Microsoft Keyboard print fades
It's the second microsoft keyboard I bought and it does the same thing as the first - the letters/numbers disappear more I use it. Does anyone else have this problem?
As I'm not a touch typist there are only so many letters that I remember when the keys are empty! I don't understand this at all. It is obviously not a technical problem, but it is a problem and that microsoft should be aware of and try to remedy.
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
"childerberry" wrote in message News: 59ca 5207 - a82f - 4 c 09-a38e-325d695adf44...It's the second microsoft keyboard I bought and it does the same thing as the first - the letters/numbers disappear more I use it. Does anyone else have this problem?
As I'm not a touch typist there are only so many letters that I remember when the keys are empty! I don't understand this at all. It is obviously not a technical problem, but it is a problem and that microsoft should be aware of and try to remedy.
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
Tags: Windows
Similar Questions
-
Hello, I bought a MS Keyboard with Finger Print Reader (product ID: 75913-545-1980296-00611) recently of a *. May Hae product on a shelf for some time. I have Windows 7 on my PC and the instalation software says it's incompatible. Have you folks instalation software compatible for your product? E-mail address is removed from the privacy * I am a technician certified a +. If you could direct me to the right site with the appropriate software, or email it to me, I would appreciate it. Thanks for any help you can give. Sincerely, Frank Nunally
Hello, I bought a MS Keyboard with Finger Print Reader (product ID: 75913-545-1980296-00611) recently of a *. May Hae product on a shelf for some time. I have Windows 7 on my PC and the instalation software says it's incompatible. Have you folks instalation software compatible for your product? E-mail address is removed from the privacy * I am a technician certified a +. If you could direct me to the right site with the appropriate software, or email it to me, I would appreciate it. Thanks for any help you can give. Sincerely, Frank Nunally
This is a forum for peer-to-peer and this product is not compatible with Windows 7 - so - don't. Microsoft is not what you need. Should have read the list of compatibility (operating systems) probably printed on the box.
But be sure to check here:
http://www.Microsoft.com/hardware/en-us/support -
This morning Thunderbird stopped accepting strikes, including all letters and the delete key, since my Microsoft keyboard. I downloaded the latest version, but the problem persists. Can anyone help? Thank you. Rob
Some have reported that one or more times by pressing F9 + Windows has worked to solve problems with the keyboard does not.
-
Can't find a keyboard print screen button W510
I just pulled a new W510 laptop today and can't seem to find the print screen key. Any help with this?
Thank you
Hey douga and welcome to the forum.
I don't know if the keyboard is very different between countries, but on my keyboard print screen is named "PrtSc" and it to the right of the power button and just above the F9 key.
Did you find this key?
Gan
-
Microsoft Keyboard Elite for Bluetooth problem
I have had and used the Elite and Intellimouse keyboard for many years. My keyboard has recently developed a problem. I am able to recognize and install it, but it does not 'Connected', such as the IntelliMouse. Or it does not show recently used. The only information shown in the Bluetooth Panel is Microsoft Keyboard and password activated.
The mouse shows Microsoft Mouse, no password, connected.
When I select the keyboard and click on properties, then on services, the drivers for keyboard, mice, etc (HID) box is not checked. I check it, then hit apply, and I get the error Service Bluetooth "access denied."
I was able to install the keyboard on another computer and it works fine. The support of bluetooth and bluetooth services seem to work fine as well. I've uninstalled and reinstalled the drivers for the keyboard and the mouse and the mouse still works fine but no resolution on the keyboard. I am running XP SP3 on my computer, and it has all the latest updates and drivers that I can find. In addition, I was the software updates when the keyboard stop working. Very well, I was typing a moment and the next day, that he had just left.
Suggestions on how to proceed?
After almost 7 months together trying to figure out this I finally got mine to work! After reading the post from Yawp73, I didn't uninstall my old version of Microsoft Keyboard Elite for Bluetooth and reinstalled the latest version of Microsoft. When I went to add devices and I saw the keyboard icon, click on it instead and press 'next' to put in the passcode, I right click it and went to properties, then services and CHECKED the box for the drivers for keyboard, mice, etc.. After hitting applied, my elite keyboard started working without even putting a pass code! YES! THANKS Yawp73! I really hope that it works for everyone because this question drove me INSANE! Good luck!!!
-
Original title: keyboard problem.
My Microsoft keyboard is programmed to check the spelling in French. How can be changed to English?
Hi JudithReep,
You can try to change the display language to English. Later, check to see if the problem persists.
For more information, see these links: Regional and Language Options overview
How to add and enable additional languages in Windows?
HOW to: Change the Date, time, number, and currency value displays in Windows XP?
Hope the helps of information.
Please post back and we do know. -
Who knows what the solution to the message "Microsoft keyboard driver has stopped working?
Who knows what the solution to the message "Microsoft keyboard driver has stopped working?
Hi Raymond,
Thanks for the quick response.
The question you posted would be better suited in the Logitech Forums. I would recommend posting your query in the keyboard Logitech Support.
Keyboard Logitech support
http://www.Logitech.com/en-us/support/keyboards
If you need further assistance on all issues related to Windows, just tell me and we will be happy to help you.
