MicroSD - "Drive is not formatted" after taking on sansa express

Similar Questions

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• CD/DVD drive does not work after 8 Win instalation

  Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

  When I put the blank cd and try to open it, it gives me error when opening by saying:
  "windows could not complete the format".

  Who's a software or a hardware problem?

  waiting for help!

  This means that your CD/DVD drive no longer works and is not recognized by the system?

  If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

  + Why my CD/DVD drive does not work after upgrade to Windows 8? +
  http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

  You must uninstall the programs from Toshiba:
  TOSHIBA Recovery Media Creator
  TOSHIBA Disc Creator

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

  HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

  Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

• External hard drive (Seagate) not readable after the ejection using Thunderbolt cable

  Not sure where this question fits as this seems to be a Thunderbolt cable problem but here goes...

  I have 4 TB Seagate Backup Plus external drives for archiving with two drives - backup A and B backup - and two interfaces, a basis of love at first sight and a standard basis of USB3.

  Using the basis of love at first sight that I backed up to 1.5 TB of data on a Mac logged to A disk and ejected from backup format. When I reassembled A backup to verify the data Finder says the drive is not a recognizable car and I had to reformat. I thought that I must have crashed head or something like the disc was still running when I pulled it off the base of love at first sight. When I got tired to reformat the drive in disk utility only 500 GB of the 4TB were available for formatting, so I thought that I've certainly got to have damaged it.

  Then I saved my 1.5 TB of data to a second drive Seagate Backup Plus (backup B) but when I eject this drive (this time I waited to stop and pulled the power over the base before you remove the disk) and then lift the drive that the same error came in the Finder. Suspecting it was the Thunderbolt interface I swapped backup to the base of the USB3 B and all the data is there! I checked A backup and even if she had to be reformatted this time all the 4 TB of capacity was available.

  I also have a Rugged Lacie 2 TB drive with a Firewire interface and it seems to work just fine so maybe the Thunderbolt Apple cable or Seagate sight base. I don't have a second Thunderbolt cable to test with at the moment.

  As a secondary issue readers are not run down after eject either. The heads are parked, but readers continue so I have to pull the power and wait that it happen down before I can remove basic USB3 disks or love at first sight. This problem, even if it's embarrassing, I can live with. In the foreseeable future I'll use the basis of the USB3.

  Everyone knows about this problem before? It sounds really weird.

  I can only give you my opinion of WD boxes and I'm afraid that's not good. My experience with WD boxes have always been bad. My suggestion is to try another TB cable and see if that's it, if not then try to connect another device to your iMac Thunderbolt and test to see if it is the iMac, which I doubt it is. If this isn't the cable or the iMac, then you know that it's the condom. If the disks are recoverable from the speaker, remove them and get a TB of high-quality speaker. My vote goes to OWC (www.macworld.com) pregnant Thunderbolt.

• Memory of the computer on the Local C drive does not increase after deleting all the photos and the video.

  On my computer, the operating system is Windows Vista Home Premium. I am facing a problem, in which case, the amount of gigabytes, on the Local C drive.

  does not increase after remove/delete all the photos and video to my computer.

  I've done a disk cleanup.

  Any help will be greatly appreciated.

  Elliott R.

  Hello

  Check if the files that has been deleted and still resident in the trash, if so, empty the trash.

  http://Windows.Microsoft.com/en-us/Windows7/permanently-delete-files-from-the-Recycle-Bin

  Method 1;

  I suggest that you run the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Test the issue in a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• USB flash drive will not format

  Dane Elec 16 GB USB drive flah.

  When inserted, it tells me that it needs formatting. But I can not format, because somehow, it is write protected. However, there are not switch or any possibility of mechanics to remove the write protection.

  I tried unlocker, formatting to ntfs (with XP, Win7, and BACK), but nothing works.

  Any suggestions?

  Groet puts goede Rob

  Hello

  Have you tried to format your USB key, but instead to use NTFS you use FAT 32?

  Click on windows start orb
  type cmd and do a right click and select run as administrator
  type diskpart
  disc type list
  Select the drive that is your USB. For example, if your USB is no disc select 2 then type 2
  clean type
  type create partition primary
  Type format fs = fat32 quick
  Type exit

  Now see if it finally formatted your USB Flash drive

  Kind regards

  Andrew

  Always "vote as helpful" for those who helped and 'mark as answer"If the info helped you in a sort of way. Thank you, Andrew Young - MCTS Windows 7, configuration

• Dolby audio driver does not load after upgrade Windows 10

  Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)

  Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.

  Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.

• Primary drive 1 not found after reinstalling original software

  Original title: startup

  I reinstalled my original software on my computer and now when I turn on my computer, it says: primary drive 1 not found.  The attention!  Active mode OS install.  Available memory limited to 256 MB.  Strike F1 key to continue, F2 to run the Setup utility.  What can I do to solve my problem?

