, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Equity shareholder, Total liabilities and capital shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Common shares, the shares of the shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
Retained earnings, capital shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.
The java error I get is: "Registered"Cash"Member Fetch failed." Up to 13/14 load of documents and the new 1 record is rejected.
"Cash" he already has part of the application to make it load? That is why the utility seems pretty useless with respect to the loading of the new metadata. I already checked that there are no special characters in the name of the Member 'Cash '. There is no empty space at the end of the line. So why would I get this error?
SH! will wrote:
This utility works well for classical planning applications...
EPMA to load the metadata of the tables of the interface.
See you soon!
SH! going
Do not use the tables of the interface you can load flat files with EPMA, while it is true the outlineload utility is classic of planning applications.
See you soon
John
-
SQL Loader failed to load the same source sometimes data file
I meet different types of data, loading errors when you try to load data. What makes it really annoying, is that I'm not able to identify the real culprit since the success of load depends on the amount of lines in the source data file but not its content. I use dataset Toad export feature to create delimited data set. When I decided to take the first 50 lines then succeeds data to load into the target table. When I decide to take the first 150 lines then the data to load into the target table fails indicating that:
I can see .bad file that the same line has been loaded successfully when the data file that contains 50 rows was used. The content has no column for this particular row is NULL (no chain).Record 13: Rejected - Error on table ISIKUD, column SYNLAPSI. ORA-01722: invalid number
I suspect that the toad generates faulty delimited text file when taking 150 lines. File data for reasons of confidentiality, I can't show. What can I do? How can we all further investigate this problem? Size of the array that must be loaded by SQL Loader is almost 600 MB. I use Windows XP.
Published by: totalnewby on June 30, 2012 10:17I do not believe that customer sqlloader 11g allows you to load a 10g database. You can run sqlldr on the server of database 10g itself? PL also post the rest I asked information
HTH
Srini -
Reviews of loading fails with Oracle DB but DB SQL
Hello
When I tried to use the newspaper to charge, the registration procedure was pass.
After I clicked on the message button, an error message showed as follows:
==================================================
Error: Failed to import files.
Details: Invalid procedure call or argument File=C:\Hyperion\FDM\t01\Inbox\Journal.xls
StackTrace:
upsMPLDMw.clsMPLoaderClass.fMultiImportExcel (colLS [colLoadSet &])
Hyperion.FDM.Pages.MultiLoad.ImportButton_Click (sender As [Object], e [EventArgs])
==================================================
However, I tried the same sheet excel template file on an other Soft FDM which
repository backend, sql Server 2005, was different from the previous one, the
validation process is OK.
I also found this journal ' multi-Load Model: Import "as follows:
==================================================
News of the event: Bulk Import failure on the record!
Error code: 5
E/s Source: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\tWfdadmi14356153002314.tmp
==================================================
The original FDM 9.3.1 app was based on the oracle 10.2.0.4 repository.
So I wonder what there should be a few bugs when the FDM generates oracle import in the log file.
I can't find any bug report or attached to this subject on the website of oracle patch support.
Did someone meet this similar problem?
Or what configuration setting should I set?
Any advice would be appreciated.
Thank you ~.
TonyHello
Try changing the Type of load of places to SQL Insert
Metadata > locations > select the locations > load Type > SQL InsertI encounter the same problem yesterday with Oracle DB
Mac
-
Windows error recovery, "load failed with error 1009 (STHIVE #0).
Hello world
This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is
"Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)
"If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »
There are two options it saying
-Launch Startup Repair tool
-Start Windows normally
When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends
When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.
What should I do now?
My laptop is "Compaq Presario V3500"
Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...
-
Hi all
I am load flat file in custom intermediate table using sql loader, but I'm betting that the error
Record 2720: Rejected - error on the table XXPLL_SALES_FCST_BGA_TMPL, column MKTG_ASP.
ORA-01722: invalid number
XXPLL_SALES_FCST_BGA_TMPL - Custom intermediate Table
MKTG_ASP - contains decimal values
I created this column as a number data type.
I've seen much after and it was proposed to use 'Decimal external' but it still does not work. All suggestions will be useful.
Thank you
Sharath Chander M
Hi Barbara Boehmer
Now, I changed in the file ctl under 'EXTERNAL DECIMAL Mktg_ASP DONE BY a SPACE' and now all data are allowed in / load. Is - this way?
I will also try as you say. Also if the data file has a line any, as a null value for this column will be it's causing any problem for the amendment that I have performed in ctl file?
Thank you
Sharath Chander M
Maybe you are looking for
-
Safari web content to 99% of the CPU
Sometimes, my Macbook Air start at full speed of heat fan just because I have Safari open. If I close the fan falls down. You have any idea why this is happening?
-
Hi just tried to download family safety on laptop. It keeps me tellin I need to restart the computer, what I've done. everything has been downloaded properly
-
What should I do here?
-
All-in-one HP Officejet 2620: how to digitize information and join the e-mail to send the
Need to know how to analyze the doctors note then attach to e-mail sent in response to a request to Office
-
How to resolvw the sick problem where in I am not able to copy and paste and create the new folder. I always go to the processes and kill him to tmake it happen.