-
Microsoft Sidewinder x 4 keyboard and program Microsoft Keyboard in Vista
I just connected a Microsoft Sidewinder x 4 keyboard in Vista after installing Intellitype 7.1. The Microsoft Keyboard program continues to show an old "Wireless Desktop Elite Keyboard' as a default. I changed the Sidewinder keyboard, but as soon as I click OK in the Microsoft Keyboard window, it restores the old wireless keyboard (is no longer attached) when I opened the window. I uninstalled all the keyboards in the Device Manager and rebooted Vista. I have also uninstalled and reinstalled Intellitype with no luck. Can someone help? Thank you.
Yep, a clean install would do :-)
A test, I plugged my X 4 my laptop Win7. He found as a "composite input device", but the bank lights do not come, so I guess that it relies on the software to make them work. I didn't install Intellitype, so I still think there is a problem with the installation of the software on your computer. You can download and install Revo Uninstaller, I have mentioned earlier, it allows to eliminate all traces of Intellitype, reboot, and reinstall. I think that even without the software installed, there will be always an HID input device listed in Device Manager, but not two. If I had the PC here, I would like to try it, but I'm in no hurry for the time or anything since I am retired :-)
SC Tom
-
Good afternoon
Laptop of my administrator has a file tcpmon.ini which is apparently corrupt.
When I ran ' sfc/scannow' and then checked the logfile C:\Windows\Logs\CBS\CBS, I found 4 lines that State tcpmon.ini is not repairable. I copied these 4 lines in the CBS log file and then paste directly below:
===========================================================
2009-12-31 09:59:49, CSI Info 0000013 c [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "2009-12-31 09:59:52, CSI Info 0000013e [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2009-12-31 10:02:53, 000001bd CSI Info [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2009-12-31 10:02:53, 000001bf CSI Info [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
===========================================================I ran ' sfc/scannow' in normal windows mode also ran ' sfc/scannow' in safe mode without network. In both cases, I get message «cannot repair... tcpmon.ini...» "in the CBS log file. I did a complete virus scan (w / Symantec), and no viruses were found. I ran a full sweep of Windows Defender, and found no malicious or unwanted software.
The network card is a "Broadcom NetXtreme 57xx Gigabit Controller", and I've recently updated to the latest version of the driver (Driver Version: 12.2.0.3;) Driver date: 28/05/2009. Driver provider: Broadcam). The driver update did not set the tcpmon.ini file.
I have to uninstall and reinstall the network adapter to fix the tcpmon.ini file? Or y at - it another way of difficulty tcpmon.ini? Can I generate and post a hijackthis log?
Thanks for any help.
Plug on the laptop with the corrupted tcpmon.ini file:
Dell Precision M6400
Windows Vista Ultimate SP2
Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz GHz 2.54
RAM: 2.00 GB
System type: 32-bit operating systemHello
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
-------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Activate a medium custom keyboard Microsoft keyboard layout creator 1.4
Hello
I'm trying to creat a custom keyboard to place the letters where I want that they in a farsi/Persian keyboard.
After days of searching I creative cam of microsoft keyboard layout 1.4 I have installed this and created the layout I want. I was also told that to do this I need Microsoft .NET Framework 2.0, which I also installed.
the only problem is that I can't get this new keyboard that I did with the creator of with other keyboards keyboard layout in the language of the control panel settings.
Hi wiseman3,
Please see this link with some useful information and links:
http://msdn.Microsoft.com/en-us/goglobal/bb964665.aspx
If you need additional support, thanks for posting questions here:
http://social.msdn.Microsoft.com/forums/en-us/categories
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
With the help of Microsoft Keyboard Layout Creator 1.4 (last) and need Numpad
So I'm on Windows 7, using a Vostro 3446 with no paved hard dog digital, dedicated numeric keypad or NUMPAD FN (FN/UIO-JKL, like on a Dell D800).
I found this program, but I'm wondering 2 things
-I want to use the keys FN + Key or icon + Windows key
-I want to be able to use all functions on numeric keypad, I do not have (I have PgDn, PgUp, Home, End) which are Num0-9, NumLock to add, subtract, divide and multiple are not necessary, but if I would be good
-Would I any Type in "NUM1", 'NUM2', etc. or Ref. as "VK_OEM_102" in the pop-up window, and if this number is therefore NUM0-9
So far the format ' NUM ',?? (The number) and the "VK_NUMPAD?" format does not work
Are these it (I had to IsKeyPressed - GECK) cause during the test, there was insert 'NUM0-9' not the real number (let me try hexadecimal)
0 X 47 71 NUM7
0 48 72 NUM8 X
0 X 49 73 NUM9
0X4A 74 NUM-
0X4B 75 NUM4
0X4C 76 NUM5
0X4D 77 NUM6
0X4E NUM 78 +.
