PSC 1400v 'check ink cartridges' seeing rest even with new cartridges

Similar Questions

• Photosmart c3150 check ink cartridge blink after replacing the cartridge

  Almost every time I have to replace a cartridge check ink cartridge blinking and I can not find anything wrong.

  If the led check cartridge blinking after changing a cartridge, then there is a document with steps to help solve this problem. The document can be accessed here.

  Hope this helps Richard.

• "remove and check ink cartridges" error on HP 2401

  ORIGINAL TITLE: Print printer print

  Recently, I replaced print cartridges on my HP 2401 printer.  Printer has worked for a few weeks, and now an error that says: "remove and check print cartridges.  I did this (interface buvardages print cartridge on paper towel) and put them back in, but get the same error.

  When I replaced the cartridges a couple of weeks, it does not ALIGN cartridges at startup.  Costco using refills... suggestions?
  Ron

  Hi Ron Flamm,

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Error message: remove and check ink cartridges
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&DocName=c00054462

  Remove and check cartridge

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00042821

  I suggest you to contact Hp to know that the problem is with the printer.

• HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

  Our HP Photosmart C6280 has always produced excellent results, but all of a sudden it won't print Magenta or Light Magenta, although they show of 75%.  We even tried to put in new ink cartridges, but they still does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  HP - Photosmart C6280 - Product Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart C6280<- set="" to="" your="" version="" of="" windows="" for="" the="" proper="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  These might help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP photosmart 5520 print do not correctly even with new ink

  I replaced the ink of color and black ink (364 cartridges). I have no error message or anything of what I see wrong. It is a wireless printer and when I print it always printed as ink cartridges are empty. Especially the black, when you're printing is a pinkish color. I took the cartridges and replace them in numerous amounts of times, and it seems to always print the same way. I don't know how to check the printer heads to see if it is causing the problem.

  Hello Daniellehenshaw,

  I'm sorry to hear that you are experiencing printing problems. I found the following troubleshooting steps for the e-all-in-one printer HP Photosmart 5220 which may help.

  http://support.HP.com/us-en/document/c03955472

  Please note that you have already completed the first few solutions suggested by replacing your cartridges and putting back them in place.

  I hope that one of the other suggested solutions work for you.

  Kind regards

  Lynn_B

• Printer cannot print black, even with new ink

  Original title: cannot print in black

  I cannot print black on my printer.  I changed printers, ink cartridges and tried printing in different programs such as Word, wordpad and Excel.  Other black print colors just not.  Can someone tell me what is the problem?

  When you installed the printer cartridge, did you remove the protective sticker on the cartridge? Sometimes people forget to remove this and install the cartridge.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Re: HP Photosmart 5514 won't print black even with new cartridge

  I have the same problem.   I also used 2 ink cartridges.  Come on HP and find a solution or a reminder.  Your name is sali in anything but black ink here.

  @rfrice4

  My apologies for the delay. I will send you a private message (departure from the envelope at the top on the right)

• Photosmart C620 don't print black... not even with new cartridge

  Have tried everything that your support page & help screens indicate:

  was originally only print up several inches of page

  now does not print any black text

  unplugged

  Diagnostics pages... shows no diagnosis, no black square, the squares of color are very sharp

  test pages are empty

  printer is not installed

  reinstalled printer

  clean the heads

  bought the new black print cartridge

  STILL NO BLACK...

  C6280 has the printhead and ink cartridges that are separated. This resembles the printhead may be bad clogged or has failed.

  I would say try "clean printhead" a few times more, if still no black not printed, the print head may have reached its endoflife.

• Align the PSC 750 printer ink cartridge error message.

  I just replaced only the black cartridge in my printer PSC 750.  (Will replace the color cartridge later as my money allows.) The printer is connected to my laptop, MacBookPro, under OS X, version 10.6 operating system.  After replacing the cartridge, I ran a self-evaluation report.  It seemed to run correctly.  No color cartridge only test model because there is no ink in the cartridge.  Then I ran the process to align the print cartridge which gives an error on the printer.  It displays "error: Align page not detected" when I clearly placed the page alignment on the scanner glass.  Tried this process several times and each time I get this error message.

  Could it happen because I have not yet replaced the color cartridge?  If not, then what?

