Microphone works do not, but playback sound is detected by the latter?

Similar Questions

• HP Pavilion DV6 3070TX - Microphone works on tape but not Skype

  Hi team,

  I did a bit of trawling through previous posts but have not found an answer that fits my scenario. This is a brand new laptop (HP dv6-3070TX) and the internal microphone works great on tape, however I can not be heard by others on Skype and the test recording easier on Skype is not read my voice. I hope it's a simple question, repairable and someone has an answer for me.

  See you soon.

  Sorry team. I'm a twit. There was an audio setting on Skype, which has been set at an external microphone - not internal. Changed and all is good.

• speakers and microphone works do not, said convenience store "device working properly.

  a couple of days ago my machine makes an auto update as usually and things seemed good, but shortly after, I noticed that I had no sound function or a microphone of my internal devices and making helmet is also non-functional. the first thing I did was restart, no luck. Then, I ran a convenience store and received the msg above. I noticed that while I had the audio device manager open that I do not have access to the 'configure', 'default' and 'properties' functions under the tabs of playback and recording. After a further review I thought that maybe I had a problem of compatibility of the driver with the recent update, but I'm not really sure of what has been updated. I also thought I might have a conflict of use with an application hogging things even though I have seen no unusual activity in the Task Manager. Despite this, I disabled the 'google ok' feature in chrome and restarted. This seemed to fix that I had the sound and the microphone back, but when I started this morning I had the same problem and since I don't re - not allow 'google ok' and it does not automatically start (I checked), which doesn't seem to have actually done something after all, or there are other problems that are still not resolved.

  in any case, I'm running worm Realtek HD Audio Driver 6.0.1.6937, I'm on a wired ethernet connection, I got no error msgs and I did not any changes in software.

  FYI, I found an announcement and related solution for what seemed to be a similar problem (see post titled "speakers and microphone doesn't work DO NOT, all the devices said to work" posted on 26/02/2013 15:00), but the pilot referenced was an IDT Audio driver not a Realtek, don't know whether or not the process is the same.

  so that is where I am. any help?

  Laptop HP 2000-2b24NR
  Product no.: C2M60UA #ABA
  OS: 8 64-bit Windows

  Hello

  I do not work for HP, but I see a definite advantage on the subject of what you are suggesting.

  Try to perform the following procedure.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  Realtek HD Audio Driver - Windows 8

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Then, download and reinstall the Chipset driver on the following link.

  Chipset Driver - Windows 8

  When done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click "Speakers/HP" (speakers or headphones) once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• UTL_MAIL works do not, but apex_mail... any ideas? (SMTP transient error: 421 Service not available)

  Start

  () UTL_MAIL. Send

  recipients = > ' [email protected] ',

                 sender       => ' [email protected] ',

  subject = > "this is an issue."

  message = > 'This is a message');

  end;

  ORA-29278: SMTP temporary error: 421 Service not available

  ORA-06512: at "SYS." UTL_MAIL", line 654

  ORA-06512: at "SYS." UTL_MAIL", line 671

  ORA-06512: at line 2

  Start

  apex_mail. Send

  (

        p_to       => ' [email protected] ',    

  p_from = > ' [email protected] ',  

  p_subj = > 'this is a topic. "

  p_body = > 'This is a message'

  );

  apex_mail.push_queue ();

  end;

  Works very well.

  (of course, I use the correct recipient/sender names).

  For what it's worth, I have a second server with the same ACL settings and utl_mail is working on that one, but I don't know what is different.

  Any help much appreciated.

  You will get an ORA-29278 if you smtp_out_server instance parameter is not assigned to a working SMTP service.

  --

  John Watson

  Oracle Certified Master s/n

• Creative library cloud doesn't work does not (and assistance section probably points to the wrong folder address?)

  Good, then... I am excited by the possibilities of CC.  I want to get stuck in.  But I'm a little frustrated by that.

  The CC library does not work.  Muse, my CC library panel is empty except for the error message "something went wrong initialization library creative cloud", with a link "more information."  FYI, I saved the (pigeon) web design adapted in Adobe Muse | Muse CC tutorials Adobe files to my CC library and can see them when I go straight TO (my CC staff) my property.  They are there. I can see them.  But they are not load into the Muse CC library folder.

  So, I followed the 'Further information' link in the Panel of the box CC library what , helpfully, opens to work around the problem step by step. Article of the workaround is easy to follow.

