MG5320 works very well on cable 2 but...

Similar Questions

• Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

  Hello

  I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
  Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
  But on Windows 2000, this no longer works.
  The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
  The Toshiba Wireless Client Manager provides the following information:
  Status:
  ------
  Connected to the network: SMC
  Connection: Excellent
  Access Point name:
  Channels: 2
  Encryption: on

  ----------- Warning ----------------
  Impossible to communicate with the AP.
  Please check the encryption and IRQ.

  Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

  I am running Windows 2000 SP4 with the latest updates.
  Could someone help?

  Thank you

  François

  Hello

  Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

  Good bye

• 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

  I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

  Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

  Am I missing something here?

  What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

  Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

  Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

  In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

  My $.02

• F4580 works very well from the laptop but when I try to print something from mobile internet is blurry?

  Have run the HP Diagnostic print comes very well, very good copy.  The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.

  Hello Ann,.

  Allow me to quickly gather information about the issue in order to guide you in the right direction.

  1. what version of Windows is installed on the computer?

  2. what web browser do you use to print from the internet?

  3A this works much earlier?

  4 have have there been recent changes made on the computer before the show?

  I suggest you to refer to the links and check if it helps.

  Problems printing from the Internet

  I can't print or preview before printing a Web page in Internet Explorer

  Printing webpages: frequently asked questions

  Please post back with the results and we will be happy to help you further.

• works very well on the shell, but not via cron

  Hello

  the ghettoVCB works pretty well on my vShpere 4.1 Standard Server run from console. My setup looks like this:

  vms2backup.conf: listed three VMs to backup

  I have a config file for each virtual machine. That looks like this:

  VM_BACKUP_VOLUME = / vmfs/volumes/VMBackup
  DISK_BACKUP_FORMAT = thin
  VM_BACKUP_ROTATION_COUNT = 3
  POWER_VM_DOWN_BEFORE_BACKUP = 0
  ENABLE_HARD_POWER_OFF = 0
  ITER_TO_WAIT_SHUTDOWN = 3
  POWER_DOWN_TIMEOUT = 5
  ENABLE_COMPRESSION = 0
  ADAPTER_FORMAT = ide
  VM_SNAPSHOT_MEMORY = 0
  VM_SNAPSHOT_QUIESCE = 0
  ENABLE_NON_PERSISTENT_NFS = 0
  UNMOUNT_NFS = 0
  NFS_SERVER = 172.30.0.195
  NFS_MOUNT = / nfsshare
  NFS_LOCAL_NAME = nfs_storage_backup
  NFS_VM_BACKUP_DIR = MyBackups
  SNAPSHOT_TIMEOUT = 15
  EMAIL_LOG = 1
  EMAIL_DEBUG = 1
  EMAIL_SERVER = mail.domain.com
  EMAIL_SERVER_PORT = 25
  [email protected]
  [email protected]

  The NFS part is not necessary.

  I start backing up shell like this: /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log

  When from the backup of shell as mentioned above, everything works fine. In the end, I get an autoresponder email.

  But now, when I call this script with the same syntax via crontab, only the first two servers when saved and the script stops until the number of rotation shall take effect from the second server. If the third server is not saved and no e-mail is created.

  I have no idea until the problem could be. The hard disk is not full.

  Any ideas?

  Regards Wolfgang

  You can proceed as follows, re - run the script via cron but in your crontab entry, have it configured as follows, where you hit an error that is not connected:

  /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log d debug - c /ghettoVCB > /ghettoVCB/ghettoDebug.txt

  It will redirect all the outputs generated during the race in /ghettoVCB/ghettoDebug.txt and see if there are errors.

• Works very well in the Simulator, but when it is installed through the Desktop Manager questions

  OK so as well Hello world and production apps work correctly on the Simulator... I had some advanced api like blackberry.identity but I removed it because he yelled at me for code signing... I removed the advanced permissions but usually always open... I can see the application in the list of downloads, but clicking nothing

  I tried with the sample application engines and the same thing... click on the application icon, but nothing happens...

  Once again any word on sim and no not use any "features" except the blackberry.ui (on production app)

  blackberry 9630 tour

  Thanks for your help!

  All the BlackBerry Widgets require the signature, even if you are not using a single line of JavaScript.

  The software BlackBerry Widget SDK generates the Java code required to create the widget.  The display of web content in a Java BrowserField, which requires a signature.  Therefore, all the widgets must be signed.

  Code signing keys are usually issued within 2 days of the order, but may take up to 10 business days.

• Installation of Windows 7 works very well in analog mode, but not DVI mode

  I tried to install Windows 7 with the DVI cable is connected and when I get to the first reboot the screen is black and the installation will stop.  When I use a cable analog VGA instead of DVI installation cable is completed.  Why would using VGA and DVI not working.  It seems that if you have the possibility to use a cable two should work even. Any ideas?

  It is probably a quirk of the type of graphics card you have, fortunately, some cards can work outside either port with standard VGA drivers, but some lower end cards will not output unless the appropriate drivers are installed. (Some lower end cards can also have doubles outings, but can use 1 at a time, not in dualview)

• just installed cloud print on my mobile. works very well with my 5510 but only print black and white.

  Anyone know why I can only print in black and white on my photosmart 5510 when you use cloudprint of

  My HTC desire hd. ?