  Alignment requires the black and cyan (or was it yellow on this model?) part of the color cartridge to print for correct alignment.  If you have an old copy of the alignment page you can use it, although the alignment would be suboptimal.

  Soak the printhead of the cartridge 78 in 1 "hot water for ten minutes and then gently the printhead from drying and put it back in the printer may allow enough ink complete the alignment page.

• PIXMA MG5320 stopped printing black even with new cartridge and a deep cleaning. The colors are OK.

  Some time previously, failure to print quality settings, black would go a little weak on the last few lines of a full page of text. If there are more pages, each would start very well but have the same poor quality near each bottom of page. I changed the setting of the standard high quality & the problem seemed fixed. Just course several days showed poor quality at the bottom of the pages. Today, black does not print. I did 2-3 deep cleanings with a new cartridge, but still no black. Color printing very well. I need to replace the print head?

  Hi PMHilton,

  Given that black ink is printing is no longer and to replace the ink tank and perform deep cleanings have not solved the problem, the printer may require repair.  We ask that you call please 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays) for assistance.  A Canon technical support representative will be happy to help you.  There is no charge for this call.

• HP Photosmart C310 print black even with new cartridge

  HP Photosmart C310 cannot print black. Replace the cartridge and ran clean printhead multiple times. Still nothing. Print head alignment failed. Printer does not turn off with power button. Recycled/restarted by pulling out the plug, count to ten and reconnect it.

  Nothing changes except power button works again.

  The steps in this post can help.

• Satellite A100-225 is not charging even with new battery

  Hi, having a problem of load. Laptop turns off suddenly while using. Tried to start but power light turns off and it stops again. With connected battery and ac adapter on the power light blue and yellow light of the battery lit a few seconds and then stops, not allowing does not start up.

  The old battery thinking it was this and my laptop starts fine just using the AC adapter because it is how I am currently this announcement. Replace the battery and the power light comes and turns off again every few seconds and prevents the starting upwards.

  Bought a new battery thinking it was defective, but nothing helped, exactly the same problem.
  Let the laptop to charge that battery again noticed but light blue and yellow power battery light goes on and out together all few seconds.

  If I try to start the laptop while the power led is turned on, it begins to start but as soon as the power light turns off, it stops. My thoughts are the unit load inside my laptop is in short-circuit, but I'm no expert.

  Anyone have any idea what the problem is, and it would be expensive to fix as I just spent £48 on a new battery for e.

  Thanks Mick

  > Back up battery and the power light comes and turns off again every few seconds and prevents the starting upwards.

  Are you sure that the battery is compatible? did you buy the genuine battery from Toshiba ASP?
  I think that 3rd party retailer batteries may not always be compatible so I would test the laptop with a battery that is recommended by Toshiba.

  On the other hand, it could be a motherboard problem, but if the notebook starts successfully by using the AC adapter, I wouldn't quite sure if he s really a motherboard problem.

  Also try this:
  Remove the battery and adapter, press the power 30 sec long.
  Then insert the battery and connect AC adapter and check if you could power the unit up.

• My mobile mouse 3000 does not work even with new battery, no green light on USB, when connect to the system, it says unknow device USB

  the system says: one of the USB connected to the computer with multifunctioned, and windows does not recognize it.

  Hello

  · What is you receive the exact error message?

  Follow the steps in the links below and check if this can help: Troubleshoot failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot the failure to find new mouse connected to your USB port: http://support.microsoft.com/kb/223256

• Suddenly, my magic mouse not, turn on even with new batteries.

  Magic mouse does not light

  Are the batteries installed correctly (polarity?) If Yes, then you may need a new mouse.

• Microsoft 5000 wireless mouse does, even with new batteries

  My wireless mouse was running perfectly for a while, and then for a few days the wheel flickered red (no message on the screen). He then stopped working all together. I replaced the batteries, but it not - light at all! No lights or anything like that. Meanwhile, the keyboard still works perfectly.

  16 March 2015 it is today and I was able to find the problem (at least for me).

  Remove the two batteries and then re-install.

  Apparently when replace you them one at a time, the system becomes confused or something (I don't know, as I'm not an engineer). If you get them both at the same time and * then * begin replacing them, it seems to work fine.

  Weird, I know.