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/primary-hard-disk-drive-1-not-found/fa3e591f-daeb-47bf-8f6f-3238f9507b6a

  It will be useful.

• CD/DVD drive is not recognized after a partially uninstalled program

  Original title: I need help.  Desperately!

  I tried to remove some old software using the Control Panel, uninstall.  Uninstaller has partially and I got the "Error 1327.Invalid Drive: G:\. "When I reconnected it my drive hard Seagate he came as drive E:\ and my NERO account came as NERO (F).  The E:\ and F:\ use my optical drive names.

  I lost my CD and my readers of DVD-RW/CD-RW drive.  They are not recognized by my computer at all.  Now, my computer is useless, because I can't use readers for entry.

  When I tried the CMD, subst C:\ G: the answer came back no such aminal.  When I uninstalled my two optical drives and restarted my computer, it came back and said optical drive installation failed because the drivers were corrupt.  I can't install the new drivers because my optical drives do not exist.  Should I consider a sledge hammer or staple for repair, or?

  Hello
  You can try a system restore to a prior restore point you have been affected by the issue.
  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  To run the system restore, you can see the following link.
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  
  Hope this information is useful.

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• My HP 6500 AirPrint printer does not print after re plug AirPort Express

  After finding my Airport Express 802.11n flashing yellow I unplugged and then plugged back.  Green light came.  Then nothing would print to my HP

  Printer officejet 6500 has.  I said that it is connected. I have installed and reinstalled the printer, run diagnostics, turned off the firewall and it will still not print fron ipad iphone or computer Dell with Windows 10

  I have

  After finding my Airport Express 802.11n flashing yellow I unplugged and then plugged back.  Green light came.  Then nothing would print to my HP

  How your HP Officejet printer is connected to the terminal of the AirPort Express base station... by Ethernet, USB, or wireless? If you run the HP utility on your PC from Win10, can we find the printer? The 6500 is NOT an AirPrint-compatible printer. You should not be able to print from an iOS to this printer device.

• Audio driver does not work after reinstalling XP on Tecra M9

  Hello

  After much fighting, I gave up. It's imposible to get my sound card upward operation on my TECRA M9 PTM91E, after I decided to renounce a cleaning by formatting the drive completely. My procedure is as follows:

  1 WINDOWS XP SP2 installed
  2. downloaded all drivers on another pc. Downloads of official pilot of toshiba site: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES
  3. install drivers in the correct order, following the instructions: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftedd-files2%2f0%2finstall-20070918164527.zip
  4 no luck when you try to install the sound card driver (download page specifies a built-in realtek) first try the suite version: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2f81.27.174.52%2ftedd-files2%2f0%2fsound-20071002102843.zip
  5 messed around trying the older drivers of other laptop TECRA M Series, luck is.
  6. has decided to map its just might not be a Realtek and tried other models on the download page: Sigma and Analog Devices Inc. tried those but come back an alert of recognition.

  Someone had this problem as well? My best guess is that it's just maybe a problem with the version of the driver...

  Hi guys

  I think I have an answer to your problems small software ;)

  The Tecra M9 certainly supports the ALC262 Realtek High Definition Audio.
  Compatible audio driver can be downloaded from the Web from Toshiba site or the Web to Realtek site.

  OK now to the solution

  The solution is very simple.
  You must first install the two XP patches; KB888111 and KB835221
  This must be done before installing the audio driver.

  Usually, this should solve your problem

• install wondows 95 on a xp system, drive will not format or change NTFS in fat

  Hiya,
  Here are the current specifications for my computer,

  Microsoft windows xp professional,
  service pack 3

  Intel pentium 4 cpu 3.00 GHz
  512 MB of RAM

  Basically, I want the computer to work with a windows 95 OS instead of xp, (I have a boot cd)

  I tried different ways to format my hard drive,
  (booting from the xp disk, start the recovery console, giving the correct command request to start the format of drive c while changing storage type of ntfs to fat and when the format is complete I exit console early my computer and my xp is still running with all my files still saved)

  I also tried with the computer in xp by clicking on my computer and try to format the hard drive manually but it gives an error message saying "unable to complete the format".

  I'm to be stupid and do this wrong or is a problem of it is not not possible on my current setup?
  It would be appreciated if someone could help me or come to any solution as to how I can get 95 running if

  Hi Lewiscolli,

  Windows 95 (and their related components) will rise to a status not supported. After this date, Microsoft no longer provides incident support options or security updates. Microsoft does not offer an agreement of support for these products.

  If you have always wanted to install Windows 95 on Windows XP, you can format the disk on which you want to install the new operating system (OS) with the help of the Windows XP disc. You can format the drive in FAT instead of NTFS format, then you can install the Windows 95 operating system using the disc.

  You can follow the below mentioned article for more information:

   

  Choice between NTFS, FAT, and FAT32

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/choosing_between_ntfs_fat_and_fat32.mspx?mfr=true

  Hope this information help.