  Hi brianmadmidge,

  Here's what you need to do to change the settings for printing for Google Cloud Print:

  1. Go to https://www.google.com/cloudprint/learn/ and click on "Try it now" (you may be prompted to sign in if so, sign, then click the link again.)
  2. A pop-up will appear with your list of printers.
  3. Select a printer.
  4. Click on options.  Grey_K will be black ink only, Grey_CMY will be high quality gray and color will be full color.

• One of my computers works very well to display my beneficiaries of my bank online and the other computer says that I don't have any beneficiary, worm 35 on both.

  Everything on my online banking Web site works fine except the display of my beneficiaries. It does not, he tells me that I don't have any beneficiary. This function works very well on my backup computer with 16, 32, and 35 versions.

  That's what my Bank said:
  There was some problems with the compatibility of Firefox to view online recipients. Please, try the following steps to clear the cache and delete cookies. If there is still a problem, start Firefox in Mode safe. While you are in safe mode, press the < Alt > or < F10 > to display the toolbar. Then select Tools > Options > advanced > general. Find and stop using hardware acceleration.

  Boot in safe mode to fix the problem, but it's a bit of a pain. A refreshment or a reset seems a little drastic and I would like to know what exactly is the problem before using the shotgun approach.

  Thank you

  Thanks for the replies. I have try to disable hardware acceleration, but probably no connect fees. My only add-on is edge of adblock and I disabled it for the site. The thing is, I don't want to disable either of these elements. I'll just start firefox in safe mode, if I need to access my beneficiaries. I was hoping that someone may know something that is bad in my profile that has carried over from previous versions or another kind of corruption. It seems strange that an entire site could work very well with hardware acceleration, but not to this one point.

• WRT160N V2: Wireless works very well, but cable slow and intermittent

  Get speed and very good wireless connection.  But when I connect the ethernet cable, the speed slows down, and half the time I get error message "unable to connect".  I bought this router in Oct 2009 and so don't know if it needs a firmware update.  Based on other posts, I went to IE - Tools - Internet Options - connections - network settings and décliqués the only thing that was clicked: automatically detect settings.  That does not make a difference.  Yesterday, after some advice on another site, I changed ports on the router and it worked very well for a while.  But today, no port doesn't really realize.

  Try upgrading/re-Flash the firmware on your router.

  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Sites Web open do not, but other applications internet like Skype, viber, messengers works very well

  Hi guys,.

  It comes to Nilesh, I really need help in this case.

  Since last week, its been observed on my Dell Inspiron 3521 to i5 with HDD 750, 4 GB of RAM (Service Tag # ), that in spite of the use of 10 Mbps ethernet speed cable, the site does not open unless I restart the computer each time but other applications such as Skype video calling, viber works very well, the torrent files are also downloaded great at high speed.

  What I've done so far-

  (1) the connection on the router - OK

  (2) RJ45 Ethernet connector was broken - fixed.

  (3) Firewall setting - ON (default)

  (4) I've restored the system as well.

  (5) Avast Anti-virus manually installed on my PC and its ON 24 / 7 and I also scanned my computer and not threats that will find there also.

  (6) my system is up to date, I have downloaded a few applications for the Dell software update on my 3521. So, it updates the new versions automatically and automatically restarts the computer.

  (7) I have tried to connect my laptop directly with the cable coming from the wall too, still the same problem.

  Despite all this, the only problem Im making ' is difficult, impossible to open the Web site. I can open the Web site but only when I restart my laptop and that too for only 10 or 15 or 20 or 30 minutes. After that, one more time of site question. I mean, the Web sites stop opening after 20-30 minutes.

  Some of my friends, colleagues suggest me to get the laptop formatted.

  So, my request here is, do I really format my C drive? If there no need other alternatives, please please please share. (but, before that, please read everything that I did on my 3521 far to avoid a repetition)

  If other than all of the above, and if I need to format my C drive, let me know the procedure of formatting PC which I think will be clean the PC and start from scratch. So far I got the backup of my C drive to the D drive.

  I would appreciate your help in this matter, as its so frustrating. I hope you understand my situation here.

  Thank you very much!

  Nilesh

  Hey you!

  You simply Rock buddy...

  What a most satisfying to your precise support of bar.

  I followed the steps you told me, and I was able to download successfully from chrome and mozilla firefox, as well as the software application anti malware free one that told you me... and did a quick scan by your suggestion. And, guess what, there were approximately 136 flaws that I deleted the system. (BDW, digital defects had a few registeies also, but not sure if I did it correct that I removed, could you explain me basically what it is, is it a virus or what and how is it that night my computer?) Just for my tech knowledge.)

  Now, my system works like a butter on a roll. You just need a raise!

  G $ thanks to you, Ricki.

  Nilesh

• I have the UI which downloads the file in file multiprt transfer in chuncks. It worked very well in a previous version of firefox, but now ajax calls gets abandoned?

  I have the UI which downloads the file in file multiprt transfer in chuncks (blob file). It worked very well in a previous version of firefox when we send chuncks 10 MB for each ajax calls. But now in the last version of firefox, its get rejected for 10Mo chuncks with every call, but allowing only 4 KB be sent for each call. You guys could help me. I also tried with the Application (/ octectstream). It also works very well in all browsers.

  Hi Sivasathy, support.mozilla.org is intended for management of the end user. If you have questions about web development please refer to the place to go for support the developers instead. Thank you for your understanding!

• I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

  I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

  Is not possible. You'll need to use the Apple TV remote to turn it off.