  In summary;

  I closed all applications Adobe (Muse) and rebooted.

  I deselected "Hide extensions of known file types", via the control/appearance Panel and customization. (Yes... IM in a Windows laptop... don't hate me)

  I then follow the " AppData\Roaming\Adobe\Creative Cloud Libraries\LIBS\ 'directions to search for crime' ".

  Settings.JSON 'file, in order to establish the number SERVICE_PORT.  But the .json file is not there.  In the file CreativeCloudLibraries there are 3 subfolders; LIBS, MUSE and PHXS.

  Here, it 's a settings.json file in the PHXS folder, and there is a file settings.json in the folder of the MUSE, too. It has a third file settings.json in the folder "adobe photoshop cc 2015.2/required/plug-ins/spaces" as well.  But nothing in the LIBS folder.  (I searched SERVICE_PORT in all 3 of the above, PHXS, MUSE and photoshop, but the SERVICES_PORT info is not there... only a port number of debugging for the photoshop .json file... I tried anyway... obviously he wasn't going to work, but I gave it a try!).

  I can only assume two things;

  either, 1) .json to the CC LIB file has not been loaded for some reason any during the download.

  or 2) since article workaround " Solution to the issue: Adobe Creative Cloud Library Panel does not load in office products " was written, the destination of the file was placed during updates and article is now obsolete.

  Does anyone know how I can get around this please?

  Thanks in advance

  UPDATE: CC library work;  If anyone gets this problem with your CC library, follow these instructions: Solution to the issue: Panel Adobe Creative Cloud libraries will load not office products

  Be warned, I had followed this (to the letter) several times absolutely without success for a whole day! Yet, today, did exactly what I did before... the CC library is now up & running.

  Go figure?  Everything I know and care about is that it works now.

  Good luck

• Satellite A200 - headphone and microphone works do not (Win XP)

  I have fully operational Windows XP with all works very well. However, today I tried to connect a microphone to the computer, the software noticed, muted the internal speakers, but it is there no sound in headphones whatever I do. I tried if the microphone is well only to find out I have the same problem - the software realtek notice me, I plugged a microphone, but does record no sound.

  I would be most grateful for any help.

  Are you sure you checked all necessary settings?

  I m not Satellite A200 owner but I have a similar Satellite A series and I installed the two OS (Vista & XP) on my HARD drive.

  Of my knowledge you should check the settings of the sound options & audio different microphone.
  In Control Panel, you will find the Sound & audio devices. Choose it!
  Then select the Audio tab.

  That could be sound recording of area that provides information on possible devices for sound recording.
  First of all, you should check if the Volume settings are defined at a higher level.
  Then check if a right device has been selected (in my case it s a Realtek HD audio input).

  Tab another voice (almost), you can test the record too much voice. This could be very useful to check if the microphone is working correctly
  Please do!

  Good bye

• USB Microphone (headset) do not pick up sound

  Hello.

  I am currently using a headset (wired) Gioteck EX - 05 USB. The drivers installed perfectly (to my knowledge), and my recording devices in my PC recognizes that a microphone is there. However, from this moment, he can only play her even though the helmet itself. The microphone just not my voice, and I know that it actually works, since I've used it before, and when I listen well "Listen to this device ' I hear a kind of static electricity, but nothing else.

  My PC works on Windows 7, and to my knowledge the on-board sound is "VIA HD Audio Deck", while the majority of the solutions I've seen about Realtek seem not to apply.

  Attempts to try to correct what I've tried so far are put in different USB slots and uninstalling the drivers and allowing them to reinstall.

  I just got a new helmet tomorrow because I think we can the drivers simply do not work on W7. However, if I can get this to work I will not need to buy a new helmet. On the other hand, maybe I need a wire to the top if this new headset does not work, as at the time it could be something on my end PC and not the headphones.

  Solved the problem. Problem was in the helmet itself. Got a new helmet and now it works.

• CD/DVD drive not working do not, but are there in my computer!

  To anyone who can help...

  I have a Dell Inspiron 1545 with vista, less than 9 or 10 months. Now, the problem I have is that the CD/DVD drive does not work it will opening and closing and makes two short sounds and what - not more. Before this happened I had installed Roxio and then I uninstalled it and since then him dosent drive works.
  And to answer most of your questions
   
  1... it appears in my computer
  2... it appears in Device Manager and that his work is
  3... I uninstalled it, rebooted and it reinstalled the drive itself
  4... I deleted the upper and lower and rebooted the laptop and still the same fillters.
  5... all drivers are up to date!
  6. I searched the web looking for answers, but none has the kind of problem I :(

  So, the only other thing that it would be maybe is just nackerd drive. but I hope not.