0X4F 79 NUM1
0 50 80 NUM2 X
0 51 81 NUM3 X
0 52 82 NUM0 X
53 83 NUM 0 X.Or are these he (http://www.kbdedit.com/manual/low_level_vk_list.html) cause VK_NUMPAD0-9 do not work due to the limit of 4 characters
VK_NUMPAD0 0 x 60 NUMPAD 0 VK_NUMPAD1 0x61 NUMPAD 1 VK_NUMPAD2 0 x 62 NUMPAD 2 VK_NUMPAD3 0 x 63 NUMPAD 3 VK_NUMPAD4 0 x 64 Numeric keypad 4 VK_NUMPAD5 0 x 65 NUMPAD 5 VK_NUMPAD6 0 x 66 Numeric keypad 6 VK_NUMPAD7 0 x 67 Numeric keypad 7 VK_NUMPAD8 0 x 68 Numeric keypad 8 VK_NUMPAD9 0 x 69 Numeric keypad 9
VK_NUMLOCK 0 X 90 Numlock It is anyway they would update the program or y at - it a way to specifically tell the application to use the numeric keypad as how Microsoft Office uses special characters to search & replace "Enter/Return".
I think that's what I should ask what is the Point of Code for the keypad (as Google thinks I'm looking for special characters)?
Help > code point - a digital reference in a coding. In Windows, this is usually the numeric Unicode character value. Microsoft Keyboard Layout Creator can accept Unicode code points like "U + # ' or '\x###' values.
According to the program 4, NUM4 and 0 x 64 are all the 4 is 4 and Numpad 4 the same cause I use a mod that needs NUM4 and does not meet the 4
Hello
Welcome to the Microsoft community. Sorry for the delay in responding.
Please take a look at this article and check if that helps.The Microsoft Keyboard Layout Creator
You can also post your request here for better assistance.
-
Use of Microsoft Keyboard Elite 1011
I have a Microsoft Keyboard Elite model 1011. I don't know how to use the special keys at the top of the chessboard, start by seeing the favourites thanks to my favorites until the end of the top row who is Messenger. However, the keys of the calculator, close the session and the sleep function. How to me ful use of another?
Hi Robert,.
Thanks for posting your query on the Microsoft Community.
I understand that you want to learn the features of your Microsoft Keyboard Elite 1011.
I suggest you to send your query to Microsoft Hardware forum for help with the Microsoft hardware problem.
http://www.Microsoft.com/hardware/en-us/support
Thank you.
-
Support for Microsofts and printer is not recognized and said that it must be declared
Original title: Declare the printer in vb
Hello
Follow-up
HOW to: Trigger and control Visual Basic print dialog boxes
Support Microsofts and printer is not recognized and said that it must be declared. I tried their code for the example and it still says that this printer is not declared
Thank you
Dan
Hi Daniel,.
Thanks for posting your query in Microsoft Community.
I appreciate the effort you have taken to solve this problem yourself.
This problem is better suited in the MSDN forum. We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in MSDN forum.
https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral
Thank you.
-
I created my keyboard with "Microsoft keyboard layout creator v.14" and I create the package. It works fine but does not display the name of my keyboard on the language bar on the taskbar
Hello
Follow these steps and check if that helps.
(a) click Start and type area and the language in the search bar and press to enter.
(b) go to keyboards and languages tab.
(c) click on change keyboards.
(d) now, click Add.
(e) now under any input language, you have chosen who find and choose keyboard.
(f) ensure that all options are listed.
(g) if there is a check mark in the United States remove it and place a check next to the language and click Ok.
(h) now you can check cross if the preview shows you the correct layout.
-
Microsoft Keyboard Layout Creator on Windows 7 Setup error
I'm having a problem to install the .dll file that gives the creator of page layout
It gives me the error
the installer was interrupted before in the United States (custom) can be installed. You must restart the installer to try again.I've searched around, but the only solution people had had to turn on IIS 6 compatibility, but that has not workedSince I was the. DLL file couldn't I just put in a directory?Hello
Thank you to contact the community Microsoft and we will be happy to help you with your concern.
According to your description, I understand that you can not install Microsoft Keyboard Layout creator and you get an error message about the corruption of .dll files.
Where you download it go?
Please see the link below:
http://msdn.Microsoft.com/en-us/goglobal/bb964665.aspx
Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.
Maybe you are looking for
-
These 2 plugins are not needed?
-
XPRT: Updated help with 4.1.15
Hello I tried to install the latest update for my XPRT but it crashed during the process. I had to pull the battery to get back on and now I've lost all of the home screen. I see the status bar, but everything else is black. There is a lockscreen, bu
-
Modification of user passwords / privileges via API
I work with the API user in a custom user Manager utility to perform all the basic operations of an admin of luminaire (create, modify, delete). Above all, the tool is very simple, but I'm looking to see if anyone else has experienced two elements th
-
Dedicated for each channel from multiple channels in a single task task disadvantage
Hello My current acquisition software (C + c++ / GCC) encapsulates the methods rather clumsy niDAQmx C to interface with the data acquisition equipment in a class that represents a task of acquisition. This way I can create several instances, for exa
-
can't rotate pictures in the windows fax and picture viewer
I can't rotate my JPEG images in Windows Picture and Fax Viewer, I tried a number of different solutions, but none worked. Whenever I try to rotate an image saved on my memory stick it freezes. I also unchecked read-only and it reacts always not als