  Anyone have any ideas?

  Thank you.

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Try the above; If that doesn't work correct hardware Vista drivers not repost in the Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion Elite m9543uk: BDDVDRW GBC-H20L CD/DVD doesn't work does not, but is in the Device Manager

  BDDVDRW GBC-H20L CD/DVD does not work after update to Windows 10 Pro Windows 7 Pro this in Device Manager & this PC but when I double LK on this take a long time to load (it is called playing autoplay but does ' t), then it says Windows cannot access the specified device, path or file. You do not have the appropriate permissions to access the item (I am an administrator with full control).  When I RC on the reader a list of options come & I play the disk after a long wait. but it is very choppy can you please help. I also tested for all the bad guys, but I seem to be clean.

  Again thanks for the advice I will now roll back to Windows 7

• Wireless scan not working do not, but will print officejet 4500

  I have a Dell with Windows 8.1, HP officejet 4500 Wireless.  Work to find two days ago, but now my "HP Solutions Center 's" software does not see the scanner.  \

  The Solutions Center softwared (that comes with the printer controll scanning photos and documents) is back with a message: The HP Imaging device was not found.  Try the following steps that... None of them worked.

  See my PC to the printer, and I can print to the printer, but CAN'T SCAN.    Help me please.
  [email edited by Moderator]

  Hello @chuckg7kc , welcome to the forums

  I've read about the software problem that you encounter on your system Windows 8.1, as printing software does not work for you, and you see the error "the HP Imaging device cannot be found". I have some ideas in mind which may help you!

  Perform an uninstall of level 3:

  If the software has been downloaded and extracted to your system:

  1. press Windows key + R and type %temp% enforcement and press enter

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5. run the L3uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9. try a clean boot that turns off all startup programs. Disable all firewall and anti-virus too and try the installation again.

  10 download the drivers and full software features: here

  11. once the printer is installed, go back to the clean boot instructions to re-enable the startup programs.

  Good luck

• VPN users 5110 ASA - DNS works do not, but all pings ok

  So we have set up an ASA 5510 in no problem, users can VPN and an IPCONFIG/all confirms that the DNS server in Group Policy settings have been applied.

  Group Policy sets the DNS servers as 192.168.2.8 (internal), 8.8.8.8 (google).

  Public websites work well.

  Type nslookup opens Internet correct DNS server.

  but all requests for time-out.

  C:\Users\atr>nslookup

  Default server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  > w7farmm3

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  > w7farmm3.ourcompany

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  > w7farmm3.ourcompany.local

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  > google.com

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  Any ideas?

  If it works with tunnelall and not with the split tunneling then you need to enable split dns.

  Your group strategy should something like this:

  internal vpnpolicyx group policy

  attributes of the strategy of group vpnpolicyx

  Split-dns value yourcompany.local

  I hope this helps.

• Windows 8 keyboard works do not, but just for a specific profile (NOT a hardware problem)!

  Hey people this is the strangest question.   Device Surface RT of my wife had the keyboard AND the small button of windows on the prior to completely stop working.   The game mouse and left and right mouse keys still work.   Also, there is still a small noise when you press the keys, but nothing appears on the screen.   I tried to plug and reconnect the cover touch, tried to uninstall and reinstall the drivers, and then I put in place a whole new profile on the machine and the button keyboard and windows worked fine.    Then I connected to our desktop PC of Windows 8 with my wife and found that the keyboard does not work there either!   Maybe there is a setting or another that has been altered in its account of Microsoft and now the setting is homelessness... it's the strangest problem.   Has anyone ever heard talk about him?     I consider just ditching her account and setting it up with a new one but it has invested heavily in ongoing one since it is also his e-mail address and she had a bunch of applications.

  Thank you
  Mike

  None of these methods did the trick.   The real solution was to change a configuration setting in the center of the "ease of access".   I had a setting called "Turn on filter keys" turned on, as well as some detailed within this feature options.   It was probably the result of my daughter for 3 years getting there when I wasn't looking :-).    Given that I had roaming profile through devices settings, it affects all devices connected to this account.   After that I fixed it in the same place, the new setting propagated to the others and the problem was solved!   I hope that my pain on this is useful to someone else in the future who runs into this problem.

  In addition, I hope that Windows 8 product team numbers how 'error proof' this 'feature' which is configurable in the next update of product, since I can't imagine any scenario of "ease of use" could involve expanding the physical buttons on the keyboard and windows stop working while still making small noises as if they work.

• Character animation - lip sync doesn't work is not for me... When the audio button is lit, model puppet reacts to the speech but it only shows smiling them and surprised

  The video works, all moving very well, surprise and also smile. But when the audio is turned on, it never shows the other mouth, speaking clear English (and audio levels very well)...

  Have a look, it s working in fact :-) bumpy at times... comments may be noise - wasn't using headphones... maybe I got a switch or located make correctly in the user interface.  great work thank you!

• TouchSmart 610-1010t: subwoofer not working is not in playback mode

  I have an external box connected via the 3.5 mm jack on the back of my computer.  After the upgrade to Windows 10, he stopped working with all the reading (itunes, videos online, windows media).  It works, however, when I test the speaker in the interface of beats.  The integrated speakers still work perfectly. I uninstalled the driver IDT and reinstalled, still nothing.  All the drivers appear to be up-to-date.  Any ideas?

  Hello @Papakins,

  Thanks for the quick response!

  @Malygris1 is currently out of the office, so I'll take him.  Have you tried installing the driver IDT using compatibility mode Windows 10, as indicated in the previous post?  I understand that the external speakers work, when you use the interface of beats.  Have you tried to restore the BIOS?  You can use the following document can help you:

  HP Notebook PC - restore BIOS

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• On ASA 5510 VPN works do not but the work stations

  We have an ASA 8.2 (3) running and have two VPN site to site running on it.  The second VPN we just establish the other day, and of the SAA itself, it seems to work.  We are able to ping remote hosts from the ASA without problem.  However, on this second VPN all hosts on our local network cannot reach the remote party...  Trying to understand what could happen.  Applicable config below (please forgive the mistakes and formatting):

  interface Ethernet0/0

  nameif outside

  security-level 0

  address IP WAN. IP. ADDR 255.255.255.224

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.168.21.1 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  nameif intf2

  security-level 0

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  Shutdown

  nameif management

  security-level 100

  no ip address

  management only

  !

  access extensive list ip 192.168.21.0 outside_cryptomap allow 255.255.255.0 10.50.50.0 255.255.255.0

  Access-group acl_out in interface outside

  Crypto ipsec transform-set esp-3des esp-sha-hmac ATLAS-TS

  life crypto ipsec security association seconds 28800

  card crypto mymap 2 match address outside_cryptomap

  card crypto mymap 2 together peer PEER. WAN. IP. DEA

  card crypto mymap 2 game of transformation-ATLAS-TS

  map mymap 65535-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  ISAKMP crypto 10 nat-traversal

  tunnel-group of PEERS. WAN. IP. ADDR type ipsec-l2l

  tunnel-group of PEERS. WAN. IP. ADDR ipsec-attributes

  pre-shared key *.

  Hello

  Seems to me that his dynamic State PAT shot meant for Internet traffic

  Phase: 6

  Type: NAT

  Subtype:

  Result: ALLOW

  Config:

  NAT (inside) 1 0.0.0.0 0.0.0.0

  is the intellectual property inside everything outside of any

  dynamic translation of hen 1 (WAN. IP. ADDR.162 [Interface PAT])

  translate_hits = 6186208, untranslate_hits = 145616

  Additional information:

  Translation dynamic 192.168.21.100/0 to WAN. IP. ADDR.162/12936 using subnet mask 255.255.255.255

  So you might miss the NAT0 configuration for this connection

  Do the following

  Issue the command "Display running nat" and you should see a NAT0 configuration for the 'inside' interface. Something like that

  NAT (inside) - 0 access list

  Next, you will need to check the ACL configuration

  See the list of access running

  You can add local and remote network that need to communicate through that VPN L2L connection to this ACL

  So for examples sake lets assume that your ASAs directly related "inside" subnet needs to access the remote network, and then you would add

  ip 192.168.21.0 access list allow 255.255.255.0 10.50.50.0 255.255.255.0

  So use the above configuration format with good source and network of destination, as well as the correct name of the ACL and add the required ACL lines and then try to host LAN connections.

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary

  -Jouni